(Rac)-ZLc-002 是一种 nNOS 与一氧化氮合酶 1 衔接蛋白 (NOS1AP) 相互作用的抑制剂,可抑制炎症性痛觉和化疗诱导的神经性疼痛,并与 Paclitaxel 协同降低肿瘤细胞活力。
(Rac)-ZLc-002
产品编号: MS-E61867 纯度: 98.96% 分子式: C10H17NO5 分子量: 231.25
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

(Rac)-ZLc-002 是一种 nNOS 与一氧化氮合酶 1 衔接蛋白 (NOS1AP) 相互作用的抑制剂,可抑制炎症性痛觉和化疗诱导的神经性疼痛,并与 Paclitaxel 协同降低肿瘤细胞活力。

生物实验数据

生物活性 (Rac)-ZLc-002 is an inhibitor of the interaction between nNOS and nitric oxide synthase 1 adaptor protein (NOS1AP) that suppresses inflammatory nociception and chemotherapy-induced neuropathic pain, and synergizes with Paclitaxel to reduce tumor cell viability.
IC50 & Target

nNOS/NOS1AP interaction

体外研究
(In Vitro)

(Rac)-ZLc-002 (10 μM) 可降低原代培养皮层神经元 NOS1AP 与 nNOS 免疫共沉淀。(Rac)-ZLc-002 在 AlphaScreen 体外结合实验中未能破坏 nNOS-NOS1AP 蛋白-蛋白相互作用。在无细胞检测中无活性。
(Rac)-ZLc-002 (10 μM) 可降低共表达全长 nNOS 的 HEK293T 细胞中全长 NOS1AP 的共免疫沉淀,但不能降低 PSD95-PDZ2 的共免疫沉淀。
(Rac)-ZLc-002 (0-50 μM; 72 h) 与 Paclitaxel (HY-B0015) 协同降低肿瘤细胞活力。

Cell Viability Assay

Cell Line: 4T1 cells
Concentration: 0-50 µM
Incubation Time: 72 h
Result: Treatment alone had no effect on the viability. Showed synergistic effect with Paclitaxel (HY-B0015).
体内研究
(In Vivo)

(Rac)-ZLc-002 (10 mg/kg; i.p.; once or daily for 8 days) 减轻 Paclitaxel (HY-B0015) 引起的机械性和冷性异位痛,抑制 Paclitaxel 诱导的小鼠模型神经性疼痛。
(Rac)-ZLc-002 (4 and 10 mg/kg; i.p.; once) 降低大鼠脊髓背角福尔马林诱发的痛觉行为和福尔马林样免疫反应性。
(Rac)-ZLc-002 (40 mg/kg/day; i.v.; 7 days) 减弱 ICR 小鼠慢性轻度应激 (CMS) 诱导的焦虑行为。
(Rac)-ZLc-002 (10 μM; 1 μl; 30 min after Corticosterone, MS-F46715) 海马体注射 7 天逆转糖皮质激素对小鼠的行为影响。

Animal Model: Adult C57BL/6J male mice, paclitaxel model of neuropathic pain
Dosage: 10 mg/kg
Administration: IP, once or daily for 8 days
Result: Increased postinjection mechanical paw withdrawal thresholds, mechanical paw withdrawal thresholds differed across postinjection times, and the interaction between drug treatment and injection time was significant. Elevated mechanical paw withdrawal thresholds relative to vehicle treatment from 30 min. Decreased postinjection cold responsiveness, cold responsiveness did not differ reliably across postinjection times, and the interaction between drug treatment and injection time was not significant. Once daily dosing increased mechanical paw withdrawal thresholds relative to the vehicle-treated group across the observation interval.
性状 固体
颜色 Off-white to light yellow

化学信息

分子量 231.25
分子式 C10H17NO5

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (432.43 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM4.3243 mL21.6216 mL43.2432 mL108.1081 mL
5 mM0.8649 mL4.3243 mL8.6486 mL21.6216 mL
10 mM0.4324 mL2.1622 mL4.3243 mL10.8108 mL
15 mM0.2883 mL1.4414 mL2.8829 mL7.2072 mL
20 mM0.2162 mL1.0811 mL2.1622 mL5.4054 mL
25 mM0.1730 mL0.8649 mL1.7297 mL4.3243 mL
30 mM0.1441 mL0.7207 mL1.4414 mL3.6036 mL
40 mM0.1081 mL0.5405 mL1.0811 mL2.7027 mL
50 mM0.0865 mL0.4324 mL0.8649 mL2.1622 mL
60 mM0.0721 mL0.3604 mL0.7207 mL1.8018 mL
80 mM0.0541 mL0.2703 mL0.5405 mL1.3514 mL
100 mM0.0432 mL0.2162 mL0.4324 mL1.0811 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础