Anticonvulsant agent 11

Anticonvulsant agent 11 (Compound 8b) 是一种抗惊厥剂,通过提高细胞活力和降低 ROS 水平发挥神经保护作用,并可诱导 GABAA α1 的表达而导致神经元超极化,同时增加神经突细胞的数量和神经突的长度,在小鼠中表现出剂量依赖性的抗惊厥作用,可用于癫痫的研究。
Anticonvulsant agent 11
产品编号: MS-C36693 分子式: C25H15Cl4N5 分子量: 527.23
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Anticonvulsant agent 11 (Compound 8b) 是一种抗惊厥剂,通过提高细胞活力和降低 ROS 水平发挥神经保护作用,并可诱导 GABAA α1 的表达而导致神经元超极化,同时增加神经突细胞的数量和神经突的长度,在小鼠中表现出剂量依赖性的抗惊厥作用,可用于癫痫的研究。

生物实验数据

生物活性 Anticonvulsant agent 11 (Compound 8b) is an anticonvulsant agent that exerts neuroprotective effects by enhancing cell viability and reducing ROS levels, induces GABAA α1 expression leading to neuronal hyperpolarization, increases the number of neurite cells and neurite length, exhibits dose-dependent anticonvulsant effects in mice, and can be used for the study of epilepsy.
体外研究
(In Vitro)

Anticonvulsant agent 11 (1-40 μM; 24 h) 在浓度高达 20 μM 时不会对 SHSY-5Y 细胞产生显著的神经毒性,但在 40 μM 浓度下会导致细胞活力下降。
Anticonvulsant agent 11 (1-50 μM; 24 h) 在浓度不超过 10 μM 时不会在 Neuro2a 细胞中诱导显著的神经毒性,但在 50 μM 浓度下会导致细胞活力下降。
Anticonvulsant agent 11 (5-10 μM; 24 h) 可提高 Neuro2a 细胞中带有神经突的细胞比例及神经突长度,其中 10 μM 浓度下的效果相较于 NGF 处理具有显著性。
Anticonvulsant agent 11 (1-10 μM; 24 h) 可通过提高细胞活力保护 SHSY-5Y 细胞免受 PTZ 诱导的神经毒性。

Cell Viability Assay

Cell Line: SHSY-5Y
Concentration: 1-10 μM
Incubation Time: 24 h
Result: Substantially increased cell viability in PTZ-exposed cells compared with PTZ alone-treated cells at 1, 5, and 10 μM.
Induced better cell viability (86.69%) compared to diazepam (75.79%).
体内研究
(In Vivo)

Compound 8b (1-4 mg/kg;腹腔注射;单次) 在戊四氮 (PTZ) 诱导的急性癫痫小鼠模型中呈现剂量依赖性抗惊厥作用,可显著延迟癫痫发作起始时间,缩短发作时长、降低发作频率与严重程度。

Animal Model: Swiss albino mice (either sex, 20-40 g, acute seizures induced by pentylenetetrazole)
Dosage: 1 mg/kg; 2 mg/kg; 4 mg/kg
Administration: i.p.; single dose (30 minutes prior to seizure induction)
Result: Significantly delayed the latency of myoclonic and clonic seizures, reduced the duration of myoclonic and clonic seizures, reduced the number of jerks, and reduced seizure severity score compared to the PTZ-only group (1 mg/kg).
Significantly delayed the latency of myoclonic and clonic seizures, reduced the duration of myoclonic and clonic seizures, reduced the number of jerks, and reduced seizure severity score compared to the PTZ-only group (2 mg/kg).
Significantly delayed the latency of myoclonic and clonic seizures, reduced the duration of myoclonic and clonic seizures, reduced the number of jerks, and reduced seizure severity score compared to the PTZ-only group; efficacy was comparable to diazepam (4 mg/kg).

化学信息

分子量 527.23
分子式 C25H15Cl4N5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础