JNK3-IN-10 是一种不可透过血脑屏障的 JNK3 抑制剂(IC50=0.257 nM),对 JNK1 的选择性超过 400 倍,可阻断 TGF-β1 下游的 JNK3 介导信号通路,抑制 TGF-β1 诱导的 c-Jun 磷酸化,减少促纤维化标志物的表达,并恢复上皮蛋白 E-钙粘蛋白(E-cadherin)的表达,具有低细胞毒性、抗纤维化、细胞保护和肾脏保护作用,可缓解白蛋白尿、肾小球硬化和足细胞足突融合,可用于慢性肾脏病、肾小球硬化、阿霉素诱导的肾病的研究。
产品编号: MS-G35122 CAS No.: 3085181-00-3 分子式: C24H24Cl2N8O2S 分子量: 559.47
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

JNK3-IN-10 是一种不可透过血脑屏障的 JNK3 抑制剂(IC50=0.257 nM),对 JNK1 的选择性超过 400 倍,可阻断 TGF-β1 下游的 JNK3 介导信号通路,抑制 TGF-β1 诱导的 c-Jun 磷酸化,减少促纤维化标志物的表达,并恢复上皮蛋白 E-钙粘蛋白(E-cadherin)的表达,具有低细胞毒性、抗纤维化、细胞保护和肾脏保护作用,可缓解白蛋白尿、肾小球硬化和足细胞足突融合,可用于慢性肾脏病、肾小球硬化、阿霉素诱导的肾病的研究。

生物实验数据

生物活性 JNK3-IN-10 is a blood-brain barrier-impermeable JNK3 inhibitor (IC50=0.257 nM) with over 400-fold selectivity for JNK1, which blocks the JNK3-mediated signaling pathway downstream of TGF-β1, inhibits TGF-β1-induced c-Jun phosphorylation, reduces the expression of pro-fibrotic markers, and restores the expression of the epithelial protein E-cadherin; it exhibits low cytotoxicity, anti-fibrotic, cytoprotective, and renoprotective effects, alleviates albuminuria, glomerulosclerosis, and podocyte foot process effacement, and can be used for research on chronic kidney disease, glomerulosclerosis, and doxorubicin-induced nephropathy.
IC50 & Target JNK3 (human):0.257 nM
体外研究
(In Vitro)

JNK3-IN-10 (Compound 14bg) (1 μM; 预孵育 20 min, 与 ATP 共孵育 2 h) 对 JNK1、JNK2 和 p38α 的选择性分别为 84 倍、472 倍和 194 倍,且在 1 μM 浓度下的脱靶激酶活性极低。
JNK3-IN-10 (1 μM; 30 min; 37 °C) 在人肝微粒体中表现出中等微粒体稳定性,37 °C 孵育 30 分钟后仍有 64.63% 的残留。
JNK3-IN-10 具有较低的血脑屏障 (BBB) 通透性,其 Pe 值为 0.52×10-6 cm/s,被归类为 BBB 非通透性化合物。
JNK3-IN-10 (5 μM; 预孵育 1 h) 可抑制 TGF-β1 诱导的分化人足细胞中 c-Jun 磷酸化、促纤维化标志物 (PAI-1、COL1α1) 表达,且不降低细胞活力。

ELISA Assay

Cell Line: Differentiated human podocytes
Concentration: 5 μM
Incubation Time: 1 h pretreatment
Result: Suppressed TGF-β1-induced phosphorylation of c-Jun.
Showed no cytotoxicity, with cell viability remaining at control levels.

Western Blot Analysis

Cell Line: Differentiated human podocytes
Concentration: 5 μM
Incubation Time: 1 h pretreatment
Result: Attenuated TGF-β1-induced upregulation of PAI-1 and COL1α1.
Restored E-cadherin expression to near-basal levels.
体内研究
(In Vivo)

JNK3-IN-10 (Compound 14bg) (2-6 mg/kg; i.p.; 每周 3 次; 2 w) 可显著缓解阿霉素 (HY-15142A) 诱导的雄性 BALB/c 小鼠肾损伤、白蛋白尿、肾小球硬化及足细胞损伤,且无全身毒性。

Animal Model: BALB/c (male, 8 weeks old, chronic kidney disease induced by single intravenous injection of Adriamycin at 12 mg/kg)
Dosage: 2 mg/kg; 6 mg/kg
Administration: i.p.; three times per week; 2 weeks
Result: Significantly restored serum albumin levels and tended to reduce blood urea nitrogen (BUN) levels compared to untreated Adriamycin-injected mice.
Reduced urinary albumin-to-creatinine ratio, collagen-positive area, and glomerulosclerosis scores.
Decreased podocyte foot process effacement and preserved glomerular basement membrane structure.
Reduced Adriamycin-induced phosphorylation of c-Jun, suppressed upregulation of α-SMA and Col1α1, and partially restored E-cadherin expression in renal cortical tissues.
Downregulated fibrotic (α-SMA, Col1α1) and epithelial-mesenchymal transition-associated transcripts, with a trend toward recovery of podocyte-specific markers (E-cadherin, synaptopodin).
Showed no systemic toxicity.

化学信息

分子量 559.47
分子式 C24H24Cl2N8O2S
CAS No. 3085181-00-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础