Pitolisant oxalate

Synonyms: Tiprolisant oxalate
Pitolisant oxalate 是一种有效且选择性的人重组 H3 受体反向激动剂,其 Ki 为 0.16 nM。
产品编号: MS-F97440 CAS No.: 362665-57-4 分子式: C19H28ClNO5 分子量: 385.88
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Pitolisant oxalate 是一种有效且选择性的人重组 H3 受体反向激动剂,其 Ki 为 0.16 nM。

生物实验数据

生物活性 Pitolisant oxalate is a potent and selective inverse agonist of the human recombinant H3 receptor with a Ki of 0.16 nM.
IC50 & Target H3 receptor:0.16 nM (Ki), H3 receptor:1.5 nM (EC50)
体外研究
(In Vitro)

On the stimulation of guanosine 5′-O-(3-[35S]thio)triphosphate binding to this receptor, Pitolisant (BF2.649) behaves as a competitive antagonist with a Ki value of 0.16 nM and as an inverse agonist with an EC50 value of 1.5 nM and an intrinsic activity ~50% higher than that of ciproxifan. Pitolisant displaces [125I]iodoproxyfan binding from mouse brain cortical membranes with an IC50 value of 26.4±4.5 nM. Taking into account the Kd value of the radioligand (161±9 pM), the deduced Ki value for Pitolisant is 14±1 nM. Pitolisant displaces [125I]iodoproxyfan binding from membranes of rat glioma C6 cells stably expressing the human H3 receptor with an IC50 value of 4.2±0.2 nM. Taking into account the Kd value of the radioligand (50±4 pM), the deduced Ki value for Pitolisant is 2.7±0.5 nM. Pitolisant progressively reverses this response with a Hill coefficient close to unity and an IC50 value of 330±68 nM, leading to a Ki value of 17±4 nM. Pitolisant elicits a dose-dependent decrease of the basal-specific [35S]GTPγS binding to membranes with a maximal effect corresponding to 75±1% of the basal-specific binding and an EC50 value of 1.5±0.1 nM.

体内研究
(In Vivo)

The administration of Pitolisantat a single dose of 10 mg/kg 30 min before a single dose of Olanzapine (2 mg/kg b.w.) also significantly affects immobility time in the FST. Subsequent administration of the aforementioned drug sequence in mice statistically significantly increases the duration of immobility in comparison to the time determined in the control group in the FST. It decreased locomotor activity as well. In contrast, the results obtained in subchronic treatment after fifteen administrations of both drugs (Pitolisant 10 mg/kg b.w., and after 30 min Olanzapine 2 mg/kg b.w., and again after 4 h Olanzapine 2 mg/kg b.w.) show that the administration of Pitolisant followed by that of Olanzapine equalized the locomotor activity in mice; in comparison to the level of motility in the control group, to which only Pitolisant is administered. More importantly, this combination of drugs significantly reduces immobility time to the level obtained in the control group in the forced swim test in mice [one-way ANOVA; F (3,20)=4.226,P=0.0181]. Rats given Pitolisant (10 mg/kg) during the conditioning phase stayed 502±94 s on the paired texture, a value not statistically different from that of controls, indicating that Pitolisant did not support place preference.

性状 固体
颜色 Off-white to light yellow

化学信息

分子量 385.88
分子式 C19H28ClNO5
CAS No. 362665-57-4
别名 Tiprolisant oxalate

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 2.5 mg/mL (6.48 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (129.57 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.5915 mL12.9574 mL25.9148 mL64.7870 mL
5 mM0.5183 mL2.5915 mL5.1830 mL12.9574 mL
10 mM0.2591 mL1.2957 mL2.5915 mL6.4787 mL
15 mM0.1728 mL0.8638 mL1.7277 mL4.3191 mL
20 mM0.1296 mL0.6479 mL1.2957 mL3.2393 mL
25 mM0.1037 mL0.5183 mL1.0366 mL2.5915 mL
30 mM0.0864 mL0.4319 mL0.8638 mL2.1596 mL
40 mM0.0648 mL0.3239 mL0.6479 mL1.6197 mL
50 mM0.0518 mL0.2591 mL0.5183 mL1.2957 mL
60 mM0.0432 mL0.2160 mL0.4319 mL1.0798 mL
80 mM0.0324 mL0.1620 mL0.3239 mL0.8098 mL
100 mM0.0259 mL0.1296 mL0.2591 mL0.6479 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础