α-Santalol

Synonyms: cis-α-Santalol
α-Santalol (cis-α-Santalol) 是一种天然存在的倍半萜,为口服有效的抗癌剂及细胞凋亡 (apoptosis) 诱导剂,可通过激活 caspase-3 驱动凋亡进程、诱导人前列腺癌细胞凋亡、降低细胞活力并导致 PARP 裂解,还可抑制 Akt/Survivin 通路以诱导细胞死亡,可用于前列腺癌与糖尿病的相关研究。
产品编号: MS-B82614 纯度: 97.62% CAS No.: 115-71-9 分子式: C15H24O 分子量: 220.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

α-Santalol (cis-α-Santalol) 是一种天然存在的倍半萜,为口服有效的抗癌剂及细胞凋亡 (apoptosis) 诱导剂,可通过激活 caspase-3 驱动凋亡进程、诱导人前列腺癌细胞凋亡、降低细胞活力并导致 PARP 裂解,还可抑制 Akt/Survivin 通路以诱导细胞死亡,可用于前列腺癌与糖尿病的相关研究。

生物实验数据

生物活性 α-Santalol (cis-α-Santalol) is a naturally occurring sesquiterpene that acts as an orally active anticancer agent and apoptosis inducer, driving apoptosis by activating caspase-3, inducing apoptosis in human prostate cancer cells, reducing cell viability, and causing PARP cleavage, as well as inhibiting the Akt/Survivin pathway to induce cell death, and can be used in research related to prostate cancer and diabetes.
IC50 & Target

Caspase 3

 

体外研究
(In Vitro)

α-Santalol (25-75 μM; 24-48 h) 可以浓度和时间依赖的方式降低雄激素非依赖性 PC-3 细胞和雄激素依赖性 LNCaP 人前列腺癌细胞的活力,其 IC50 < 50 μM,而正常人前列腺上皮 PrEC 细胞对其生长抑制作用相对不敏感。
α-Santalol (25-50 μM; 24 h) 可诱导人前列腺癌 PC-3 和 LNCaP 细胞发生凋亡性 DNA 片段化,且 LNCaP 细胞对该效应的敏感性高于 PC-3 细胞。
α-Santalol (50 μM; 24 h) 可在人前列腺癌 PC-3 和 LNCaP 细胞中诱导细胞凋亡的形态学特征,包括细胞核 DNA 固缩与碎裂。
α-Santalol (50 μM; 24 h) 可激活人前列腺癌 PC-3 和 LNCaP 细胞中的 caspase-3,且在 LNCaP 细胞中观察到的应答更为显著。
α-Santalol (25-50 μM; 24-48 h) 可在人前列腺癌 LNCaP 细胞中诱导 PARP (活化 caspase-3 的下游底物) 的切割。
α-santalol (20, 40 μM) 处理前列腺癌细胞后,导致 survivin 和 p-AKT (s-473) 表达下调,且前列腺癌细胞中总 survivin 水平显著降低。

Cell Viability Assay

Cell Line: PC-3 cells, LNCaP cells, PrEC cells
Concentration: 25 μM, 50 μM, 75 μM
Incubation Time: 24 h, 48 h
Result: Decreased PC-3 cell viability by ~75% after 24-h treatment with 50 μM.
Showed greater growth inhibition sensitivity in LNCaP cells than in PC-3 cells at 48 h.
Reduced PrEC cell viability by ~44% with 75 μM for 24 h, with minimal effects at 25 and 50 μM.
Achieved an IC50 < 50 μM in prostate cancer cells.

Apoptosis Analysis

Cell Line: PC-3 cells, LNCaP cells
Concentration: 25 μM, 50 μM
Incubation Time: 24 h
Result: Increased cytoplasmic histone-associated DNA fragmentation statistically significantly in both PC-3 and LNCaP cells after 24-h treatment with 50 μM, with an enrichment factor of ~3 in PC-3 cells and ~6 in LNCaP cells.

Apoptosis Analysis

Cell Line: PC-3 cells, LNCaP cells
Concentration: 50 μM
Incubation Time: 24 h
Result: Increased the percentage of apoptotic cells with condensed/fragmented DNA statistically significantly after 24-h treatment, which were rarely observed in control cultures.

Western Blot Analysis

Cell Line: LNCaP cells
Concentration: 25 μM, 50 μM
Incubation Time: 24-48 h
Result: Induced strong expression of cleaved 89 kDa PARP in LNCaP cell lysates.
Increased expression of cleaved 89 kDa PARP at 48 h compared to 24 h.
体内研究
(In Vivo)

α-Santalol (2.5-5% (w/v); topical application) 对 Mus musculus 中化学诱导及 UVB 诱导的皮肤癌变发挥显著的化学预防活性,且在该剂量下未观察到致癌效应。
α-Santalol (12.5-200 mg/kg; 100-200 μg/10 μL; i.p.; p.o.; i.c.v.; single dose) 可在雄性 ddY 小鼠中剂量依赖性地诱导中枢神经系统抑制效应,包括腹腔注射 50 mg/kg 时可使自主活动减少高达 95%,腹腔注射 50 mg/kg 时可抑制 95%的醋酸诱导扭体反应,且在更高剂量下可显著延长己巴比妥诱导的睡眠时间、降低体温并提高脑内 HVA/5-HIAA 水平。
α-Santalol (100 mg/kg BW; i.p.) 可使 Alloxan (MS-I85120) 诱导的糖尿病雄性瑞士白化小鼠的血糖降低 61%,并将相关生理和生化参数调节至正常血糖水平。
α-Santalol (100 mg/kg BW; i.p.) 可使 d-半乳糖诱导的氧化应激雄性瑞士白化小鼠的体重增加 27.75%,并调控关键的氧化应激和肝功能参数。

Animal Model: ddY mice (male, 23-30 g, 8 per group)
Dosage: 12.5-50 mg/kg (i.p.); 25-200 mg/kg (p.o.); 100-200 μg/10 μl (i.c.v.)
Administration: i.p.; p.o.; i.c.v.; single dose
Result: Increased hexobarbital-induced sleeping time.
Reduced acetic acid-induced writhing number.
Reduced Methamphetamine-induced locomotor activity across all intervals.
Increased brain homovanillic acid (HVA) levels to 171% of control.
Produced no significant effect on Reserpine-induced hypothermia.
Produced no significant anticonvulsant effects in chemically-induced or electroshock-induced seizure models (50 mg/kg i.p. and 200 mg/kg p.o.).
Animal Model: Swiss albino (male, adult 4 months old, 20-30 g, alloxan-induced diabetic)
Dosage: 100 mg/kg BW
Administration: i.p.
Result: Increased body weight by 8.1%.
Reduced water consumption by 89%.
Reduced serum bilirubin by 42.9%.
Reduced serum malondialdehyde (MDA) by 46.1%.
Reduced liver weight by 36.3%.
Increased liver glycogen by 87.4%.
Increased total liver protein by 23.5%.
Reduced blood glucose levels by 61% over 8 days, returning blood glucose to normoglycemic levels (93 ± 9 mg/dl on Day 8).
性状 液体(密度:0.977 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 220.35
分子式 C15H24O
CAS No. 115-71-9
别名 cis-α-Santalol

储存&溶解度

储存方式

-20°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础