P2Y12 antagonist 2

P2Y12 antagonist 2 是一种有效的 P2Y12 受体 (P2Y12 receptor) 拮抗剂,具有良好的抗血小板聚集作用(IC50 为 2.94 μM),在大鼠氯化铁致血栓模型中具有抗血栓作用,并在大鼠尾出血模型中表现出比 Clopidogrel (MS-O94057) 更佳的安全性,可用于血栓栓塞性疾病的研究。
产品编号: MS-F80526 CAS No.: 2299200-91-0 分子式: C23H24N4O5S 分子量: 468.53
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

P2Y12 antagonist 2 是一种有效的 P2Y12 受体 (P2Y12 receptor) 拮抗剂,具有良好的抗血小板聚集作用(IC50 为 2.94 μM),在大鼠氯化铁致血栓模型中具有抗血栓作用,并在大鼠尾出血模型中表现出比 Clopidogrel (MS-O94057) 更佳的安全性,可用于血栓栓塞性疾病的研究。

生物实验数据

生物活性 P2Y12 antagonist 2 is a potent P2Y12 receptor antagonist that exhibits good antiplatelet aggregation activity with an IC50 of 2.94 μM, shows antithrombotic effects in a rat ferric chloride-induced thrombosis model, demonstrates better safety than Clopidogrel (MS-O94057) in a rat tail bleeding model, and can be used for research on thromboembolic diseases.
IC50 & Target PRP (human):2.94 μM
体外研究
(In Vitro)

P2Y12 antagonist 2 (compound 58l) moderately inhibits CYP3A4 with an IC50 of about 1.5 μM, but exhibits weak inhibition in the other main subtypes (IC50>25 μM).
P2Y12 antagonist 2 does not inhibit hERG even at 40 μM, indicating that it has no QT interval prolongation-related cardiac toxicity.

体内研究
(In Vivo)

P2Y12 antagonist 2 (2.5-80 mg/kg; p.o.; single dosage) decreases thrombus weight in FeCl3 thrombosis model rats.
P2Y12 antagonist 2 (2.5-40 mg/kg; p.o.; single dosage) prolongs the bleeding time in tail-bleeding model rats.
P2Y12 antagonist 2 exhibits great stability in both rat and human liver microsomes with the low clearance values and long half-life [human: T1/2=208.3 min, Clint=10.1 mL/(min g protein); rats: T1/2=89.1 min, Clint=10.6 mL/(min g protein)].
P2Y12 antagonist 2 (5 mg/kg; p.o.; single dosage) exhibits excellent pharmacokinetic properties with relatively low clearance, high plasma exposure and good oral bioavailability in rats.

Animal Model: Male Wistar rats (250-300 g, n = 10; FeCl3 thrombosis model)
Dosage: 2.5, 5, 10, 20, 40 and 80 mg/kg
Administration: p.o.; single dosage
Result: Decreased thrombus weight in a dose-dependent manner with an ED50 of 27 mg/kg compared to that of 7 mg/kg for Clopidogrel (MS-O94057).
Animal Model: Male rats (250-300 g, n = 10; tail-bleeding model)
Dosage: 2.5, 5, 10, 20 and 40 mg/kg
Administration: p.o.; single dosage
Result: Prolonged the bleeding time in a dose-dependent manner.
Animal Model: Male Sprague-Dawley rats (200-220g)
Dosage: 5 mg/kg
Administration: p.o.; single dosage
Result: Pharmacokinetic Parameters of Oral antiplatelet agent 1 (compound 58l) in male Sprague-Dawley rats.
Cmax (ng/mL) T1/2 (h) Tmax (h) AUC0-∞ (ng·h/mL) MRT (h)
p.o. 5 mg/kg 1661 ± 642 2.91 ± 1.09 0.25 4120 ± 2127 3.64 ± 0.18

化学信息

分子量 468.53
分子式 C23H24N4O5S
CAS No. 2299200-91-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础