Coibamide A 是一种 N-甲基稳定的细胞毒性缩酚肽,具有强大的抗增殖活性,可通过 mTOR 独立机制诱导自噬体积累并诱导细胞凋亡,同时抑制 VEGFA/VEGFR2 表达并抑制胶质母细胞瘤异种移植物中的肿瘤生长。
产品编号: MS-F38976 CAS No.: 1029227-48-2 分子式: C65H110N10O16 分子量: 1287.63
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Coibamide A 是一种 N-甲基稳定的细胞毒性缩酚肽,具有强大的抗增殖活性,可通过 mTOR 独立机制诱导自噬体积累并诱导细胞凋亡,同时抑制 VEGFA/VEGFR2 表达并抑制胶质母细胞瘤异种移植物中的肿瘤生长。

生物实验数据

生物活性 Coibamide A is an N-methyl-stabilized cytotoxic depsipeptide with potent antiproliferative activity that induces autophagosome accumulation via an mTOR-independent mechanism and apoptosis, while inhibiting VEGFA/VEGFR2 expression and suppressing tumor growth in glioblastoma xenografts.
IC50 & Target

VEGFR2

 

体外研究
(In Vitro)

Coibamide A (0.3-1 nM; 3-60 小时) 抑制 MDA-MB-231 乳腺癌细胞的增殖。
Coibamide A (2.3-230 nM; 3 天) 在人 U87-MG 和 SF-295 胶质母细胞瘤细胞中产生浓度和时间依赖性细胞毒性死亡。
Coibamide A (10-300 nM; 72 小时) 以细胞类型特异性的方式诱导 caspase-3/7 的激活和细胞凋亡。
Coibamide A (20 nM; 48 小时) 在抗凋亡的 U87-MG 细胞中诱导自噬体积累。

Cell Proliferation Assay

Cell Line: MDA-MB-231 breast cancer cells
Concentration: 0.3, 1 nM
Incubation Time: 3-60 hours
Result: Showed a steady concentration-dependent decrease in proliferative activity relative to vehicle-treated cells

Cell Cytotoxicity Assay

Cell Line: U87-MG and SF-295 cells
Concentration: 2.3 to 230 nM
Incubation Time: 3 days
Result: Induced concentration-dependent cytotoxicity with EC50 values of 28.8 nM and 96.2 nM for U87-MG and SF-295 cells, respectively.

Apoptosis Analysis

Cell Line: U87-MG and SF-295 cells
Concentration: 10-300 nM
Incubation Time: 72 h
Result: An 89 kDa band corresponding to the caspase 3-cleaved form of PARP1 was readily detected by 48 h indicative of apoptotic cell death in SF-295 cells, whereas only trace levels of this fragment were observed in late, detaching U87-MG cell lysates

Cell Autophagy Assay

Cell Line: U87-MG cell
Concentration: 20 nM
Incubation Time: 48 h
Result: Caused a clear increase in LC3-II expression by 1 h, and this increase in LC3-II expression was generally sustained through 48 h.
体内研究
(In Vivo)

Coibamide A (300 μg/kg; 瘤内注射; 前两天, 之后每 48 小时注射一次, 持续 35 天) 抑制胶质母细胞瘤皮下小鼠模型的肿瘤生长。

Animal Model: 8-week old female nude athymic mice with U87-MG cells
Dosage: 300 μg/kg
Administration: Intratumoral injections; for the first two days, and then every 48 h afterward for 35 days
Result: Remained stable at 200-300 mm3 without significant growth over 4 weeks of treatmen, whereas the tumors of vehicle-treated animals continued to grow at a steady rate consistent with this aggressive cancer cell type

化学信息

分子量 1287.63
分子式 C65H110N10O16
CAS No. 1029227-48-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础