NVP CXCR2 20 是一种具有镇痛和抗伤害感受活性的选择性 CXCR2 抑制剂,可选择性阻断 CXCR2 信号通路,减轻大鼠慢性缩窄损伤 (CCI) 模型中的机械性和热痛觉过敏,抑制正常小鼠中 CXCL3 诱导的痛觉过敏,并降低 CCI 模型大鼠脊髓和背根神经节 (DRG) 中升高的 CXCL3 蛋白水平,可用于神经病理性疼痛和慢性阻塞性肺疾病 (COPD) 的研究。
产品编号: MS-F74300 CAS No.: 1029521-30-9 分子式: C15H11F2N3Os 分子量: 319.33
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

NVP CXCR2 20 是一种具有镇痛和抗伤害感受活性的选择性 CXCR2 抑制剂,可选择性阻断 CXCR2 信号通路,减轻大鼠慢性缩窄损伤 (CCI) 模型中的机械性和热痛觉过敏,抑制正常小鼠中 CXCL3 诱导的痛觉过敏,并降低 CCI 模型大鼠脊髓和背根神经节 (DRG) 中升高的 CXCL3 蛋白水平,可用于神经病理性疼痛和慢性阻塞性肺疾病 (COPD) 的研究。

生物实验数据

生物活性 NVP CXCR2 20 is a selective CXCR2 inhibitor with analgesic and antinociceptive activity that selectively blocks the CXCR2 signaling pathway, alleviates mechanical and thermal hyperalgesia in the rat chronic constriction injury (CCI) model, inhibits CXCL3-induced hyperalgesia in normal mice, and reduces elevated CXCL3 protein levels in the spinal cord and dorsal root ganglia (DRG) of CCI model rats, and can be used for research on neuropathic pain and chronic obstructive pulmonary disease (COPD).
IC50 & Target

CXCR2

4.9 μM (IC50)

体外研究
(In Vitro)

NVP CXCR2 20 (100 nM; 30 min pre-incubation, 24 h with LPS) 可降低原代大鼠小胶质细胞培养物和星形胶质细胞培养物中 LPS 诱导的 CXCL1、CXCL2 和 CXCL3 蛋白表达。
NVP CXCR2 20 (0.0005-10 μM) 可结合 CHO 细胞膜上的人重组 CXCR2,IC50 为 0.04 μM;其[35S]-GTPγS IC50 为 0.14 μM;该化合物的 cLogP 为 3.9,功能性配体亲脂性效率 (LLE) 为 3.0。
NVP CXCR2 20 (10 μM) 对 CXCR2 具有选择性,针对其他 49 种 GPCR 组成的筛选组无显著抑制活性 (IC50 > 10 μM)。

体内研究
(In Vivo)

NVP CXCR2 20 (10-30 μg/5 μL;鞘内给药;单次给药,或在 CCI 后 16 h 和 1 h 给药,之后每日 1 次连续 7 天) 可剂量依赖性地减轻 CCI 诱导的大鼠神经性疼痛中的机械性和热痛觉过敏;重复给予 10 μg/5 μL 剂量可在 CCI 后第 2 天和第 7 天减轻痛觉过敏,并使脊髓和 DRG 中的 CXCL3 蛋白水平恢复正常,且不影响胶质细胞活化。
NVP CXCR2 20 (10 μg/5 μL;鞘内注射;CCI 术后第 7 天单次给药,阿片类药物联合给药前 4 小时) 可在神经病理性疼痛大鼠中产生镇痛作用。
NVP CXCR2 20 (60 μg/5 μL;鞘内给药;单剂量,于鞘内给予 CXCL3 前 2 小时) 可预防 CXCL3 诱导的未致敏小鼠机械性及热痛觉过敏。

Animal Model: Wistar rats (male, adult, 250-300 g, chronic constriction injury of the sciatic nerve with intrathecal catheter implantation 7 days prior)
Dosage: 10 μg/5 μL (repeated administration); 20 μg/5 μL (single administration); 30 μg/5 μL (single administration)
Administration: intrathecal; single dose (single treatment); 16 h and 1 h post-CCI, then once daily for 7 days (repeated treatment)
Result: Produced significant analgesic effects on mechanical and thermal hypersensitivity at 2, 4, and 6 h after single administration (20 and 30 μg/5 μL).
Reduced mechanical hypersensitivity and thermal hypersensitivity after repeated dosing (10 μg/5 μL).
Normalized elevated CXCL3 protein in spinal cord and DRG to naive levels.
Did not affect CCI-induced spinal IBA1 (microglia) or GFAP (astroglia) upregulation.
Animal Model: Wistar rats (male, adult, 250-300 g, chronic constriction injury of the sciatic nerve with intrathecal catheter implantation 7 days prior)
Dosage: 10 μg/5 μL
Administration: intrathecal; single dose (day 7 post-CCI, 4 hours prior to opioid co-administration)
Result: Produced analgesic effects similar to single doses of morphine or buprenorphine in the von Frey and cold plate tests.
Animal Model: Albino Swiss mice (20-22 g)
Dosage: 60 μg/5 μL
Administration: intrathecal; single dose, 2 hours prior to intrathecal CXCL3
Result: Completely prevented the mechanical and thermal hypersensitivity induced by CXCL3 in naive mice at all tested time points (1.5, 5, and 24 hours post-CXCL3 administration).

化学信息

分子量 319.33
分子式 C15H11F2N3Os
CAS No. 1029521-30-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础