K134

Synonyms: OPC33509
K134 是一种磷酸二酯酶 3 (PDE3) 抑制剂,对 PDE3A、PDE3B、PDE5、PDE2 和 PDE4 的 IC50 分别为 0.1、0.28、12.1、>300 和 >300 μM。
产品编号: MS-F87443 纯度: 99.76% CAS No.: 189362-06-9 分子式: C22H29N3O4 分子量: 399.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

K134 是一种磷酸二酯酶 3 (PDE3) 抑制剂,对 PDE3A、PDE3B、PDE5、PDE2 和 PDE4 的 IC50 分别为 0.1、0.28、12.1、>300 和 >300 μM。

生物实验数据

生物活性 K134 is a phosphodiesterase 3 (PDE3) inhibitor with IC50 values of 0.1, 0.28, 12.1, >300, and >300 μM against PDE3A, PDE3B, PDE5, PDE2, and PDE4, respectively.
IC50 & Target PDE3A:0.1 μM, PDE3B:0.28 μM, PDE5:12.1 μM
体外研究
(In Vitro)

K134 (K-134) inhibits rat platelet aggregation induced by collagen and ADP in a dose-dependent manner in vitro. The half-maximal (50%) inhibitory concentration (IC50) values of K134 are 2.5 µM and 3.2 µM, respectively. In vitro experiments, K134 also inhibits mouse platelet aggregation induced by collagen and ADP in a dose-dependent manner, and the IC50s are 5.5 µM and 6.7 µM, respectively.

体内研究
(In Vivo)

K134 (K-134) significantly prolongs middle cerebral artery (MCA) occlusion time at doses >10 mg/kg, and reduces cerebral infarct size at 30 mg/kg in the stroke model (n = 12, 87.5±5.6 vs. 126.8±7.5 mm3, P<0.01), indicating its potent antithrombotic effect. The overall bleeding risk of K134 is assessed in general in mice. Single oral administration of K134 does not prolong bleeding time at a dose of 30 mg/kg compared to control (106±5 vs. 110±5 s, not significant). Moreover, a sufficiently high enough plasma concentration of K134 (13.6±2.3 µM) is detected to inhibit platelet aggregation at 10 min after single administration in mice at a dose of 30 mg/kg, which is the same time point as the above test of bleeding time. Next, the effects of PDE3 inhibitors on thrombus formation are also investigated in an arteriovenous shunt model in rats. K134 significantly reduces the incidence of occlusive shunt thrombi at doses above 10 mg/kg (half-maximal effective dose: ED50=11 mg/kg). The plasma concentration of K134 is 0.43±0.08 µM (Cmax) at a dose of 10 mg/kg.

性状 固体
颜色 White to off-white

化学信息

分子量 399.48
分子式 C22H29N3O4
CAS No. 189362-06-9
别名 OPC33509

储存&溶解度

储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (125.16 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.5033 mL12.5163 mL25.0325 mL62.5814 mL
5 mM0.5007 mL2.5033 mL5.0065 mL12.5163 mL
10 mM0.2503 mL1.2516 mL2.5033 mL6.2581 mL
15 mM0.1669 mL0.8344 mL1.6688 mL4.1721 mL
20 mM0.1252 mL0.6258 mL1.2516 mL3.1291 mL
25 mM0.1001 mL0.5007 mL1.0013 mL2.5033 mL
30 mM0.0834 mL0.4172 mL0.8344 mL2.0860 mL
40 mM0.0626 mL0.3129 mL0.6258 mL1.5645 mL
50 mM0.0501 mL0.2503 mL0.5007 mL1.2516 mL
60 mM0.0417 mL0.2086 mL0.4172 mL1.0430 mL
80 mM0.0313 mL0.1565 mL0.3129 mL0.7823 mL
100 mM0.0250 mL0.1252 mL0.2503 mL0.6258 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础