Z-LLY-FMK

Synonyms: Calpain Inhibitor IV
Z-LLY-FMK (Calpain Inhibitor IV) 是一种参与多种细胞系统凋亡 (apoptosis) 的钙蛋白酶 (calpain) 抑制剂,可抑制胆总管结扎后的肠道凋亡 (apoptosis),减少小鼠感染粗大带绦虫囊尾蚴后的寄生虫负荷,并可用于囊尾蚴病研究。
产品编号: MS-F40564 纯度: 98.65% CAS No.: 133410-84-1 分子式: C30H40FN3O6 分子量: 557.65
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

Z-LLY-FMK (Calpain Inhibitor IV) 是一种参与多种细胞系统凋亡 (apoptosis) 的钙蛋白酶 (calpain) 抑制剂,可抑制胆总管结扎后的肠道凋亡 (apoptosis),减少小鼠感染粗大带绦虫囊尾蚴后的寄生虫负荷,并可用于囊尾蚴病研究。

生物实验数据

生物活性 Z-LLY-FMK (Calpain Inhibitor IV) is a calpain inhibitor involved in apoptosis across multiple cell systems that inhibits intestinal apoptosis (apoptosis) after common bile duct ligation, reduces parasite burden in mice infected with Taenia crassiceps cysticerci, and can be used for research on cysticercosis.
IC50 & Target

Calpain

体外研究
(In Vitro)

Z-LLY-FMK (10 μM,预处理 1 小时) 以时间和剂量依赖的方式抑制 Gal-9 诱导的 MOLT-4 细胞凋亡。

体内研究
(In Vivo)

Z-LLY-FMK (0.5 mg,通过下腔静脉在胆总管结扎后立即给药,然后第 1-2 天每天两次腹腔注射 0.5 mg,第 3 天上午腹腔注射 0.5 mg) 有效减少胆总管结扎大鼠中的肝细胞凋亡和胆管增生。
Z-LLY-FMK (2.2 μg,腹腔注射,每日一次,从感染前 2 天开始,持续至感染后 30 天) 在 BALB/c 小鼠中感染 10 个粗大带绦虫囊尾蚴后,实现寄生虫负荷减少 80%。

Animal Model: Male Sprague-Dawley rats (250-300 g) underwent common bile duct ligation (double-ligated with 50 silk and divided between ligatures) to establish a model of extrahepatic cholestasis.
Dosage: 0.5 mg
Administration: 0.5 mg via inferior vena cava immediately after common bile duct ligation, then 0.5 mg i.p. twice daily on days 1-2, and 0.5 mg i.p. on the morning of day 3
Result: Significantly diminished hepatocyte apoptosis in common bile duct-ligated rats.
Markedly reduced ductular proliferation in common bile duct-ligated rats.
Animal Model: Taenia crassiceps cysts (10 in 200 µL phosphate-buffered saline) were intraperitoneally challenged into BALB/c mice
Dosage: 2.2 μg
Administration: i.p., daily starting 2 days pre-infection and continuing for 30 days post-challenge
Result: Achieved an 80% reduction in parasite burden in BALB/c mice.
Showed no obvious toxicity.
Caused cysts to exhibit degenerative changes including tegumental erosion, shortened or sloughed microtriches, and breaks in the cyst surface.
Led to an intense but focal inflammatory reaction on cyst surfaces, with presence of fibroblasts, collagen, neutrophils, and macrophages.
性状 固体
颜色 White to off-white

化学信息

分子量 557.65
分子式 C30H40FN3O6
CAS No. 133410-84-1
别名 Calpain Inhibitor IV

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 125 mg/mL (224.15 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.7932 mL8.9662 mL17.9324 mL44.8310 mL
5 mM0.3586 mL1.7932 mL3.5865 mL8.9662 mL
10 mM0.1793 mL0.8966 mL1.7932 mL4.4831 mL
15 mM0.1195 mL0.5977 mL1.1955 mL2.9887 mL
20 mM0.0897 mL0.4483 mL0.8966 mL2.2415 mL
25 mM0.0717 mL0.3586 mL0.7173 mL1.7932 mL
30 mM0.0598 mL0.2989 mL0.5977 mL1.4944 mL
40 mM0.0448 mL0.2242 mL0.4483 mL1.1208 mL
50 mM0.0359 mL0.1793 mL0.3586 mL0.8966 mL
60 mM0.0299 mL0.1494 mL0.2989 mL0.7472 mL
80 mM0.0224 mL0.1121 mL0.2242 mL0.5604 mL
100 mM0.0179 mL0.0897 mL0.1793 mL0.4483 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础