FLT3/TrKA-IN-1 是一种有效的 FLT3/TrKA 双激酶抑制剂,对 FLT3、FLT3-ITD、FLT3-TKD 和 TrKA 酶的 IC50 值分别为 43.8 nM、97.2 nM、92.5 nM 和 23.6 nM,可诱导 G0/G1 期细胞周期停滞和细胞凋亡 (apoptosis),并具有抗增殖活性,具有研究急性髓性白血病 (AML) 的潜力。
FLT3/TrKA-IN-1
产品编号: MS-D27581 分子式: C28H30N4O2 分子量: 454.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FLT3/TrKA-IN-1 是一种有效的 FLT3/TrKA 双激酶抑制剂,对 FLT3、FLT3-ITD、FLT3-TKD 和 TrKA 酶的 IC50 值分别为 43.8 nM、97.2 nM、92.5 nM 和 23.6 nM,可诱导 G0/G1 期细胞周期停滞和细胞凋亡 (apoptosis),并具有抗增殖活性,具有研究急性髓性白血病 (AML) 的潜力。

生物实验数据

生物活性 FLT3/TrKA-IN-1 is a potent dual FLT3/TrKA kinase inhibitor with IC50 values of 43.8 nM, 97.2 nM, 92.5 nM, and 23.6 nM against FLT3, FLT3-ITD, FLT3-TKD, and TrKA enzymes, respectively; it induces G0/G1 cell cycle arrest and apoptosis (apoptosis) and exhibits antiproliferative activity, showing potential for the study of acute myeloid leukemia (AML).
IC50 & Target

TrkA

23.6 nM (IC50)

FLT3

43.8 nM (IC50)

FLT3-ITD

97.2 nM (IC50)

FLT3-TKD

92.5 nM (IC50)

体外研究
(In Vitro)

FLT3/TrKA-IN-1 (compound 4ACP) (1000, 2000, 3000, 4000, 5000 nM; 24, 48, 72 h) shows antiproliferative activity in a concentration and time-dependent pattera with IC50s of 38.8 nM, 54.9 nM for MOLM-13 and MV4-11 cells, respectively.
FLT3/TrKA-IN-1 (500, 1000, 1500, 2000, 2500 nM) dose not elicit cytotoxic activity against GDM-1 and THP-1 AML cell lines which do not carry FLT3-ITD mutation.
FLT3/TrKA-IN-1 shows potent activity against colon cancer KM12 cell line with an GI50 value of 358 nM.
FLT3/TrKA-IN-1 (0, 10, 50, 100 nM; 24 h, 48 h) inhibits ERK1/2 (extracellular regulated kinases 1/2) and mTOR (mammalian target of rapamycin) in FLT3-ITD positive AML (acute myeloid leukemia) cell lines in a dose-dependent manner.
FLT3/TrKA-IN-1 (0, 10, 50, 100 nM; 72 h) induces cell cycle arrest at the G0/G1 phase as well as apoptosis and necrotic cell death of FLT3-ITD harboring AML cells.
FLT3/TrKA-IN-1 ( 0, 1, 10, 100, 1000 nM; 72 h) dose not elicit drastic cytotoxic effects on BNL and H9c2 cells.

Cell Proliferation Assay

Cell Line: MV4-11, MOLM-13 cells
Concentration: 1000, 2000, 3000, 4000, 5000 nM
Incubation Time: 24, 48, 72 h
Result: Showed antiproliferative activity in a concentration and time-dependent pattera with IC50s of 38.8 nM, 54.9 nM for MOLM-13 and MV4-11 cells, respectively.

Western Blot Analysis

Cell Line: MV4-11, MOLM-13 cells
Concentration: 0, 10, 50, 100 nM
Incubation Time: 72 h
Result: Induced cell cycle arrest at the G0/G1 phase.

Apoptosis Analysis

Cell Line: MV4-11, MOLM-13 cells
Concentration: 0, 10, 50, 100 nM
Incubation Time: 72 h
Result: Induced apoptosis and necrotic cell death of FLT3-ITD harboring AML cells.

Cell Cytotoxicity Assay

Cell Line: BNL, H9c2 cells
Concentration: 0, 1, 10, 100, 1000 nM
Incubation Time: 72 h
Result: Did not elicit drastic cytotoxic effects on BNL and H9c2 cells.

化学信息

分子量 454.56
分子式 C28H30N4O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础