BMP2-derived peptide

BMP2-derived peptide 是一种成骨诱导剂及 BMP 受体配体,通过与细胞表面的 BMP 受体结合形成复合物,激活下游 Smad 信号通路并调控成骨转录因子的表达,从而有效促进骨髓间充质干细胞的黏附、增殖、成骨分化及矿化,显著上调 OCN、Runx2 和 Ⅰ 型胶原的 mRNA 水平,并提升碱性磷酸酶活性与钙沉积量;它可诱导成骨细胞分化与异位骨再生,改善颅骨骨缺损修复,同时能增强介孔二氧化硅纳米颗粒的细胞相容性,与 Dexamethasone (MS-E10819) 协同提升成骨活性,并可从 CS-P24/HA 支架中实现长达 90 天的缓释,是骨缺损修复研究的重要工具。
产品编号: MS-C03288 纯度: 98.04% CAS No.: 836606-84-9 分子式: C97H165N23O29 分子量: 2117.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

BMP2-derived peptide 是一种成骨诱导剂及 BMP 受体配体,通过与细胞表面的 BMP 受体结合形成复合物,激活下游 Smad 信号通路并调控成骨转录因子的表达,从而有效促进骨髓间充质干细胞的黏附、增殖、成骨分化及矿化,显著上调 OCN、Runx2 和 Ⅰ 型胶原的 mRNA 水平,并提升碱性磷酸酶活性与钙沉积量;它可诱导成骨细胞分化与异位骨再生,改善颅骨骨缺损修复,同时能增强介孔二氧化硅纳米颗粒的细胞相容性,与 Dexamethasone (MS-E10819) 协同提升成骨活性,并可从 CS-P24/HA 支架中实现长达 90 天的缓释,是骨缺损修复研究的重要工具。

生物实验数据

生物活性 BMP2-derived peptide is an osteoinductive agent and BMP receptor ligand that binds to cell-surface BMP receptors to form a complex, activating the downstream Smad signaling pathway and regulating the expression of osteogenic transcription factors, thereby effectively promoting the adhesion, proliferation, osteogenic differentiation, and mineralization of bone marrow mesenchymal stem cells, significantly upregulating the mRNA levels of OCN, Runx2, and type I collagen, and enhancing alkaline phosphatase activity and calcium deposition; it can induce osteoblast differentiation and ectopic bone regeneration, improve cranial bone defect repair, and simultaneously enhance the cytocompatibility of mesoporous silica nanoparticles, synergize with Dexamethasone (MS-E10819) to increase osteogenic activity, and achieve sustained release for up to 90 days from CS-P24/HA scaffolds, making it an important tool for bone defect repair research.
IC50 & Target

RUNX2

 

体外研究
(In Vitro)

BMP2-derived peptide (50-100 μg/mL; 24-48 h) 与介孔二氧化硅纳米颗粒 (MSNs) 共价偶联后 (即 MSNs-pep),可显著增强大鼠骨髓间充质干细胞 (BMSCs) 对该纳米颗粒的细胞摄取。
BMP2-derived peptide (25-100 μg/mL; 7-21 d),当与介孔二氧化硅纳米颗粒 (MSNs) 共价偶联时 (即 MSNs-pep),可显著上调大鼠骨髓间充质干细胞 (BMSCs) 中的碱性磷酸酶 (ALP) 活性;孵育 21 天后。
BMP2-derived peptide 接枝 PLAF/PLEOF 纳米颗粒 (2 mg/mL; 2-24 h) 在成骨培养基中可被大鼠骨髓基质细胞呈时间依赖性摄取,且孵育 6 h 时的摄取量显著高于未接枝的纳米颗粒。
BMP2-derived peptide 接枝 PLAF/PLEOF 纳米颗粒 (200 ng/mL; 7-21 d) 在成骨培养基中处理的大鼠骨髓基质细胞,孵育 21 天后呈现出明显的聚集和分化形态。

Immunofluorescence

Cell Line: rat bone mesenchymal stem cells (BMSCs)
Concentration: 50 μg/mL (equivalent to ~400 ng/mL BMP2-derived peptide)
Incubation Time: 21 days
Result: Induced significantly higher RUNX2 expression compared to osteoconductive medium alone.
Induced significantly higher osteocalcin expression compared to osteoconductive medium alone.

Cell Differentiation Assay

Cell Line: Rat bone marrow stromal cells
Concentration: 200 ng/mL
Incubation Time: 7, 21 days (37 °C in 5% CO2)
Result: Induced high levels of aggregation in rat bone marrow stromal cells after 21 days of incubation, forming star and circular patterns characteristic of osteogenic differentiation.
体内研究
(In Vivo)

BMP2-derived peptide 功能化的 MSNs (每枚植入物 100 μg;肌内注射;单次给药) 可在肌内植入的大鼠体内诱导异位骨形成。
BMP2-derived peptide (100 μg;肌内植入;单次给药) 可在给药后 3 周诱导雄性 Sprague-Dawley 大鼠形成异位骨。
BMP2-derived peptide (100 μg+20 μg Dexamethasone (MS-E10819);肌内植入;单次) 可在给药 3 周后诱导雄性 Sprague-Dawley 大鼠产生更多的异位骨形成。

Animal Model: Sprague-Dawley rat with Ectopic bone formation (SD) (4-week-old, male)
Dosage: 100 µg
Administration: intramuscular implantation; single dose
Result: Showed calcified deposits (white shadows) in the area surrounding the implanted region via CT imaging.
Confirmed the presence of newly formed bone at the implant site via HE staining.
Animal Model: Sprague-Dawley rat with Ectopic bone formation (SD) (4-week-old, male)
Dosage: 100 µg (BMP2-derived peptide); 20 µg (DEX)
Administration: intramuscular implantation; single dose
Result: Showed more obvious mineralization (calcified deposits) in the area surrounding the implanted region via CT imaging compared to the MSNs-pep group.
Confirmed a greater amount of newly formed bone at the implant site via HE staining compared to the MSNs-pep group.
性状 固体
颜色 White to off-white

化学信息

分子量 2117.48
分子式 C97H165N23O29
CAS No. 836606-84-9

储存&溶解度

储存方式

Sealed storage, away from moisture and light

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (47.23 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM0.4723 mL2.3613 mL4.7226 mL11.8065 mL
5 mM0.0945 mL0.4723 mL0.9445 mL2.3613 mL
10 mM0.0472 mL0.2361 mL0.4723 mL1.1806 mL
15 mM0.0315 mL0.1574 mL0.3148 mL0.7871 mL
20 mM0.0236 mL0.1181 mL0.2361 mL0.5903 mL
25 mM0.0189 mL0.0945 mL0.1889 mL0.4723 mL
30 mM0.0157 mL0.0787 mL0.1574 mL0.3935 mL
40 mM0.0118 mL0.0590 mL0.1181 mL0.2952 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础