Acetic acid lead

Synonyms: 四乙酸铅
Acetic acid lead 是一种羧酸和短链脂肪酸 (SCFA),能激活 AMPK、增加 ROS、cleaved caspase 9 和 PPARα,并下调 SREBP-1c 和 ChREBP 的表达,对酿酒酵母 W303-1A 具有抗真菌活性,可调节能量代谢,对胃癌具有抗癌活性,可诱发扭体反应和溃疡性结肠炎,因此可用于胃癌、溃疡性结肠炎、肝脂肪变性和疼痛的研究。
产品编号: MS-E28309 CAS No.: 546-67-8 分子式: C2H4O2.1/4Pb 分子量: 447.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5g
询价
3-5 天
10g
询价
3-5 天
50g
询价
询价

产品描述

Acetic acid lead 是一种羧酸和短链脂肪酸 (SCFA),能激活 AMPK、增加 ROS、cleaved caspase 9 和 PPARα,并下调 SREBP-1c 和 ChREBP 的表达,对酿酒酵母 W303-1A 具有抗真菌活性,可调节能量代谢,对胃癌具有抗癌活性,可诱发扭体反应和溃疡性结肠炎,因此可用于胃癌、溃疡性结肠炎、肝脂肪变性和疼痛的研究。

生物实验数据

生物活性 Acetic acid lead is a carboxylic acid and short-chain fatty acid (SCFA) that activates AMPK, increases ROS, cleaved caspase 9, and PPARα, downregulates the expression of SREBP-1c and ChREBP, exhibits antifungal activity against Saccharomyces cerevisiae W303-1A, regulates energy metabolism, shows anticancer activity against gastric cancer, and induces writhing response and ulcerative colitis, and can therefore be used for research on gastric cancer, ulcerative colitis, hepatic steatosis, and pain.
体外研究
(In Vitro)

Acetic acid lead (Acetic acid;2-5 µM;24 h) 通过氧化应激诱导胃癌细胞 (RGK1) 选择性死亡,而对正常胃粘膜细胞 (RGM1) 影响较小。
Acetic acid lead (Acetic acid;20-200 mM;200 min) 诱导酿酒酵母 W303-1A 程序性细胞死亡。
Acetic acid lead (Acetic acid;5 mM;15 天) 抑制 Caco-2 细胞中双糖酶 (蔗糖酶、麦芽糖酶、海藻糖酶、乳糖酶) 活性的升高,但不影响细胞生长或葡萄糖转运。
Acetic acid lead (Acetic acid;1.8-7.2 mM;3 h) 通过消耗 ATP 来激活 AMPKα 信号通路,从而增加牛肝细胞中的 AMP/ATP 比率,上调脂质氧化基因,下调脂肪生成基因,降低细胞内甘油三酯含量。

Western Blot Analysis

Cell Line: Rat gastric mucosal cells (RGM1), cancerous gastric mucosal cells (RGK1)
Concentration: 0, 1, 2, 5, 10, 20 µM
Incubation Time: 24 h
Result: Increased monocarboxylic transporter 1 (MCT1) and cleaved caspase 9 in RGK1 cells.
Showed minor effects in RGM1 cells.
体内研究
(In Vivo)

Acetic acid lead (0.10-0.56%; 腹腔注射;单次给药) 可对雄性 C57BL/6J 小鼠产生浓度依赖性的摄食行为抑制作用,并引发强烈的扭体反应;其中 0.56%剂量的抑制摄食作用最强,持续时间可达 60 分钟。
Acetic acid lead (5% v/v; i.r.; single dose) 可诱导雄性昆明小鼠发生严重溃疡性结肠炎,表现为高死亡率、疾病活动指数升高、结肠组织损伤、中性粒细胞浸润增加,以及促炎细胞因子和 NF-κB p65 表达上调。

Animal Model: C57BL/6J (male, 20-33g)
Dosage: 0.10%; 0.18%; 0.32%; 0.56%
Administration: i.p.; single dose
Result: Reduced Ensure consumption to 0.09 g/g body weight at 0.32% dose, significantly lower than control 0.14 g/g body weight.
Reduced Ensure consumption to 0.03 g/g body weight at 0.56% dose, significantly lower than control 0.14 g/g body weight.
Induced a mean of approximately 32 writhes over 20 minutes at 0.56% dose.
Produced significant feeding-suppressant effects at 0 and 60 minutes post-administration with 0.56% dose, which were no longer apparent by 240 minutes post-administration.
Animal Model: Kunming mice (male, 20-25 g)
Dosage: 5% v/v
Administration: i.r.; single dose
Result: Caused severe colitis with bloody diarrhea, poor coat quality, dramatic body weight loss, reduced mobility, and gross blood adhesion to the anus.
Resulted in a high mortality rate.
Led to 78.44% colon area affected.
Caused wet colon weight/length of 162.8 mg/cm.
Resulted in a macroscopic score of ~3.8.
Induced a histological score of ~3.9.
Increased colonic MPO activity to ~2.4 U/g tissue.
Elevated serum and colonic TNF-α and IL-6.
Distinctly elevated p65 NF-κB protein expression compared to normal controls.

化学信息

分子量 447.43
分子式 C2H4O2.1/4Pb
CAS No. 546-67-8
别名 四乙酸铅

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础