TDP1-IN-6 是一种 IC50 为 1.52 μM 的 TDP1 抑制剂,与 Topotecan (MS-X01138) 联用可增强 DNA 损伤、诱导凋亡 (Apoptosis)、诱导 S 期细胞周期阻滞并诱导铁死亡 (Ferroptosis),可用于宫颈癌的研究。
TDP1-IN-6
产品编号: MS-B84525 分子式: C29H30N8O2 分子量: 522.60
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

TDP1-IN-6 是一种 IC50 为 1.52 μM 的 TDP1 抑制剂,与 Topotecan (MS-X01138) 联用可增强 DNA 损伤、诱导凋亡 (Apoptosis)、诱导 S 期细胞周期阻滞并诱导铁死亡 (Ferroptosis),可用于宫颈癌的研究。

生物实验数据

生物活性 TDP1-IN-6 is a TDP1 inhibitor with an IC50 of 1.52 μM that, when combined with Topotecan (MS-X01138), enhances DNA damage, induces apoptosis, induces S-phase cell cycle arrest, and induces ferroptosis, and can be used for the study of cervical cancer.
体外研究
(In Vitro)

TDP1-IN-6 (Compound 16b) 可通过稳定结合蛋白的催化结构域和 DNA 结合结构域,强效抑制纯化的 TDP1 酶,其 IC50 为 1.52 μM。
TDP1-IN-6 可抑制 HeLa 宫颈癌细胞活力,其 IC50 为 14.85 μM;与 Topotecan 联用时可产生协同细胞毒性作用。
TDP1-IN-6 (2-4 μM combined with 2 μM TPT) 可通过调控凋亡相关蛋白 (包括下调 BCL-2、上调 BAX 和活化的胱天蛋白酶),以剂量依赖的方式增强 Topotecan 诱导的 HeLa 宫颈癌细胞凋亡。

Cell Proliferation Assay

Cell Line: HeLa cervical cancer cells
Concentration: 2-4 μM TDP1-IN-6; 2 μM TPT
Incubation Time: 72 h (wound healing)
Result: Had no effect on colony formation, wound healing, or cell invasion when used alone.
Significantly reduced colony formation rates when combined with TPT: 0.50 for 2 μM TPT + 2 μM TDP1-IN-6; 0.33 for 2 μM TPT + 4 μM TDP1-IN-6.
Slowed wound healing when combined with TPT: 0.46 and 0.28 wound healing rates at 72 h for 2 μM TPT + 2 μM TDP1-IN-6 and 2 μM TPT + 4 μM TDP1-IN-6, respectively.
Reduced invasive cell counts by ~81.5% for 2 μM TPT + 4 μM TDP1-IN-6 compared to control when combined with TPT.
体内研究
(In Vivo)

TDP1-IN-6 (5-10 mg/kg;腹腔注射;每 2 天 1 次) 单独使用在 HeLa 宫颈癌异种移植模型中未表现出显著的抗肿瘤活性,但与 Topotecan 联用时,可发挥强效的协同肿瘤生长抑制作用,且仅产生极低的额外毒性。

Animal Model: Female nude mice (SPF grade)
Dosage: 5 mg/kg (monotherapy; combination with TPT); 10 mg/kg (monotherapy; combination with TPT); 0.3 mg/kg (TPT, combination)
Administration: i.p.; every 2 days
Result: Did not significantly reduce tumor growth compared to control group (monotherapy at 5 mg/kg or 10 mg/kg).
Significantly inhibited tumor growth when combined with 0.3 mg/kg TPT, resulting in significantly lower tumor weights at study end point (5 mg/kg and 10 mg/kg).
Caused only slight decreases in mouse body weight (monotherapy).
Did not exacerbate body weight loss when coadministered with TPT.
Showed extensive necrotic areas and inflammatory cell infiltration in tumors from combination treatment groups.

化学信息

分子量 522.60
分子式 C29H30N8O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础