Linoleic acid,suitable for cell culture

Synonyms: 亚油酸,suitable for cell culture
Linoleic acid 是多不饱和脂肪酸的关键组成成分,可降低 GSH-PX 和 T-SOD 的活性,并作为结构组分维持表皮透皮水屏障膜流动性的特定水平,还可对红细胞造成急性氧化损伤并最终导致部分急性贫血,因此可用于研究与亚油酸缺乏相关的皮肤病。
产品编号: MS-F11839 纯度: 99.08% CAS No.: 60-33-3 分子式: C18H32O2 分子量: 280.45
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
100mg
询价
3-5 天
250mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
3-5 天
5g
询价
询价
10g
询价
询价

产品描述

Linoleic acid 是多不饱和脂肪酸的关键组成成分,可降低 GSH-PX 和 T-SOD 的活性,并作为结构组分维持表皮透皮水屏障膜流动性的特定水平,还可对红细胞造成急性氧化损伤并最终导致部分急性贫血,因此可用于研究与亚油酸缺乏相关的皮肤病。

生物实验数据

生物活性 Linoleic acid is a key component of polyunsaturated fatty acids that reduces the activities of GSH-PX and T-SOD, serves as a structural component to maintain a specific level of epidermal transdermal water barrier membrane fluidity, and can cause acute oxidative damage to red blood cells, ultimately leading to partial acute anemia, and is therefore used in research on skin diseases associated with linoleic acid deficiency.
IC50 & Target HEK293 cells:4.8 μM (EC50), CHO-K1 cells:0.54 μM (EC50), RBL-2H3 cells:> 50 μM, CHO cells:1.8 μM (EC50)
体内研究
(In Vivo)

Linoleic acid (0.5 mL,15-90 mmol/L;静脉注射) 可在雄性 Sprague-Dawley 大鼠中诱导剂量依赖性的急性氧化性红细胞损伤;在注射后 24 h 时,60 mmol/L 剂量会导致 Hb (16.8 g/L) 和 RBC (0.71 ×1012/L) 出现最显著的降低,同时伴随抗氧化酶活性受抑制以及高铁血红素 Hb 生成增加。

Animal Model: Sprague-Dawley (male, 200±20 g)
Dosage: 0.5 mL, 15 mmol/L; 0.5 mL, 30 mmol/L; 0.5 mL, 60 mmol/L; 0.5 mL, 90 mmol/L
Administration: i.v.; single tail vein injection
Result: Reduced Hb by 13.5±2.0 g/L and RBC by 0.45±0.15×1012/L at 24 h post-injection (30 mmol/L dose).
Decreased GSH-PX, T-SOD, and H2O2 levels significantly compared to controls (P < 0.05) at 24 h and 48 h post-injection (30 mmol/L dose).
Induced red blood cell morphological changes (spindle shapes, pleomorphism, shrinkage, deformation, rupture), most distinct at 24 h post-injection (30 mmol/L dose).
Reduced Hb by 16.8±1.5 g/L and RBC by 0.71±0.18×1012/L at 24 h post-injection (60 mmol/L dose).
Decreased GSH-PX, T-SOD, and H2O2 levels significantly compared to controls (P < 0.05 at 24 h, P < 0.01 at 48 h) post-injection (60 mmol/L dose).
Detected a significant absorbance peak at 425 nm (ferryl Hb Soret peak) at 24 h post-injection, with peak intensity declining at 48 h and 72 h (60 mmol/L dose).
Caused 50% of rats to die within 5 minutes of injection, presenting with dyspnea, cyanosis, labial haemoptysis, and convulsions (90 mmol/L dose).
Reduced Hb and RBC levels at 24 h post-injection, with changes less severe than 30 mmol/L and 60 mmol/L doses (15 mmol/L dose).
性状 液体(密度:0.9022 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 280.45
分子式 C18H32O2
CAS No. 60-33-3
别名 亚油酸,suitable for cell culture

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 4.33 mg/mL (15.44 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Pure form -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 200 mg/mL (713.14 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.5657 mL17.8285 mL35.6570 mL89.1424 mL
5 mM0.7131 mL3.5657 mL7.1314 mL17.8285 mL
10 mM0.3566 mL1.7828 mL3.5657 mL8.9142 mL
15 mM0.2377 mL1.1886 mL2.3771 mL5.9428 mL
20 mM0.1783 mL0.8914 mL1.7828 mL4.4571 mL
25 mM0.1426 mL0.7131 mL1.4263 mL3.5657 mL
30 mM0.1189 mL0.5943 mL1.1886 mL2.9714 mL
40 mM0.0891 mL0.4457 mL0.8914 mL2.2286 mL
50 mM0.0713 mL0.3566 mL0.7131 mL1.7828 mL
60 mM0.0594 mL0.2971 mL0.5943 mL1.4857 mL
80 mM0.0446 mL0.2229 mL0.4457 mL1.1143 mL
100 mM0.0357 mL0.1783 mL0.3566 mL0.8914 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础