Madindoline A 是一种具有口服活性的 gp130 拮抗剂(KD 为 288 μM),可抑制 IL-6 和 IL-11 诱导的破骨细胞生成、IL-6 刺激的血清淀粉样 A 蛋白产生、骨吸收和骨丢失,以及依赖 IL-6 与 IL-11 的细胞系生长和依赖 IL-6 的 Stat3 酪氨酸磷酸化,并可用于研究激素依赖性绝经后骨质疏松症。
产品编号: MS-C08824 CAS No.: 184877-64-3 分子式: C22H27NO4 分子量: 369.45
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Madindoline A 是一种具有口服活性的 gp130 拮抗剂(KD 为 288 μM),可抑制 IL-6 和 IL-11 诱导的破骨细胞生成、IL-6 刺激的血清淀粉样 A 蛋白产生、骨吸收和骨丢失,以及依赖 IL-6 与 IL-11 的细胞系生长和依赖 IL-6 的 Stat3 酪氨酸磷酸化,并可用于研究激素依赖性绝经后骨质疏松症。

生物实验数据

生物活性 Madindoline A is an orally active gp130 antagonist with a KD of 288 μM that inhibits IL-6- and IL-11-induced osteoclastogenesis, IL-6-stimulated serum amyloid A protein production, bone resorption and bone loss, as well as the growth of IL-6- and IL-11-dependent cell lines and IL-6-dependent Stat3 tyrosine phosphorylation, and can be used for the study of hormone-dependent postmenopausal osteoporosis.
IC50 & Target

IL-6

 

Stat-3

 

体外研究
(In Vitro)

Madindoline A (0.5-70 μM;72 h) 是 IL-6 依赖型 MH-60 细胞中 IL-6 应答的竞争性选择性拮抗剂,pA2 值为 4.78,且不会影响由 IL-2、IL-3、TNF 介导的细胞生长,也不会影响非 IL-6 依赖条件下的细胞生长。
Madindoline A (70 μM; 72 h) 可显著抑制 IL-6 诱导的 M1 细胞向巨噬细胞样细胞的分化,但不影响基础分化或 LIF 诱导的分化。
Madindoline A (100 μM; 15 min) 可抑制 HepG2 细胞中由 IL-6 诱导的 STAT3 酪氨酸磷酸化,但不影响由 LIF 诱导的 STAT3 磷酸化。
Madindoline A (30 μM;4 days) 可显著抑制小鼠颅盖骨成骨细胞与骨髓细胞共培养体系中由 IL-6 和 IL-11 诱导的破骨细胞形成,但对由 LIF、IL-1 或 1α,25 (OH) 2D3 诱导的破骨细胞形成无影响。

Cell Proliferation Assay

Cell Line: IL-6-dependent MH-60 cells; IL-2-dependent CTLL-2 cells; IL-3-dependent Baf3 cells; TNF-sensitive L929 cells; IL-6-independent MH-60 cells
Concentration: 0.5, 1.75, 3.5, 7, 17.5, 35, 70 μM
Incubation Time: 72 h
Result: Did not alter growth of IL-2-dependent CTLL-2 cells, IL-3-dependent Baf3 cells, or TNF-sensitive L929 cells, nor inhibit growth of IL-6-independent MH-60 cells.
Dose-dependently suppressed IL-6-induced cell growth of IL-6-dependent MH-60 cells and caused parallel rightward shifts of IL-6 dose-response curves.
Yielded a pA2 value of 4.78 and a slope of 0.99 via Schild plot analysis, confirming competitive antagonism.

Cell Differentiation Assay

Cell Line: M1 cells
Concentration: 70 μM (pre-incubation with IL-6)
Incubation Time: 72 h (pre-incubation with IL-6); 24 h (bead incubation)
Result: Significantly decreased the population of differentiated macrophage-like cells induced by IL-6.
Did not alter differentiation status relative to untreated cells when used alone.
体内研究
(In Vivo)

Madindoline A (10-60 mg/kg;口服;单次给药) 可剂量依赖性地抑制小鼠体内 IL-6 诱导的血清淀粉样蛋白 A (SAA) 生成。
Madindoline A (60 mg/kg;口服;隔日一次;持续 4 周) 可显著抑制去卵巢小鼠的骨吸收与骨丢失,且不影响其子宫重量或血清 IL-6 水平。

Animal Model: C3H/HeJ (6-week-old female; acute-phase response induced by intraperitoneal injection of 1 μg rhIL-6 per mouse)
Dosage: 10 mg/kg; 60 mg/kg
Administration: p.o.; single dose
Result: Reduced IL-6-induced serum amyloid A (SAA) levels to 34.7 ng/mL.
Reduced IL-6-induced serum amyloid A (SAA) levels to 16.3 ng/mL.
Animal Model: ddY (4-week-old female; postmenopausal osteoporosis induced by bilateral ovariectomy)
Dosage: 10 mg/kg; 60 mg/kg
Administration: p.o.; every other day; 4 weeks
Result: Did not produce significant changes in measured parameters (bone mass, serum calcium, uterine weight, serum IL-6 levels).
Significantly suppressed ovariectomy-induced bone loss, resulting in a bone mass ratio of 1.92.
Reduced serum calcium levels to 11.3 mg/dL.
Did not alter uterine weight or serum IL-6 levels.

化学信息

分子量 369.45
分子式 C22H27NO4
CAS No. 184877-64-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础