PTD-p65-P1 Peptide TFA

PTD-p65-P1 Peptide TFA 是一种有效的选择性核转录因子 NF-κB 抑制剂,来源于 NF-κB p65 亚单位的氨基酸残基 271-282,可选择性抑制各种炎症刺激诱导的 NF-κB 激活,下调 NF-κB 介导的基因表达,并上调细胞凋亡(apoptosis)。
PTD-p65-P1 Peptide TFA
产品编号: MS-C56397 纯度: 98.40% 分子式: C170H276F3N57O46S 分子量: 3943.52
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价

产品描述

PTD-p65-P1 Peptide TFA 是一种有效的选择性核转录因子 NF-κB 抑制剂,来源于 NF-κB p65 亚单位的氨基酸残基 271-282,可选择性抑制各种炎症刺激诱导的 NF-κB 激活,下调 NF-κB 介导的基因表达,并上调细胞凋亡(apoptosis)。

生物实验数据

生物活性 PTD-p65-P1 Peptide TFA is a potent and selective nuclear transcription factor NF-κB inhibitor derived from amino acid residues 271-282 of the p65 subunit of NF-κB, which selectively inhibits NF-κB activation induced by various inflammatory stimuli, downregulates NF-κB-mediated gene expression, and upregulates apoptosis.
IC50 & Target

NF-kappaB

体外研究
(In Vitro)

PTD-p65-P1 Peptide TFA (10-150 μM; 0-60 min; KBM-5 cells) inhibits TNF-induced NF-κB activation in a dose-dependent manner and suppresses TNF-induced NF-κB activation by 25% at 100 μM and completely at 150 μM.
PTD-p65-P1 Peptide TFA (150 μM; 0-60 min; KBM-5 cells) inhibits cytoplasmic p65 phosphorylation and nuclear translocation.
PTD-p65-P1 Peptide TFA (100 μM; 16 h; KBM-5 cells) potentiates the TNF-induced apoptosis from 4 to 45%.
PTD-p65-P1 Peptide TFA (150 μM; A 293 cells) inhibits NF-κB-dependent reporter gene expression induced by TNF.
PTD-p65-P1 Peptide TFA (150 μM; 12-24 h; SP-53 cells ) inhibits the cell proliferation.

Western Blot Analysis

Cell Line: KBM-5 cells
Concentration: 150 μM
Incubation Time: 0, 5, 10, 15, 30 and 60 minutes
Result: Suppressed TNF-induced NF-κB activation by inhibiting phosphorylation and nuclear translocation of p65.

Cell Proliferation Assay

Cell Line: SP-53 cells
Concentration: 150 μM
Incubation Time: 12 and 24 hours
Result: Inhibited cell proliferation of 40% in 12 hours and 60% in 24 hours.
性状 固体
颜色 White to off-white

化学信息

分子量 3943.52
分子式 C170H276F3N57O46S

储存&溶解度

储存方式

Sealed storage, away from moisture and light, under nitrogen

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : ≥ 100 mg/mL (25.36 mM)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O1 mM0.2536 mL1.2679 mL2.5358 mL6.3395 mL
5 mM0.0507 mL0.2536 mL0.5072 mL1.2679 mL
10 mM0.0254 mL0.1268 mL0.2536 mL0.6340 mL
15 mM0.0169 mL0.0845 mL0.1691 mL0.4226 mL
20 mM0.0127 mL0.0634 mL0.1268 mL0.3170 mL
25 mM0.0101 mL0.0507 mL0.1014 mL0.2536 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础