4A-BFA-11 是一种叶酸靶向 PEG-MMAE 偶联物,对叶酸受体 α (FR-α) 具有特异性结合亲和力 (KD = 106.7 nM),通过结合聚乙二醇 (PEG) 介导的长循环 (EPR 效应) 与叶酸受体靶向作用实现肿瘤富集,并在肿瘤部位发生酶切以释放活性有效载荷,从而实现精准作用,在 HeLa 小鼠模型中能高效地携带、靶向并控制 MMAE 在肿瘤组织中的释放,可用于宫颈癌、卵巢癌和肺癌的研究。
4A-BFA-11
产品编号: MS-E31943 分子式: C113H173N23O31 分子量: 2349.72
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

4A-BFA-11 是一种叶酸靶向 PEG-MMAE 偶联物,对叶酸受体 α (FR-α) 具有特异性结合亲和力 (KD = 106.7 nM),通过结合聚乙二醇 (PEG) 介导的长循环 (EPR 效应) 与叶酸受体靶向作用实现肿瘤富集,并在肿瘤部位发生酶切以释放活性有效载荷,从而实现精准作用,在 HeLa 小鼠模型中能高效地携带、靶向并控制 MMAE 在肿瘤组织中的释放,可用于宫颈癌、卵巢癌和肺癌的研究。

生物实验数据

生物活性 4A-BFA-11 is a folate-targeted PEG-MMAE conjugate that exhibits specific binding affinity for folate receptor α (FR-α) with a KD of 106.7 nM; it achieves tumor enrichment through the combination of polyethylene glycol (PEG)-mediated long circulation (EPR effect) and folate receptor targeting, undergoes enzymatic cleavage at the tumor site to release the active payload for precise action, and efficiently delivers, targets, and controls the release of MMAE in tumor tissue in a HeLa mouse model, making it applicable for research on cervical cancer, ovarian cancer, and lung cancer.
IC50 & Target

FR-α

106.7 nM (Kd)

体外研究
(In Vitro)

4A-BFA-11 (72 小时) 在 HeLa、SK-OV-3 和 A549 细胞中表现出抗增殖活性,IC50 分别为 37.62、28.8 和 15.1 nM。

体内研究
(In Vivo)

4A-BFA-11 (0.4 和 0.8 mg/kg,静脉注射,每周一次,持续 2 周) 可抑制 HeLa 小鼠宫颈癌模型中的肿瘤生长。

Animal Model: BALB/c nude mice (5-6 weeks) inoculated with HeLa graft tumors in the right axilla
Dosage: 0.4 and 0.8 mg/kg
Administration: i.v., once weekly for 2 weeks
Result: Resulted in stronger antitumor effects with a tumor growth inhibition rate (T/C%) of 67.1% at 0.4 mg/kg.
Achieved pronounced antitumor effects with a T/C% of 95.9% at 0.8 mg/kg.
Showed no significant body weight loss and no significant changes in blood parameters.
Induced mild hepatitis at 0.4 mg/kg, characterized by trace inflammatory cell infiltration predominantly composed of lymphocytes and granulocytes.
Exhibited mild sinusoidal dilatation in the spleen, and the low-dose group showed slight adhesion of the white pulp.

化学信息

分子量 2349.72
分子式 C113H173N23O31

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础