Aklavin 是由链霉菌菌株 A 1165 产生的 Aclacinomycin A (MS-L32758) 结构类似物,具备 Z-DNA 诱导与稳定能力,兼具抗生素、抗噬菌体及广谱抗微生物活性,能够抑制多种病毒(如流感病毒、脊髓灰质炎病毒)的增殖并干扰其核蛋白合成,同时对葡萄球菌、分枝杆菌及特定真菌表现出抑制作用,还能通过调控宿主-寄生虫关系阻断噬菌体诱导的细菌裂解,对受精鸡蛋和小鼠表现出特定毒性,且不会改变 SMN2 基因的剪接。
产品编号: MS-C04560 CAS No.: 60504-57-6 分子式: C30H35NO10 分子量: 569.60
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Aklavin 是由链霉菌菌株 A 1165 产生的 Aclacinomycin A (MS-L32758) 结构类似物,具备 Z-DNA 诱导与稳定能力,兼具抗生素、抗噬菌体及广谱抗微生物活性,能够抑制多种病毒(如流感病毒、脊髓灰质炎病毒)的增殖并干扰其核蛋白合成,同时对葡萄球菌、分枝杆菌及特定真菌表现出抑制作用,还能通过调控宿主-寄生虫关系阻断噬菌体诱导的细菌裂解,对受精鸡蛋和小鼠表现出特定毒性,且不会改变 SMN2 基因的剪接。

生物实验数据

生物活性 Aklavin is a structural analog of Aclacinomycin A (MS-L32758) produced by Streptomyces strain A 1165 that possesses Z-DNA induction and stabilization capability along with antibiotic, anti-phage, and broad-spectrum antimicrobial activities, inhibits the proliferation of multiple viruses (such as influenza virus and poliovirus) and interferes with their nucleoprotein synthesis, exhibits inhibitory effects on Staphylococcus, Mycobacterium, and specific fungi, blocks phage-induced bacterial lysis by modulating host-parasite relationships, shows specific toxicity to fertilized eggs and mice, and does not alter SMN2 gene splicing.
体外研究
(In Vitro)

Aklavin (0.001-5.0 mg/mL) 对游离噬菌体颗粒表现出不同程度的吞噬活性,其中副伤寒普那噬菌体 1 的敏感性最高 (0.05 mg/mL 时灭活率达 99%),而蜡样芽孢杆菌噬菌体的敏感性最低 (5.0 mg/mL 时灭活率仅 33%);且其灭活游离噬菌体所需的浓度远高于抑制噬菌体介导裂解所需的浓度。
Aklavin 通过琼脂稀释法以不同效力抑制细菌生长,对马铃薯环腐棒杆菌的效力最高 (孵育 72 小时后最低抑菌浓度为 1.56 μg/mL),对 7 种细菌的效力最低 (孵育 24 小时后最低抑菌浓度>100 μg/mL)。
Aklavin hydrochloride (0.1-10 nM; 5 days) 不会改变 SV40 转化的 I 型 SMA 成纤维细胞系 3061 中的 SMN2 剪接模式。

RT-PCR

Cell Line: SV40-transformed type I SMA fibroblast cell line 3061
Concentration: 0.1 nM, 1 nM, 10 nM
Incubation Time: 5 days
Result: Failed to alter the SMN2 splicing pattern.
Remained comparable to untreated or DMSO-treated cells in full-length SMN transcript levels and the ratio of full-length to Δexon 7 isoforms.
体内研究
(In Vivo)

Aklavin (0.002-1.0 mg/mL; 注射;病毒预孵育 1 小时后给药) 可在体内灭活东部马脑炎病毒,其中 1.0 mg/mL 剂量可完全保护所有小鼠抵御 1% 病毒剂量的感染,0.01 mg/mL 剂量可完全保护所有小鼠抵御 0.1% 病毒剂量的感染。
Aklavin (0.002-0.05 mg/kg; 腹腔注射) 不会抑制小鼠的疱疹感染。

Animal Model: Mice with Eastern equine encephalomyelitis
Dosage: 0.002 mg/mL, 0.01 mg/mL, 0.1 mg/mL, 1.0 mg/mL
Administration: injection; post 1-hour pre-incubation with virus
Result: Protected all six mice from 0.1% virus when dosed at 0.01 mg/mL, 0.1 mg/mL, or 1.0 mg/mL.
Resulted in 1 survivor out of six mice from 0.1% virus when dosed at 0.002 mg/mL.
Protected all six mice from 1% virus when dosed at 1.0 mg/mL.
Resulted in 1 survivor out of six mice from 1% virus when dosed at 0.1 mg/mL.
Resulted in 3 survivors out of six mice from 1% virus when dosed at 0.01 mg/mL.
Animal Model: Mice with Herpetic infection
Dosage: 0.002 mg/kg, 0.05 mg/kg
Administration: i.p.
Result: Showed no effect on herpetic infection in mice at 0.002 mg/kg dose.
Showed no effect on herpetic infection in mice at 0.05 mg/kg dose.

化学信息

分子量 569.60
分子式 C30H35NO10
CAS No. 60504-57-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础