Diclofenac acyl glucuronide

Synonyms: D-1-O-G
Diclofenac acyl glucuronide (D-1-O-G) 是一种具有口服活性的 Diclofenac (MS-U62954) 葡萄糖醛酸代谢产物,具备 SOD 抑制活性、COX-1 抑制活性 (IC50 = 0.620 μM) 和 COX-2 抑制活性 (IC50 = 2.91 μM),可诱导活性氧 (ROS) 生成并作为 OATP2B1 的底物,诱导小肠溃疡,可用于肠道病和小肠溃疡的相关研究。
产品编号: MS-D27982 纯度: 98.34% CAS No.: 64118-81-6 分子式: C20H19Cl2NO8 分子量: 472.27
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
500μg
询价
3-5 天

产品描述

Diclofenac acyl glucuronide (D-1-O-G) 是一种具有口服活性的 Diclofenac (MS-U62954) 葡萄糖醛酸代谢产物,具备 SOD 抑制活性、COX-1 抑制活性 (IC50 = 0.620 μM) 和 COX-2 抑制活性 (IC50 = 2.91 μM),可诱导活性氧 (ROS) 生成并作为 OATP2B1 的底物,诱导小肠溃疡,可用于肠道病和小肠溃疡的相关研究。

生物实验数据

生物活性 Diclofenac acyl glucuronide (D-1-O-G) is an orally active glucuronide metabolite of Diclofenac (MS-U62954) that exhibits SOD inhibitory activity, COX-1 inhibitory activity (IC50 = 0.620 μM), and COX-2 inhibitory activity (IC50 = 2.91 μM), induces reactive oxygen species (ROS) generation, acts as a substrate of OATP2B1, induces small intestinal ulceration, and can be used in research related to intestinal diseases and small intestinal ulcers.
IC50 & Target OAT3 (human, HEK293):292 ± 38.1 μM, Mock (HEK293):519 ± 55.3 μM, OAT1 (human, HEK293):239 ± 20.6 μM
体外研究
(In Vitro)

Diclofenac acyl glucuronide (1-300 μM; 0.1-2 min) 是 HEK-OATP2B1 细胞中 OATP2B1 的底物,在 pH 6.0 时具有更高的摄取活性;在 pH 6.0 条件下其 Vmax 为 27.8 pmol/min/mg、Km 为 15.2 μM,在 pH 7.4 条件下其 Vmax 为 17.6 pmol/min/mg、Km 为 14.3 μM。
Diclofenac acyl glucuronide (100-1000 μM; 3-12 h) 对 HEK-OATP2B1 细胞的细胞毒性高于 Diclofenac (MS-U62954)。
Diclofenac acyl glucuronide (100-1000 μM; 1-3 h) 可在 HEK-OATP2B1 细胞中诱导时间依赖性活性氧生成,在 1000 μM 作用 3 小时后使活性氧水平升高 5.5 倍,在 500 μM 作用 3 小时后升高 1.8 倍。
Diclofenac acyl glucuronide (50-1000 μM; 30 min) 可呈剂量依赖性抑制铜/锌超氧化物歧化酶的活性,在室温孵育 30 分钟后,250 μM 浓度下的抑制率为 27%,1000 μM 浓度下的抑制率达 100%。
Diclofenac acyl glucuronide (2 min) 可抑制纯化的 COX-1 和 COX-2 酶,在 37℃ 孵育 2 分钟后,其对 COX-1 的 IC50 为 0.620 μM,对 COX-2 的 IC50 为 2.91 μM。

Cell Cytotoxicity Assay

Cell Line: HEK-OATP2B1
Concentration: 100-1000 μM
Incubation Time: 3-12 h
Result: Induced greater cytotoxicity than diclofenac.
Caused approximately 61% cell death at 1000 μM after 3 hours.
Increased to 85% cell death at 1000 μM by 12 hours.
Showed a >2-fold increase in EthD-1 fluorescence for 1000 μM at 12 hours compared to vehicle controls.
体内研究
(In Vivo)

Diclofenac acyl glucuronide 处理对大鼠造成的肠道损伤比等摩尔剂量的 Diclofenac 更严重。
Diclofenac acyl glucuronide (含 Diclofenac acyl glucuronide 的胆汁;4 mg/kg Diclofenac 对应的摩尔量;口服;单次) 相较于等摩尔游离双氯芬酸,可显著加重 Wistar 大鼠和 TR2 大鼠的小肠溃疡,且两种品系大鼠的总溃疡长度均显著增加。

Animal Model: CRL:(Wi)BR Wistar (female, 10-12 weeks of age); TR2 (female, 10-12 weeks of age, derived from Wistar)
Dosage: Part of 4 mg/kg total dose (free diclofenac plus diclofenac acyl glucuronide)
Administration: p.o.; single dose
Result: Increased total ulcer length significantly compared to control rats receiving equimolar free diclofenac in Wistar rats.
Caused development of large ulcers and shifted lesions to more proximal intestinal areas (relative location 0.52-0.90) in Wistar rats.
Increased total ulcer length significantly compared to controls in TR2 rats.
Induced development of large ulcers not seen with free diclofenac (even at 8 mg/kg) and shifted lesions to more proximal intestinal areas (relative location 0.52-0.90) in TR2 rats.
性状 固体
颜色 White to off-white

化学信息

分子量 472.27
分子式 C20H19Cl2NO8
CAS No. 64118-81-6
别名 D-1-O-G

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础