L-744832 是一种法尼基转移酶 (Farnesyl Transferase) 抑制剂,能有效抑制 H-Ras 和 N-Ras 的法尼基化,但对 K-Ras 的处理影响较小,其不仅通过抑制 Ras 法尼基化直接靶向致癌通路,更通过表观遗传重编程恢复 TGF-β 信号从而增强放疗敏感性,并可诱导细胞周期阻滞与细胞凋亡 (apoptosis),可用于胰腺癌等 Ras 驱动型肿瘤的研究。
产品编号: MS-D65095 CAS No.: 160141-09-3 分子式: C26H45N3O6S2 分子量: 559.78
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

L-744832 是一种法尼基转移酶 (Farnesyl Transferase) 抑制剂,能有效抑制 H-Ras 和 N-Ras 的法尼基化,但对 K-Ras 的处理影响较小,其不仅通过抑制 Ras 法尼基化直接靶向致癌通路,更通过表观遗传重编程恢复 TGF-β 信号从而增强放疗敏感性,并可诱导细胞周期阻滞与细胞凋亡 (apoptosis),可用于胰腺癌等 Ras 驱动型肿瘤的研究。

生物实验数据

生物活性 L-744832 is a farnesyl transferase inhibitor that effectively inhibits the farnesylation of H-Ras and N-Ras but has little effect on K-Ras processing, and it not only directly targets oncogenic pathways by inhibiting Ras farnesylation but also restores TGF-β signaling through epigenetic reprogramming to enhance radiosensitivity, induces cell cycle arrest and apoptosis, and can be used for research on Ras-driven tumors such as pancreatic cancer.
IC50 & Target

H-Ras

 

NRAS rG4

 

体外研究
(In Vitro)

L-744832 (0.1-50 μM, 24-72 h) 在 Panc-1、Capan-2、BxPC-3、AsPC-1 和 CFPAC-1 细胞中表现出显著不同的敏感性,IC50 值分别为 1.3、2.1、12.3、14.3 和 > 50 μM。
L-744832 (0.1-50 μM, 72 h) 可使敏感细胞系 (Panc-1、Capan-2、BxPC-3 和 AsPC-1) 阻滞于细胞周期的 G2/M 期,且阻滞发生在 G2/M 检查点下游的有丝分裂起始阶段。
L-744832 (10 μM, 24-72 h) 可诱导上述五种细胞凋亡,且放疗联合治疗可显著提高 MIA PaCa-2 细胞的凋亡率,而 BxPC-3 细胞则未观察到此效应。
L-744832 (0.1-10 μM) 与电离辐射联用可增强人胰腺癌细胞的细胞毒性。
L-744832 (5-10 μM) 可有效抑制 H-Ras 和 N-Ras 的法尼基化,且 MIA PaCa-2 细胞比 BxPC-3 细胞更敏感。
L-744832 (5-10 μM,3-6 h) 可通过调节 DNMT1 恢复 TGF-β II 型受体 (RII) 的表达,从而重建 TGF-β 的抑癌功能。

Cell Cycle Analysis

Cell Line: Panc-1, Capan-2, BxPC-3, AsPC-1 and CFPAC-1 cells
Concentration: 0.1, 0.5, 1, 10, 25 and 50 μM
Incubation Time: 72 h
Result: Dose-dependent increased in G2/M phase accumulation and the proportion of G2/M phase cells in Panc-1 cells increased nearly threefold.

Apoptosis Analysis

Cell Line: Panc-1, Capan-2, BxPC-3, AsPC-1 and CFPAC-1 cells
Concentration: 10 μM
Incubation Time: 72 h
Result: Showed chromatin condensation and nuclear fragmentation.
Increased the apoptotic index in each group, and this occurred in both wild-type p53 (Capan-2) cells and mutant p53 (Panc-1) cells.

Western Blot Analysis

Cell Line: Panc-1, Capan-2, BxPC-3, AsPC-1 and CFPAC-1 cells
Concentration: 10 μM
Incubation Time: 72 h
Result: Significantly increased the activity of Cyclin B1/Cdc2 kinase.

RT-PCR

Cell Line: MIA PaCa-2 cells
Concentration: 10 μM
Incubation Time: 3 and 6 h
Result: Activated the RII promoter to increase its mRNA levels.
Reduced the mRNA levels of DNMT1.

Western Blot Analysis

Cell Line: MIA PaCa-2 cells
Concentration: 10 μM
Incubation Time: 3 and 6 h
Result: Activated the RII promoter to increase its protein levels.
Reduced the protein levels of DNMT1.

化学信息

分子量 559.78
分子式 C26H45N3O6S2
CAS No. 160141-09-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础