AMG 837 sodium salt

AMG 837 sodium salt 是一种口服有效的选择性 GPR40/FFA1 激动剂,对人源 GPR40 的 EC50 为 1.5 nM,能以葡萄糖依赖的方式刺激胰岛素分泌,在正常和糖尿病啮齿动物模型中有效改善血糖控制,并可结合 BacA 蛋白、损害布鲁氏菌的存活与复制,因此可用于 2 型糖尿病和布鲁氏菌病的相关研究。
产品编号: MS-D13218 CAS No.: 865231-45-4 分子式: C26H20F3NaO3 分子量: 460.42
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AMG 837 sodium salt 是一种口服有效的选择性 GPR40/FFA1 激动剂,对人源 GPR40 的 EC50 为 1.5 nM,能以葡萄糖依赖的方式刺激胰岛素分泌,在正常和糖尿病啮齿动物模型中有效改善血糖控制,并可结合 BacA 蛋白、损害布鲁氏菌的存活与复制,因此可用于 2 型糖尿病和布鲁氏菌病的相关研究。

生物实验数据

生物活性 AMG 837 sodium salt is an orally effective and selective GPR40/FFA1 agonist with an EC50 of 1.5 nM for human GPR40 that stimulates insulin secretion in a glucose-dependent manner, effectively improves glycemic control in normal and diabetic rodent models, binds BacA protein to impair Brucella survival and replication, and is therefore useful for research on type 2 diabetes and brucellosis.
体外研究
(In Vitro)

AMG 837 sodium salt 可在 A9_GPR40 细胞中刺激肌醇磷酸积累,其 EC50 为 7.8 nM。
AMG 837 sodium salt 可强效且选择性地刺激 CHO 细胞中经由人源 GPR40 的 Ca2+ 内流,其 EC50 为 13.5 nM,且对同源的人源 GPR41、GPR43 或 GPR120 受体无活性。
AMG 837 sodium salt 可在多种临床前物种中激活 GPR40,在 CHO 细胞水母发光素测定中,其 EC50 值分别为小鼠 22.6 nM、大鼠 31.7 nM、犬 71.3 nM 以及恒河猴 30.6 nM。
AMG 837 sodium salt 对人源 GPR40 的效力在血清白蛋白或人血清存在时会降低,在 0.625% HSA 中的 EC50 值为 210 nM,在 100% 人血清中的 EC50 值为 2140 nM。
AMG 837 (1 μM) sodium salt 以葡萄糖依赖的方式增强原代小鼠胰岛的胰岛素分泌活性。
AMG 837 sodium salt 抑制 B. melitensis TZ, B. melitensis M5-90, B. suis S2, 和 B. abortus A19 的生长。
AMG 837 (4-16 μg/mL; 6-48 h) sodium salt 可在 4 μg/mL 浓度下有效抑制 RAW264.7 细胞内的 B. melitensis TZ,且在 6、12、24 和 48 小时的孵育过程中,16 μg/mL 浓度下可完全清除该细菌。

体内研究
(In Vivo)

AMG 837 (0.03-0.3 mg/kg; p.o.; 单次给药) sodium salt 可在正常 Sprague-Dawley 大鼠中以剂量依赖的方式改善葡萄糖耐量。
AMG 837 (0.3 mg/kg; p.o.; 单次给药) sodium salt 在正常 Sprague-Dawley 大鼠中,经两次连续葡萄糖激发后仍能有效改善糖耐量并增加葡萄糖刺激的胰岛素分泌。
AMG 837 (0.3-3 mg/kg; p.o.; 单次给药) sodium salt 通过增强葡萄糖刺激的胰岛素分泌,使胰岛素抵抗型 Zucker 肥胖大鼠的餐后血糖 AUC0-t 降低约 46%。
AMG 837 (0.03-0.3 mg/kg; p.o.; 每日一次共 21 天) sodium salt 在胰岛素抵抗的 Zucker 肥胖大鼠中可维持改善葡萄糖耐量的效力,在给药第 21 天的 0.3 mg/kg 剂量下可使葡萄糖 AUC0-t 降低 25%;其作用机制为通过持续的葡萄糖刺激胰岛素分泌,且不影响大鼠体重。

Animal Model: Sprague-Dawley (8-week-old male)
Dosage: 0.03 mg/kg; 0.1 mg/kg; 0.3 mg/kg
Administration: p.o.; single dose
Result: Did not affect baseline glucose levels 30 minutes post-dose.
Induced a dose-dependent increase in plasma insulin levels, with peak secretion at 5 and 15 minutes post-glucose challenge.
Achieved a half-maximal dose to lower post-prandial glucose of approximately 0.05 mg/kg.
Animal Model: Sprague-Dawley (8-week-old male)
Dosage: 0.3 mg/kg
Administration: p.o.; single dose
Result: Improved blood glucose levels during both glucose challenges, with reduced glucose AUC during each challenge.
Induced peak insulin secretion soon after each glucose administration, mirroring the single-challenge response.
Animal Model: Zucker fatty (fa/fa) (8-week-old male; insulin-resistant, impaired glucose tolerance model)
Dosage: 0.3 mg/kg; 1 mg/kg; 3 mg/kg
Administration: p.o.; single dose
Result: Caused baseline glucose levels to trend lower and insulin levels to trend higher 30 minutes post-dose, though neither reached statistical significance.
Reduced post-glucose challenge glucose levels at all doses, with glucose AUC reduced by ~46% for all doses.
Induced a spike in plasma insulin levels 5 and 15 minutes post-glucose challenge at all doses.
Animal Model: Zucker fatty (fa/fa) (8-week-old male; insulin-resistant, impaired glucose tolerance model)
Dosage: 0.3 mg/kg; 1 mg/kg; 3 mg/kg
Administration: p.o.; daily; 21 days
Result: On day 1, reduced glucose AUC by 17%, 34%, and 39% at 0.03, 0.1, and 0.3 mg/kg doses, respectively, with corresponding increased insulin secretion post-glucose challenge.
On day 21, reduced glucose AUC by 7%, 15%, and 25% at 0.03, 0.1, and 0.3 mg/kg doses, respectively, with increased insulin secretion in the mid- and high-dose groups post-glucose challenge.
Caused no differences in body weight between treatment and control groups over the 21-day period.

化学信息

分子量 460.42
分子式 C26H20F3NaO3
CAS No. 865231-45-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础