PROTAC BCR-ABL Degrader-2

PROTAC BCR-ABL Degrader-2 是一种选择性 Bcr-AblT315 PROTAC 降解剂,在 Ba/F3 Bcr-AblT315I 细胞中的 DC50 为 108.7 nM,在 100 nM 和 300 nM 浓度下降解率分别达到 69.89% 和 94.23%,展现出强效降解能力,同时在体内表现出良好的血浆暴露量,能诱导显著的肿瘤消退和癌细胞凋亡 (apoptosis),且安全性良好,可用于慢性髓系白血病的研究(粉色:Bcr-Abl 配体 (MS-D00697);蓝色:Cereblon 配体 (MS-Q68284);黑色:连接子)。
产品编号: MS-E29621 CAS No.: 2703834-25-5 分子式: C48H46F3N9O6 分子量: 901.93
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC BCR-ABL Degrader-2 是一种选择性 Bcr-AblT315 PROTAC 降解剂,在 Ba/F3 Bcr-AblT315I 细胞中的 DC50 为 108.7 nM,在 100 nM 和 300 nM 浓度下降解率分别达到 69.89% 和 94.23%,展现出强效降解能力,同时在体内表现出良好的血浆暴露量,能诱导显著的肿瘤消退和癌细胞凋亡 (apoptosis),且安全性良好,可用于慢性髓系白血病的研究(粉色:Bcr-Abl 配体 (MS-D00697);蓝色:Cereblon 配体 (MS-Q68284);黑色:连接子)。

生物实验数据

生物活性 PROTAC BCR-ABL Degrader-2 is a selective Bcr-AblT315 PROTAC degrader with a DC50 of 108.7 nM in Ba/F3 Bcr-AblT315I cells, achieving degradation rates of 69.89% and 94.23% at 100 nM and 300 nM, respectively, demonstrating potent degradation capability, while exhibiting favorable plasma exposure in vivo, inducing significant tumor regression and cancer cell apoptosis (apoptosis) with a good safety profile, and is applicable for research on chronic myeloid leukemia (pink: Bcr-Abl ligand (MS-D00697); blue: Cereblon ligand (MS-Q68284); black: linker).
体外研究
(In Vitro)

PROTAC BCR-ABL Degrader-2 (Compound 7o) 针对 K562 及 Ba/F3 Bcr-AblWT 细胞的IC50 分别为 7.7 nM 与 4.2 nM。
PROTAC BCR-ABL Degrader-2 (0-300 nM) 在 Ba/F3 Bcr-AblT315I 细胞中可显著降低 Bcr-AblT315I 蛋白水平,DC50 为108.7 nM。
PROTAC BCR-ABL Degrader-2 (0-300 nM,0-48 小时) 在 Bcr-AbllT315I 细胞中通过 CRBN E3泛素化途径诱导 Bcr-AblT315I 蛋白降解,并呈现"钩状效应"。

Western Blot Analysis

Cell Line: Ba/F3 Bcr-AblT315I and K562 cells
Concentration: 100 nM
Incubation Time: 0, 1, 2, 4, 6, 8, 10, 12, 24, 36 and 48 h
Result: Caused the degradation of Bcr-AblT315I protein in a time-dependent manner.
Reduced Bcr-AblT315I protein level substantially after 6h treatment while appeared a “hook” effect during 8-10h treatment.
Observed the maximum degradation after24h treatment.
Displayed a different trend for reducing Bcr-AblWT in K562cells with substantially reduction after 36h treatment (this different might be associated with the different states of E3 ligase in Ba/F3Bcr-AblT315I and K562 cells.).

Immunofluorescence

Cell Line: MG132 (MS-L06849) (20 ) Ba/F3 Bcr-AblT315I cells
Concentration: 100 and 300 nM
Incubation Time: 24 h
Result: Induced Bcr-AblT315I degradation rescuing by MG132.
体内研究
(In Vivo)

PROTAC BCR-ABL Degrader-2 (compound 7o) (20 mg/kg,单次腹腔注射) 在 ICR 小鼠中血浆浓度在 48 小时内维持较高水平。
PROTAC BCR-ABL Degrader-2 (10-20 mg/kg,腹腔注射,每两日一次、持续 14 天) 在 Ba/F3 Bcr-AblT315I 异种移植瘤小鼠模型中,展现出显著的抗肿瘤活性与良好的安全性。

Animal Model: Ba/F3 cells expressing Bcr-AblT315I (2 x 106 cells/0.1 mL) induced-CB17-SCID mice
Dosage: 10 or 20 mg/kg
Administration: i.p., once every two days for 14 days
Result: Obviously sup pressed the growth of Ba/F3 Bcr-AblT315I xenograft tumor with a tumor growth inhibition (TGI) value of 90.8% at the dose of 20 mg/kg.
Induced the Bcr-AblT315I degradation and apoptosis.
Resulted no mortality or significant body weight loss.

化学信息

分子量 901.93
分子式 C48H46F3N9O6
CAS No. 2703834-25-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础