FLT3-IN-32 hydrochloride

FLT3-IN-32 hydrochloride 是一种强效且口服有效的 FLT3 抑制剂,对 FLT3-ITD、FLT3-D835Y 和 FLT-N676K 的 IC50 值分别为 0.29 nM、0.77 nM 和 2.07 nM,它通过降低 FLT3 及其下游信号分子(STAT5、MAPK、AKT)的磷酸化来诱导 FLT3 突变 Ba/F3 细胞凋亡(apoptosis),在 MV4-11 异种移植模型中具有强大的抗肿瘤效果,可用于急性髓性白血病(AML)的研究。
产品编号: MS-G04237 CAS No.: 3047195-66-1 分子式: C28H30ClN5O5 分子量: 552.02
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FLT3-IN-32 hydrochloride 是一种强效且口服有效的 FLT3 抑制剂,对 FLT3-ITD、FLT3-D835Y 和 FLT-N676K 的 IC50 值分别为 0.29 nM、0.77 nM 和 2.07 nM,它通过降低 FLT3 及其下游信号分子(STAT5、MAPK、AKT)的磷酸化来诱导 FLT3 突变 Ba/F3 细胞凋亡(apoptosis),在 MV4-11 异种移植模型中具有强大的抗肿瘤效果,可用于急性髓性白血病(AML)的研究。

生物实验数据

生物活性 FLT3-IN-32 hydrochloride is a potent and orally active FLT3 inhibitor with IC50 values of 0.29 nM, 0.77 nM, and 2.07 nM against FLT3-ITD, FLT3-D835Y, and FLT-N676K, respectively, which induces apoptosis in FLT3-mutant Ba/F3 cells by reducing the phosphorylation of FLT3 and its downstream signaling molecules (STAT5, MAPK, AKT), exhibits potent antitumor efficacy in the MV4-11 xenograft model, and can be used for research on acute myeloid leukemia (AML).
IC50 & Target

STAT5

 

Akt

 

体外研究
(In Vitro)

FLT3-IN-32 hydrochloride (Compound 29c) (0-100 nM, 72 h) 对肝细胞 HepG2、肺癌细胞 NCI-H460 和内皮细胞 HMEC-1 无细胞毒性,仅特异性抑制表达不同 FLT3 抗性的 Ba/F3 pMIY 细胞 (ITD-突变 NPOS,TKD-突变 D835Y,ITD-突变 NPOS 和 TKD-突变 D835Y,ITD-突变 NPOS 和 TKD-突变 N676K)。
FLT3-IN-32 hydrochloride (1-500 nM, 4-48 h) 通过降低 FLT3 磷酸化诱导 Ba/F3 pMIY 细胞凋亡。

Apoptosis Analysis

Cell Line: Ba/F3 pMIY cells expressing different FLT3 resistance (ITD-Mutation NPOS, TKD-Mutation D835Y, ITD-Mutation NPOS and TKD-Mutation D835Y, ITD-Mutation NPOS and TKD-Mutation N676K)
Concentration: 5, 20, 100 and 500 nM
Incubation Time: 48 h
Result: Dose-dependently induced apoptosis in FLT3-mutated Ba/F3 cells, especially in D835Y and N676K drug-resistant mutants.

Western Blot Analysis

Cell Line: Ba/F3 cells expressing FLT3-ITD(NPOS)
Concentration: 1, 5, 10, 20, 50 nM
Incubation Time: 4 h
Result: Concentration-dependently reduced the phosphorylation of FLT3 and its downstream signaling molecules (STAT5, MAPK, AKT).
体内研究
(In Vivo)

20(R)-Ginsenoside Rh2 (20-75 mg/kg, p.o and i.p., 每日一次共 4-5 天) 在 MV4-11 异种移植小鼠模型中显示出抗肿瘤功效和良好的耐受性。

Animal Model: MV4-11 xenograft model established in female NOD/SCID mice (6-8 weeks)
Dosage: 50 mg/kg
Administration: Oral administration (p.o.), once daily for 5 days
Result: Effectively inhibited tumor growth and prolonged the survival of mice.
Animal Model: Tolerability study established in female NOD/SCID mice (6-8 weeks)
Dosage: 20, 50, 75 mg/kg
Administration: Oral administration (p.o.) and intraperitoneal injection (i.p.) once daily for 4 days
Result: No drug-related deaths.
Experienced transient weight loss, which is recoverable, with no severe clinical symptoms at doses up to 75 mg/kg.

化学信息

分子量 552.02
分子式 C28H30ClN5O5
CAS No. 3047195-66-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础