XIAP-CASP7 PPI-IN-1

XIAP-CASP7 PPI-IN-1 是一种可逆的 XIAP: CASP7 抑制剂,能特异性破坏 XIAP 与 CASP7 的相互作用,选择性诱导 MCF-7 和 caspase-3 低表达 (CASP3/DR) 三阴性乳腺癌细胞凋亡 (apoptosis),并通过下调 Paclitaxel 耐药的 MCF-7 细胞中的 β-连环蛋白及其相关 ABC 转运蛋白来克服化疗耐药性,可用于研究乳腺癌。
XIAP-CASP7 PPI-IN-1
产品编号: MS-C86073 分子式: C25H21N3O3 分子量: 411.45
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

XIAP-CASP7 PPI-IN-1 是一种可逆的 XIAP: CASP7 抑制剂,能特异性破坏 XIAP 与 CASP7 的相互作用,选择性诱导 MCF-7 和 caspase-3 低表达 (CASP3/DR) 三阴性乳腺癌细胞凋亡 (apoptosis),并通过下调 Paclitaxel 耐药的 MCF-7 细胞中的 β-连环蛋白及其相关 ABC 转运蛋白来克服化疗耐药性,可用于研究乳腺癌。

生物实验数据

生物活性 XIAP-CASP7 PPI-IN-1 is a reversible XIAP: CASP7 inhibitor that specifically disrupts the interaction between XIAP and CASP7, selectively induces apoptosis in MCF-7 and caspase-3-low (CASP3/DR) triple-negative breast cancer cells, overcomes chemoresistance by downregulating β-catenin and its associated ABC transporters in Paclitaxel-resistant MCF-7 cells, and can be used for breast cancer research.
IC50 & Target

Caspase-3

 

Caspase-7

 

Caspase-9

 

体外研究
(In Vitro)

XIAP-CASP7 PPI-IN-1 (Compound 643943) (0-50 μM, 4-24 h) 对 MCF-7 表现出最大细胞毒性作用,而这种毒性作用是通过凋亡信号介导的。
XIAP-CASP7 PPI-IN-1 (0-0.5 μM, 24 h) 通过 Asp93 与 CASP7 结合,并从 XIAP: 释放活性 CASP7,从而诱导细胞死亡。
XIAP-CASP7 PPI-IN-1 (1.25-5 μM, 24 h) 与抗癌药物具有协同作用,能有效使对 Paclitaxel 耐药的 MCF-7细胞 (7TR) 对化疗敏感。

Cell Cycle Analysis

Cell Line: Paclitaxel-resistant MCF-7 cells (7TR)
Concentration: 1.25, 2.5 and 5 μM alone or with Staurosporine (STS) (MS-F83766) and Doxorubicin (HY-15142A)
Incubation Time: 24 h
Result: Synergistically potentiated paclitaxel-induced G2M arrest and induced cell death.

Cell Cytotoxicity Assay

Cell Line: MCF-7 cells
Concentration: 3.125, 6.25, 12.5, 25, 50 and 100 μM
Incubation Time: 24 h
Result: Exhibited the greatest cytotoxic effect on MCF-7 cells, with an EC50 of 8.48 μM.
Did not kill the normal breast MCF-10A cells at 100 μM.
Exhibited the EC50 values against BT-483, MDA-MB-468 and ZR-75-1 to be 4.1, 5.2, and 6.7 μM, respectively.

Western Blot Analysis

Cell Line: MCF-7
Concentration: 20 μM
Incubation Time: 24 h
Result: Detected CASP7 activity only, and no activation of CASP3.

Western Blot Analysis

Cell Line: Paclitaxel-resistant MCF-7 cells (7TR)
Concentration: 1.25, 2.5 and 5 μM alone or with STS and Doxorubicin
Incubation Time: 24 h
Result: Decreased the levels of cleaved β-catenin and certain ABC transporter.
体内研究
(In Vivo)

XIAP-CASP7 PPI-IN-1 (Compound 643943) (20 mg/kg, i.p., 1 天 1 次, 共 2 周) 在乳腺癌小鼠模型中具有抗肿瘤活性。

Animal Model: MCF-7 and MDA-MB-468 induced xenograft model established in NOD/SCID mice
Dosage: 20 mg/kg
Administration: Intraperitoneal injection (i.p.), once daily for 2 weeks
Result: Led to a significant reduced tumor volume and induced an increase for apoptosis in tumor tissues.

化学信息

分子量 411.45
分子式 C25H21N3O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础