SMN2 modulator-1

SMN2 modulator-1 是一种可穿透血脑屏障的 SMN 调控剂,能在翻译后水平稳定 SMN 蛋白,可用于脊髓性肌萎缩症的研究。
产品编号: MS-D01303 CAS No.: 1537150-15-4 分子式: C14H12ClFN2O2S 分子量: 326.77
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SMN2 modulator-1 是一种可穿透血脑屏障的 SMN 调控剂,能在翻译后水平稳定 SMN 蛋白,可用于脊髓性肌萎缩症的研究。

生物实验数据

生物活性 SMN2 modulator-1 is a blood-brain barrier-penetrant SMN modulator that stabilizes SMN protein at the post-translational level and can be used for the study of spinal muscular atrophy.
体外研究
(In Vitro)

SMN2 modulator-1 (Compound 27) (0.29-30 μM;24 小时) 可强效激活 SMN2 报告细胞中的 SMN2 表达,其 EC50 为 0.29 μM,活性可达对照组的 190%。
SMN2 modulator-1 (0.4-10 μM;48 小时) 可呈剂量依赖性地使 GM003813T 型 SMA 人源成纤维细胞中的 SMN 蛋白水平升高;在 2 μM 处理 48 小时的条件下,蛋白水平约升高 2 倍。
SMN2 modulator-1 在 pH 7.4 的条件下,动力学溶解度为 31 μM,小鼠肝微粒体半衰期为 39 分钟,人肝微粒体半衰期大于 120 分钟,小鼠血浆半衰期为 326 分钟。
SMN2 modulator-1 (1-30 μM;30 分钟-8 小时) 不会抑制 HEK293 细胞中的蛋白酶体或自噬,也不会在体外抑制 HPV-16 E6 介导的 p53 降解,表明其 SMN 稳定效应并非源于全局蛋白质降解抑制。
SMN2 modulator-1 在 Caco-2 细胞模型中表现出良好的肠道通透性,其顶侧到底侧的 Papp 值为 15 × 10-6 cm/s。

Western Blot Analysis

Cell Line: hTERT-immortalized SMA patient fibroblasts (GM003813T)
Concentration: 0.4 μM; 2 μM; 10 μM
Incubation Time: 48 h
Result: Produced a dose-dependent increase in SMN protein levels.
Increased SMN protein levels to approximately 2-fold relative to DMSO control at 2 μM.
体内研究
(In Vivo)

SMN2 modulator-1 (Compound 27) (20 mg/kg;腹腔注射或口服;单次给药) 腹腔注射给药后,可在成年小鼠中实现较高的血浆和脑暴露量,且脑血浆比值理想;而相同剂量的口服给药仅能产生中等偏低的暴露量。

Animal Model: mice (adult)
Dosage: 20 mg/kg
Administration: i.p. or p.o.; single dose
Result: Reached a plasma Cmax of 7660 ng/mL, plasma AUC0-24h of 34291 ng·h/mL, plasma Tmax of 0.5 h, plasma T1/2 of 2.2 h, brain Cmax of 13500 ng/mL, brain AUC0-24h of 51310 ng·h/mL, brain Tmax of 0.5 h, brain T1/2 of 1.9 h, and a brain-to-plasma ratio of 1.5:1 following intraperitoneal dosing.
Reached a plasma Cmax of 286 ng/mL, plasma AUC0-24h of 1641 ng·h/mL, plasma Tmax of 0.5 h, plasma T1/2 of 3.4 h, brain Cmax of 446 ng/mL, brain AUC0-24h of 2223 ng·h/mL, brain Tmax of 0.5 h, brain T1/2 of 2.8 h, and a brain-to-plasma ratio of 1.4:1 following oral dosing.

化学信息

分子量 326.77
分子式 C14H12ClFN2O2S
CAS No. 1537150-15-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础