Amiloride

Synonyms: 阿米洛利; MK-870
Amiloride (MK-870) 是上皮钠通道 (ENaC) 和尿激酶型纤溶酶原激活物受体 (uTPA) 的抑制剂,同时也是 polycystin-2 (PC2; TRPP2) 通道阻断剂。
产品编号: MS-G26615 纯度: 99.96% CAS No.: 2609-46-3 分子式: C6H8ClN7O 分子量: 229.63
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Amiloride (MK-870) 是上皮钠通道 (ENaC) 和尿激酶型纤溶酶原激活物受体 (uTPA) 的抑制剂,同时也是 polycystin-2 (PC2; TRPP2) 通道阻断剂。

生物实验数据

生物活性 Amiloride (MK-870) is an inhibitor of the epithelial sodium channel (ENaC) and the urokinase-type plasminogen activator receptor (uTPA), and is also a blocker of the polycystin-2 (PC2; TRPP2) channel.
IC50 & Target

ENaC; uTPA; polycystin-2(TRPP2)

体外研究
(In Vitro)

Amiloride blocks δβγ channels with an IC50 of 2.6 μM (58, 71, 75, 134, 148). The Ki of amiloride for δβγ ENaC is 26-fold that of αβγ channels (0.1 μM for αβγ ENaC). Amiloride blockade of δβγ ENaC is much more voltage dependent compared with the αβγ channel. The Ki of amiloride for δαβγ channels is 920 and 13.7 μM at -120 and +80 mV, respectively, which significantly differs from that of both αβγ and δβγ channels. Amiloride is a relatively selective inhibitor of the epithelial sodium channel (ENaC) with an IC50 (the concentration required to reach 50% inhibition of an ion channel) in the concentration range of 0.1 to 0.5 μM. Amiloride is a relatively poor inhibitor of the the Na+/H+ exchanger (NHE) with an IC50 as low as 3 μM in the presence of a low external [Na+] but as high as 1 mM in the presence of a high [Na+]. Amiloride is an even weaker inhibitor of the Na+/Ca2+ exchanger (NCX), with an IC50 of 1 mM. Amiloride (1 μM) and submicromolar doses of Benzamil (30 nM), doses known to inhibit the ENaC, inhibit the myogenic vasoconstriction response to increasing perfusion pressure by blocking the activity of ENaC proteins. Amiloride completely inhibits Na+ influx in doses known to be relatively specific for ENaC (1.5 μM) in vascular smooth muscle cells (VSMC).

体内研究
(In Vivo)

Amiloride (1 mg/kg/day) subcutaneously is found to reverse the initial increases in collagen deposition and prevent any further increases in the DOCA-salt hypertensive rat. Amiloride delays the onset of proteinuria and improved brain and kidney histologic scores in the saline-drinking, stroke-prone spontaneously hypertensive rats (SHRSP) compared with controls. Amiloride antagonizes or prevents actions of aldosterone in these cells and in cardiovascular and renal tissues in animals with salt-dependent forms of hypertension.

性状 固体
颜色 Off-white to light yellow

化学信息

分子量 229.63
分子式 C6H8ClN7O
CAS No. 2609-46-3
别名 阿米洛利; MK-870

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (435.48 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM4.3548 mL21.7741 mL43.5481 mL108.8703 mL
5 mM0.8710 mL4.3548 mL8.7096 mL21.7741 mL
10 mM0.4355 mL2.1774 mL4.3548 mL10.8870 mL
15 mM0.2903 mL1.4516 mL2.9032 mL7.2580 mL
20 mM0.2177 mL1.0887 mL2.1774 mL5.4435 mL
25 mM0.1742 mL0.8710 mL1.7419 mL4.3548 mL
30 mM0.1452 mL0.7258 mL1.4516 mL3.6290 mL
40 mM0.1089 mL0.5444 mL1.0887 mL2.7218 mL
50 mM0.0871 mL0.4355 mL0.8710 mL2.1774 mL
60 mM0.0726 mL0.3629 mL0.7258 mL1.8145 mL
80 mM0.0544 mL0.2722 mL0.5444 mL1.3609 mL
100 mM0.0435 mL0.2177 mL0.4355 mL1.0887 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础