HDAC-IN-94 是一种强效、选择性的 HDAC6 抑制剂(IC50 = 4.5 nM),其对 HDAC6 的选择性是对 HDAC8 的 1000 倍以上,且对其他亚型(HDAC1-3/10)活性极弱,可通过诱导 α-微管蛋白(α-tubulin)超乙酰化、细胞凋亡(apoptosis)和 G2/M 期细胞周期阻滞而表现出强大的抗肿瘤功效和较低的细胞毒性,可用于神经母细胞瘤和胶质母细胞瘤的相关研究。
HDAC-IN-94
产品编号: MS-F03820 分子式: C18H18N2O5 分子量: 342.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HDAC-IN-94 是一种强效、选择性的 HDAC6 抑制剂(IC50 = 4.5 nM),其对 HDAC6 的选择性是对 HDAC8 的 1000 倍以上,且对其他亚型(HDAC1-3/10)活性极弱,可通过诱导 α-微管蛋白(α-tubulin)超乙酰化、细胞凋亡(apoptosis)和 G2/M 期细胞周期阻滞而表现出强大的抗肿瘤功效和较低的细胞毒性,可用于神经母细胞瘤和胶质母细胞瘤的相关研究。

生物实验数据

生物活性 HDAC-IN-94 is a potent and selective HDAC6 inhibitor (IC50 = 4.5 nM) that exhibits more than 1000-fold selectivity for HDAC6 over HDAC8 and very weak activity against other isoforms (HDAC1-3/10), and it induces α-tubulin hyperacetylation, apoptosis, and G2/M cell cycle arrest, demonstrating potent antitumor efficacy and low cytotoxicity, making it suitable for research on neuroblastoma and glioblastoma.
IC50 & Target

hHDAC6

4.5 nM (IC50)

hHDAC8

3273 nM (IC50)

hHDAC1

403 nM (IC50)

hHDAC10

202 nM (IC50)

hHDAC2

537 nM (IC50)

hHDAC3

1278 nM (IC50)

hHDAC5

4455 nM (IC50)

hHDAC11

>10000 nM (IC50)

体外研究
(In Vitro)

HDAC-IN-94 (compound 5o) 能够嵌入 hHDAC6 的催化位点,其中以中性形式模拟的羟肟酸基团能够螯合锌原子,其极性苯甲酰胺上的氢原子与 Ser568 形成氢键。
HDAC-IN-94 (1-10 μM,24 小时) 在 SH-SY5Y 细胞中以剂量依赖性的方式促进 α- 微管蛋白的乙酰化。
HDAC-IN-94 (10 nM-30 μM,24-72 小时) 在浓度高达 30 μM 时,对 HEK-293 细胞未显示出细胞毒性。
HDAC-IN-94 (24-72 小时) 对 U87-MG、T98G、U251-MG 和 SH-SY5Y 细胞表现出抗增殖活性,其 IC50 值分别为 51.31、42.60、2.37 和 3.32 μM。
HDAC-IN-94 (3 μM,24 小时) 在 SH-SY5Y 细胞中能促进 G2/M 期细胞周期阻滞、触发程序性细胞死亡,并引起轻微的自噬 (autophagy) 刺激。
HDAC-IN-94 (3-30 μM,24-72 小时) 在 SH-SY5Y 细胞中表现出明确的时间和浓度依赖性的促凋亡活性。

Western Blot Analysis

Cell Line: SH-SY5Y cells
Concentration: 1 and 10 μM
Incubation Time: 24 h
Result: Promoted acetylation of α-tubulin in a dose-dependent manner.

Cell Cycle Analysis

Cell Line: SH-SY5Y cells
Concentration: 3 μM
Incubation Time: 24 h
Result: Led to an accumulation of hypodiploid SH-SY5Y cells in the subG0/G1 phase.
Showed a decrease in the G0/G1 population and a slight increase in cells within the S-phase.

Apoptosis Analysis

Cell Line: SH-SY5Y cells
Concentration: 3, 10, and 30 μM
Incubation Time: 24, 48 and 72 h
Result: Induced a concentration-dependent increase in early apoptosis at 24 h.
Induced a significant increase of late apoptosis starting at 10 μM (24 h).
Showed significant effects on both early and late apoptosis at 10 μM and a pronounced apoptotic response at 30 μM (46 % for early and 27 % for late apoptosis), at 48 h of treatment.
Significantly increased early and late apoptosis at all concentrations at 72 h.
Induced a concentration-dependent increase in caspase-3/7 activation, starting from 10 μM at 24 h.
Elicited 24% caspase-positive cells at 30 μM at 24 h.
Showed a significant increase in caspase activation at 10 μM and 30 μM at 48 h.
Continued to activate caspase-3/7 in a concentration-dependent manner after 72 h, with 43% positivity at 30 μM.

化学信息

分子量 342.35
分子式 C18H18N2O5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础