A-357300 是一种可逆且选择性的 MetAP2 抑制剂,对 MetAP2 和 MetAP1 的 IC50 值分别为 0.12 μM 和 57 μM,可选择性使内皮细胞和部分肿瘤细胞的细胞周期阻滞于 G1 期从而诱导细胞增殖,在体外和体内均能抑制血管生成,并在癌、肉瘤和神经母细胞瘤小鼠模型中显示出强大的抗肿瘤活性,可用于神经母细胞瘤、纤维肉瘤和乳腺癌的研究。
产品编号: MS-D53662 CAS No.: 369358-07-6 分子式: C15H22ClN3O3S 分子量: 359.87
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

A-357300 是一种可逆且选择性的 MetAP2 抑制剂,对 MetAP2 和 MetAP1 的 IC50 值分别为 0.12 μM 和 57 μM,可选择性使内皮细胞和部分肿瘤细胞的细胞周期阻滞于 G1 期从而诱导细胞增殖,在体外和体内均能抑制血管生成,并在癌、肉瘤和神经母细胞瘤小鼠模型中显示出强大的抗肿瘤活性,可用于神经母细胞瘤、纤维肉瘤和乳腺癌的研究。

生物实验数据

生物活性 A-357300 is a reversible and selective MetAP2 inhibitor with IC50 values of 0.12 μM for MetAP2 and 57 μM for MetAP1 that selectively induces cell cycle arrest at G1 phase in endothelial cells and certain tumor cells to promote cell proliferation, inhibits angiogenesis both in vitro and in vivo, exhibits potent antitumor activity in mouse models of carcinoma, sarcoma, and neuroblastoma, and can be used for research on neuroblastoma, fibrosarcoma, and breast cancer.
体外研究
(In Vitro)

A-357300 (0.1 nM-100 μM, 3 d) 对内皮细胞和肿瘤细胞表现出选择性抗增殖活性,IC50 为 0.1-2 μM,但对人原代细胞几乎无此活性。
A-357300 (10 μM, 3 d) 可诱导 HMVEC 或 HT-1080 细胞发生 G1 期细胞周期阻滞,从而导致细胞增殖停滞。
A-357300 (0-10 μM, 1 d) 可降低 HMVEC 细胞中细胞周期蛋白 A 的浓度,同时保持细胞周期蛋白 D1 的浓度不变。
A-357300 (0.08-2 μM, 3 d) 在 HMVEC 细胞中 0.4 μM 浓度下完全阻断管腔形成。

Cell Cycle Analysis

Cell Line: HMVECs and HT-1080 cells
Concentration: 10 μM
Incubation Time: 3 days
Result: Showed G1 phase arrest, with no accumulation of sub-G1 phase cells.

Western Blot Analysis

Cell Line: HMVECs
Concentration: 0, 0.001, 0.01, 0.1, 1 and 10 μM
Incubation Time: 24 h
Result: Reduced the concentration of cyclin A, while keeping the concentration of cyclin D1 unchanged.
体内研究
(In Vivo)

A-357300 (25-100 mg/kg,皮下注射,每日两次,持续 7 天) 可抑制小鼠角膜血管生成。
A-357300 (8-100 mg/kg,皮下注射,隔日一次或每日两次,持续 14-24 天) 可抑制小鼠神经母细胞瘤、纤维肉瘤和乳腺癌的生长。

Animal Model: Corneal angiogenesis model established in CF1 mice
Dosage: 25, 75 and 100 mg/kg
Administration: Subcutaneous injection (s.c.), twice daily for 7 days
Result: Inhibited growth factor-induced cornea neovascularization in a dose-dependent manner against VEGF, and against bFGF.
Animal Model: CHP-134 neuroblastoma xenograft model established in mice
Dosage: 100 mg/kg
Administration: Subcutaneous injection (s.c.), twice daily for 24 days
Result: Significantly suppressed growth of this established tumor xenograft with a T/C of 0.185 on day 24 after the initiation of treatment.
Animal Model: HT-1080 fibrosarcoma xenograft model established in SCID-beige mice
Dosage: 15, 30, 60 and 100 mg/kg
Administration: Subcutaneous injection (s.c.), twice daily for 14-16 days
Result: Inhibited tumor growth in a dose-dependent manner and no overt signs of toxicity were observed.
Animal Model: MDA-435-LM breast cancer xenograft model established in SCID mice
Dosage: 8, 16, 20 mg/kg (group 1); 50 and 100 mg/kg (group 2)
Administration: Subcutaneous injection (s.c.), once every other day (group 1) or twice daily (group 2) for 20 days
Result: Exhibited better efficacy in group 2 than group 1.

化学信息

分子量 359.87
分子式 C15H22ClN3O3S
CAS No. 369358-07-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础