Lenalidomide hydrochloride

Synonyms: 来那度胺盐酸盐; CC-5013 hydrochloride
Lenalidomide hydrochloride (CC-5013 hydrochloride) 是 Thalidomide 的衍生物,也是一种具有口服活性的免疫调节剂,以分子胶的方式发挥作用;它是泛素 E3 连接酶 cereblon (CRBN) 的配体,通过 CRBN-CRL4 泛素连接酶选择性泛素化并降解两种淋巴转录因子 IKZF1 和 IKZF3,特别抑制成熟 B 细胞淋巴瘤(包括多发性骨髓瘤)的生长,并诱导 T 细胞释放白细胞介素-2 (IL-2)。
产品编号: MS-D79543 CAS No.: 1243329-97-6 分子式: C13H14ClN3O3 分子量: 295.72
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Lenalidomide hydrochloride (CC-5013 hydrochloride) 是 Thalidomide 的衍生物,也是一种具有口服活性的免疫调节剂,以分子胶的方式发挥作用;它是泛素 E3 连接酶 cereblon (CRBN) 的配体,通过 CRBN-CRL4 泛素连接酶选择性泛素化并降解两种淋巴转录因子 IKZF1 和 IKZF3,特别抑制成熟 B 细胞淋巴瘤(包括多发性骨髓瘤)的生长,并诱导 T 细胞释放白细胞介素-2 (IL-2)。

生物实验数据

生物活性 Lenalidomide hydrochloride (CC-5013 hydrochloride) is a derivative of Thalidomide and an orally active immunomodulatory agent that acts as a molecular glue; it is a ligand of the ubiquitin E3 ligase cereblon (CRBN) that selectively ubiquitinates and degrades the two lymphoid transcription factors IKZF1 and IKZF3 through the CRBN-CRL4 ubiquitin ligase, specifically inhibits the growth of mature B-cell lymphomas (including multiple myeloma), and induces the release of interleukin-2 (IL-2) from T cells.
IC50 & Target

Cereblon

 

体外研究
(In Vitro)

Lenalidomide is potent in stimulating T cell proliferation and IFN-γ and IL-2 production. Lenalidomide has been shown to inhibit production of pro inflammatory cytokines TNF-α, IL-1, IL-6, IL-12 and elevate the production of anti-inflammatory cytokine IL-10 from human PBMCs. Lenalidomide downregulates the production of IL-6 directly and also by inhibiting multiple myeloma (MM) cells and bone marrow stromal cells (BMSC) interaction, which augments the apoptosis of myeloma cells. Dose-dependent interaction with the CRBN-DDB1 complex is observed with Thalidomide, Lenalidomide and Pomalidomide, with IC50 values of ~30 μM, ~3 μM and ~3 μM, respectively, These reduced CRBN expression cells (U266-CRBN60 and U266-CRBN75) are less responsive than the parental cells to antiproliferative effects Lenalidomide across a dose-response range of 0.01 to 10 μM. Lenalidomide, a thalidomide analog, functions as a molecular glue between the human E3 ubiquitin ligase cereblon and CKIα is shown to induce the ubiquitination and degradation of this kinase, thus presumably killing leukemic cells by p53 activation.

体内研究
(In Vivo)

The toxicity of Lenalidomide doses up to 15, 22.5, and 45 mg/kg via IV, IP, and PO routes of administration. Limited by solubility in our PBS dosing vehicle, these maximum achievable Lenalidomide doses are well tolerated with the exception of one mouse death (of four total dosed) at the 15 mg/kg IV dose. Notably, no other toxicities are observed in the study at IV doses of 15 mg/kg (n=3) or 10 mg/kg (n=45) or at any other dose level through IV, IP, and PO routes.

化学信息

分子量 295.72
分子式 C13H14ClN3O3
CAS No. 1243329-97-6
别名 来那度胺盐酸盐; CC-5013 hydrochloride

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础