S 15931 是一种 5-HT1A 受体抑制剂,可抑制小家鼠福尔马林诱导的后爪舔舐晚期阶段反应及醋酸诱导的腹部扭体反应,消除褐家鼠 8-OH-DPAT 诱导的自发性甩尾反应,增强吗啡的镇痛作用,可用于疼痛相关研究。
产品编号: MS-F53641 CAS No.: 153607-45-5 分子式: C23H28N2O2 分子量: 364.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

S 15931 是一种 5-HT1A 受体抑制剂,可抑制小家鼠福尔马林诱导的后爪舔舐晚期阶段反应及醋酸诱导的腹部扭体反应,消除褐家鼠 8-OH-DPAT 诱导的自发性甩尾反应,增强吗啡的镇痛作用,可用于疼痛相关研究。

生物实验数据

生物活性 S 15931 is a 5-HT1A receptor inhibitor that inhibits the late-phase formalin-induced hind paw licking response and acetic acid-induced abdominal writhing response in Mus musculus, abolishes 8-OH-DPAT-induced spontaneous tail-flick response in Rattus norvegicus, enhances the analgesic effect of morphine, and can be used for pain-related research.
体内研究
(In Vivo)

S 15931 (40 mg/kg;皮下注射;单次给药;测试前 30 分钟) 对雄性 NMRI 小鼠福尔马林诱导舔舐反应的晚期阶段的抑制效力强于早期阶段。
S 15931 (40 mg/kg;皮下注射;单次给药;测试前 30 分钟) 可抑制雄性 NMRI 小鼠的醋酸诱导扭体反应。
S 15931 (40 mg/kg;皮下注射;单次给药;测试前 30 分钟) 可诱导雄性 NMRI 小鼠出现转棒共济失调。
S 15931 (40 mg/kg;皮下注射;单次给药;于 8-OH-DPAT 给药前 20 分钟给药) 可强效抑制雄性 Wistar 大鼠中由 8-OH-DPAT (MS-O45922) 诱导的自发性甩尾反应。
S 15931 (0-10.0 mg/kg;皮下注射;单次给药;测试前 60 分钟) 本身不会改变发声阈值,但在雄性 Wistar 大鼠的电刺激尾部发声试验中,可呈剂量依赖性增强吗啡的镇痛作用,当剂量≥0.63 mg/kg 时效果显著。

Animal Model: NMRI (male, 20-25 g, formalin-induced hindpaw licking model)
Dosage: 40.0 mg/kg
Administration: s.c.; single dose; 30 minutes pre-test
Result: Achieved an ID50 of 1.2 mg/kg for inhibition of the early phase of formalin-induced licking, producing a 95% maximum observed effect at 40.0 mg/kg.
Achieved an ID50 of 0.3 mg/kg for inhibition of the late phase of formalin-induced licking, producing a 99% maximum observed effect at 40.0 mg/kg.
Animal Model: NMRI (male, 20-25 g, acetic acid-induced abdominal writhing model)
Dosage: 40.0 mg/kg
Administration: s.c.; single dose; 30 minutes pre-test
Result: Achieved an ID50 of 10.4 mg/kg for inhibition of acetic acid-induced writhing, producing a 93% maximum observed effect at 40.0 mg/kg.
Animal Model: NMRI (male, 20-25 g, rotarod ataxia model)
Dosage: 40.0 mg/kg
Administration: s.c.; single dose; 30 minutes pre-test
Result: Achieved an ID50 of 21.3 mg/kg for induction of rotarod ataxia, producing a 90% maximum observed effect at 40.0 mg/kg.
Animal Model: Wistar (male, 200-250 g, 8-OH-DPAT-induced spontaneous tail-flicks model)
Dosage: 40.0 mg/kg
Administration: s.c.; single dose; 20 minutes pre-8-OH-DPAT
Result: Achieved an ID50 of 0.7 mg/kg for inhibition of 8-OH-DPAT-induced spontaneous tail-flicks, producing a 99% maximum observed effect at 40.0 mg/kg.
Animal Model: Wistar (male, 200-250 g, electrical tail stimulation vocalization model)
Dosage: 0.01, 0.04, 0.16, 0.83, 2.5, 10.0 mg/kg
Administration: s.c.; single dose; 60 minutes pre-test
Result: Did not significantly alter vocalization threshold relative to vehicle when administered alone.
Dose-dependently facilitated morphine's antinociceptive action, with significant potentiation observed at doses of 0.63 mg/kg, 2.5 mg/kg, and 10.0 mg/kg when co-administered with morphine.

化学信息

分子量 364.48
分子式 C23H28N2O2
CAS No. 153607-45-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础