Apilimod

Synonyms: 阿匹莫德; STA 5326; LAM-002A free base; AIT-101
Apilimod (STA 5326) 是一种有效且高度选择性的 PIKfyve 抑制剂,同时也是 IL-12/IL-23 的有效抑制剂,可抑制人和猴 PBMC 细胞中的 IL-12,IC50 值分别为 1 nM 和 2 nM。
产品编号: MS-F37890 纯度: 99.80% CAS No.: 541550-19-0 分子式: C23H26N6O2 分子量: 418.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价
1g
询价
询价
5g
询价
询价

产品描述

Apilimod (STA 5326) 是一种有效且高度选择性的 PIKfyve 抑制剂,同时也是 IL-12/IL-23 的有效抑制剂,可抑制人和猴 PBMC 细胞中的 IL-12,IC50 值分别为 1 nM 和 2 nM。

生物实验数据

生物活性 Apilimod (STA 5326) is a potent and highly selective PIKfyve inhibitor and a potent inhibitor of IL-12/IL-23 that inhibits IL-12 in human and monkey PBMC cells with IC50 values of 1 nM and 2 nM, respectively.
IC50 & Target PIKfyve:14 nM
体外研究
(In Vitro)

Apilimod inhibits IFN-γ production induced by either IFN-γ/SAC or SAC in human PBMCs, with an IC50 of approximately 20 nM. Apilimod show some inhibition against IFN-γ/SAC-induced TNF-α and ConA-induced IL-5 from human PBMCs at high concentrations, but no suppressive effect against IL-1β, IL-2, IL-4, IL-8, and IL-18 in all cultures tested. The p35 and p40 promoter-driven luciferase activities are significantly induced after stimulation with IFN-γ/LPS or IFN-γ/SAC, and are completely suppressed by 100 nM Apilimod.

体内研究
(In Vivo)

Apilimod (10 mg/kg, p.o.) is effective not only when administered throughout the entire experiment, but also when administration is initiated on day 30 when disease is clearly measurable but not maximal. TA-5326 causes a significant reduction in cell number only in the Th1 model, with an average percentage of inhibition of 51%±8% relative to the vehicle control. Apilimod treatment has no effect in the Th2 setting. Apilimod (5 or 20 mg/kg, p.o.) reduces the level of IL-12 p40 in serum without altering body weight in EAU mice. Oral administration of Apilimod reduces the severity of experimental autoimmune uveoretinitis (EAU) by clinical and histopathological analysis.

性状 固体
颜色 White to off-white

化学信息

分子量 418.49
分子式 C23H26N6O2
CAS No. 541550-19-0
别名 阿匹莫德; STA 5326; LAM-002A free base; AIT-101

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+ 5% Tween 80 + 45% Saline: 10 mg/mL (23.9 mM), Solution.
10% DMSO+90% Saline: < 10 mg/mL (23.9 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 5 mg/mL (11.95 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (238.95 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.3895 mL11.9477 mL23.8954 mL59.7386 mL
5 mM0.4779 mL2.3895 mL4.7791 mL11.9477 mL
10 mM0.2390 mL1.1948 mL2.3895 mL5.9739 mL
15 mM0.1593 mL0.7965 mL1.5930 mL3.9826 mL
20 mM0.1195 mL0.5974 mL1.1948 mL2.9869 mL
25 mM0.0956 mL0.4779 mL0.9558 mL2.3895 mL
30 mM0.0797 mL0.3983 mL0.7965 mL1.9913 mL
40 mM0.0597 mL0.2987 mL0.5974 mL1.4935 mL
50 mM0.0478 mL0.2390 mL0.4779 mL1.1948 mL
60 mM0.0398 mL0.1991 mL0.3983 mL0.9956 mL
80 mM0.0299 mL0.1493 mL0.2987 mL0.7467 mL
100 mM0.0239 mL0.1195 mL0.2390 mL0.5974 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础