Antibacterial agent 338

Antibacterial agent 338 (Compound 65) 是一种抗菌剂和 GyrB 抑制剂,对大肠杆菌 GyrB 的 IC50 为 12.60 nM,它通过结合大肠杆菌 GyrB 的 ATP 结合域抑制其 ATP 酶活性,对多重耐药革兰氏阴性菌具有广谱抗菌活性,可降低中性粒细胞减少小鼠大腿感染模型中的细菌载量,并可用于鲍曼不动杆菌感染的研究。
Antibacterial agent 338
产品编号: MS-G20297 分子式: C25H28FN9O 分子量: 489.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antibacterial agent 338 (Compound 65) 是一种抗菌剂和 GyrB 抑制剂,对大肠杆菌 GyrB 的 IC50 为 12.60 nM,它通过结合大肠杆菌 GyrB 的 ATP 结合域抑制其 ATP 酶活性,对多重耐药革兰氏阴性菌具有广谱抗菌活性,可降低中性粒细胞减少小鼠大腿感染模型中的细菌载量,并可用于鲍曼不动杆菌感染的研究。

生物实验数据

生物活性 Antibacterial agent 338 (Compound 65) is an antibacterial agent and GyrB inhibitor with an IC50 of 12.60 nM against Escherichia coli GyrB that binds to the ATP-binding domain of E. coli GyrB to inhibit its ATPase activity, exhibits broad-spectrum antibacterial activity against multidrug-resistant Gram-negative bacteria, reduces bacterial burden in a neutropenic mouse thigh infection model, and can be used for research on Acinetobacter baumannii infection.
体外研究
(In Vitro)

Antibacterial agent 338 (0.038-10000 nM; 60 min) 可强效抑制大肠杆菌 (E. coli) DNA GyrB ATP 酶活性,其 IC50 为 12.60 nM。
Antibacterial agent 338 (0.03-64 μg/mL; 18-20 h) 对多重耐试剂革兰氏阴性菌具有广谱抗菌活性,其中对多重耐试剂鲍曼不动杆菌 Aba-2024-D2-018 的 MIC 为 0.5 μg/mL。

体内研究
(In Vivo)

Antibacterial agent 338 (10-20 mg/kg;静脉注射;单次,一日两次) 在中性粒细胞减少小鼠体内对多重耐药鲍曼不动杆菌表现出剂量依赖性的体内效果。

Animal Model: ICR (half male and half female, 18-22 g, neutropenic via cyclophosphamide injection)
Dosage: 10 mg/kg; 20 mg/kg; 20 mg/kg (two doses 6 hours apart)
Administration: i.v.; single dose; two doses 6 hours apart
Result: Achieved a bacterial burden reduction comparable to positive controls (levofloxacin and compound 9) at 20 mg/kg.
Produced a 2.65-log10 CFU/g reduction in bacterial burden.
Produced a 4.57-log10 CFU/g reduction, corresponding to >99.99% bacterial eradication, with bacterial burden reduced to pretreatment levels.

化学信息

分子量 489.55
分子式 C25H28FN9O

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础