ULK1-IN-2(化合物 3s)是一种有效的 ULK1 抑制剂,对癌细胞具有最强的细胞毒性,在 A549 细胞中的 IC50 值为 1.94 μM,可诱导细胞凋亡并同时阻断自噬,因此可用于非小细胞肺癌的研究。
产品编号: MS-D43834 纯度: 98.34% CAS No.: 2497409-01-3 分子式: C19H16BrFN4O6 分子量: 495.26
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

ULK1-IN-2(化合物 3s)是一种有效的 ULK1 抑制剂,对癌细胞具有最强的细胞毒性,在 A549 细胞中的 IC50 值为 1.94 μM,可诱导细胞凋亡并同时阻断自噬,因此可用于非小细胞肺癌的研究。

生物实验数据

生物活性 ULK1-IN-2 (compound 3s) is a potent ULK1 inhibitor that exhibits the highest cytotoxicity against cancer cells with an IC50 value of 1.94 μM in A549 cells, induces apoptosis while blocking autophagy, and can therefore be used for the study of non-small cell lung cancer.
IC50 & Target

ULK1

 

体外研究
(In Vitro)

ULK1-IN-2 (compound 3s) (10 μM, 24 h) shows strong anti-proliferative activity against A549, U937, HL60, MDA-MB-468 and MCF-7.
ULK1-IN-2 (0-8 μM, 24 h) blocks autophagy via inhibiting ULK1 in A549 cells.
ULK1-IN-2 (0-8 μM, 24 h) induces apoptosis via the mitochondrial pathways in A549 cells in dose department manner.
ULK1-IN-2 (0-8 μM, 24 h) inhibits ULK1 and p-ULK1ser317 expression in a concentration-dependent manner, remarkably decreases Bcl-2 expression, increases Bax and the active form of Caspase-3 expression..

Cell Proliferation Assay

Cell Line: Human cancer cell lines A549, U937, HL60, MDA-MB-468 and MCF-7
Concentration: 10 μM
Incubation Time: 24 h
Result: Significantly improved anti-proliferative activity against A549, U937, HL60, MDA-MB-468 and MCF-7, with kinase inhibitory activity of 99.15% and IC50 values of 1.94, 12.92, 10.89, 16.83, and 19.60 μM, respectively.

Cell Autophagy Assay

Cell Line: A549 cells
Concentration: 0, 2, 4, 8 μM
Incubation Time: 24 h
Result: Blocked autophagy of A549 cells via inhibiting ULK.

Western Blot Analysis

Cell Line: A549 cells
Concentration: 0, 2, 4, 8 μM
Incubation Time: 24 h
Result: Inhibited expression of ULK1 and p-ULK1ser317 in a concentration-dependent manner. Increased the autophagy substrate P62, reduced LC3-I conversion to LC3-II, and decreased the levels of Beclin1. Remarkably decreased Bcl-2 expression, increased Bax and the active form of Caspase-3 expression.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 495.26
分子式 C19H16BrFN4O6
CAS No. 2497409-01-3

储存&溶解度

储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 33.33 mg/mL (67.30 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0191 mL10.0957 mL20.1914 mL50.4785 mL
5 mM0.4038 mL2.0191 mL4.0383 mL10.0957 mL
10 mM0.2019 mL1.0096 mL2.0191 mL5.0479 mL
15 mM0.1346 mL0.6730 mL1.3461 mL3.3652 mL
20 mM0.1010 mL0.5048 mL1.0096 mL2.5239 mL
25 mM0.0808 mL0.4038 mL0.8077 mL2.0191 mL
30 mM0.0673 mL0.3365 mL0.6730 mL1.6826 mL
40 mM0.0505 mL0.2524 mL0.5048 mL1.2620 mL
50 mM0.0404 mL0.2019 mL0.4038 mL1.0096 mL
60 mM0.0337 mL0.1683 mL0.3365 mL0.8413 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础