Etoposide phosphate disodium

Synonyms: BMY-40481 disodium
Etoposide phosphate disodium (BMY-40481 disodium) 是一种有效的抗癌化疗试剂和选择性拓扑异构酶 II 抑制剂,可防止 DNA 链的重新连接,它是依托泊苷的磷酸酯前体,被认为与 Etoposide 活性相当,可诱导细胞周期阻滞、凋亡和自噬。
产品编号: MS-D71879 CAS No.: 122405-33-8 分子式: C29H31Na2O16P 分子量: 712.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Etoposide phosphate disodium (BMY-40481 disodium) 是一种有效的抗癌化疗试剂和选择性拓扑异构酶 II 抑制剂,可防止 DNA 链的重新连接,它是依托泊苷的磷酸酯前体,被认为与 Etoposide 活性相当,可诱导细胞周期阻滞、凋亡和自噬。

生物实验数据

生物活性 Etoposide phosphate disodium (BMY-40481 disodium) is a potent anti-cancer chemotherapeutic agent and a selective topoisomerase II inhibitor that prevents DNA strand religation; as the phosphate ester prodrug of etoposide, it is considered to have activity comparable to that of etoposide and induces cell cycle arrest, apoptosis, and autophagy.
IC50 & Target

Topoisomerase II

 

体外研究
(In Vitro)

Etoposide phosphate disodium is a water-soluble derivative and probable prodrug of etoposide characterized by the presence of a phosphate group in position 4' of the E ring of the etoposide molecule.
Etoposide phosphate disodium (0-1 μM; 72 hours) inhibits HCT116 FBXW+/+, FBXW-/- and p53-/- as a dose-dependent manner, exhibits IC50 values of 0.945 μM; 0.375 μM; and 1.437 μM, respectively.
Etoposide phosphate disodium (25 μM; 6 hours) delays p53 recover in FBXW7-deficient cells. In addition, FBXW7 expression is disappeared in FBXW7-/- cells.

Cell Viability Assay

Cell Line: FBXW+/+, FBXW-/- and p53-/- cell
Concentration: 0.025 μM, 0.05 μM, 0.075 μM, 0.1 μM, 0.2 μM, 0.4 μM, 0.6 μM, 0.8 μM, 1 μM
Incubation Time: 72 hours
Result: Inhibited HCT116 FBXW+/+, FBXW-/- and p53-/- cell growth as a concentration manner.

Western Blot Analysis

Cell Line: HCT116 FBXW7+/+ or FBXW7-/- cells
Concentration: 25 μM
Incubation Time: 6 hours
Result: Exhibited that the recovery of p53 levels after DNA damage is mediated by FBXW7.
体内研究
(In Vivo)

Etoposide phosphate (intravenous injection; 50, 100, or 150 mg/kg; single dose) has clinical symptomology of progressive ataxia, impaired righting reflex, and splaying and paresis of fore- and hindlimbs at day 8 in female CD-1 mice.

Animal Model: Female CD-1 mice
Dosage: 50, 100, or 150 mg/kg
Administration: Intravenous injection; single dose
Result: Observed degeneration of dorsal root ganglion cells and axonal degeneration of their distal and proximal processes in peripheral nerves, dorsal spinal roots, and dorsal funiculi of the spinal cord at all doses under light microscopy (LM).

化学信息

分子量 712.50
分子式 C29H31Na2O16P
CAS No. 122405-33-8
别名 BMY-40481 disodium

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础