XSJ81 是一种具有口服活性的抗癌剂,可显著抑制壶腹癌 (AC) DPC-X3 细胞的增殖(IC50 为 0.655 μM),抑制 DPC-X3 细胞的集落形成,阻滞细胞周期于 G2/M 期,抑制细胞迁移,并在 DPC-X3 细胞中诱导 DNA 损伤和细胞凋亡 (apoptosis),同时在 DPC-X3 异种移植瘤小鼠中展现出显著的抗肿瘤效能,可用于壶腹癌的研究。
XSJ81
产品编号: MS-B79233 分子式: C30H28N4O8S 分子量: 604.63
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

XSJ81 是一种具有口服活性的抗癌剂,可显著抑制壶腹癌 (AC) DPC-X3 细胞的增殖(IC50 为 0.655 μM),抑制 DPC-X3 细胞的集落形成,阻滞细胞周期于 G2/M 期,抑制细胞迁移,并在 DPC-X3 细胞中诱导 DNA 损伤和细胞凋亡 (apoptosis),同时在 DPC-X3 异种移植瘤小鼠中展现出显著的抗肿瘤效能,可用于壶腹癌的研究。

生物实验数据

生物活性 XSJ81 is an orally active anticancer agent that significantly inhibits the proliferation of ampullary cancer (AC) DPC-X3 cells with an IC50 of 0.655 μM, suppresses colony formation, induces G2/M cell cycle arrest, inhibits cell migration, and induces DNA damage and apoptosis (apoptosis) in DPC-X3 cells, while demonstrating significant antitumor efficacy in mice bearing DPC-X3 xenograft tumors, and can be used for the study of ampullary cancer.
IC50 & Target

Topoisomerase I

 

体外研究
(In Vitro)

XSJ81 (0.35-40 μM, 48 h) 显著抑制壶腹癌 (AC) DPC-X3 细胞的增殖,IC50 为 0.655 μM。
XSJ81 (0.35-1.4 μM, 48 h) 以剂量依赖性方式降低 DPC-X3 细胞中 EdU 荧光强度。
XSJ81 (0.003-0.011 μM, 2 周) 以剂量依赖性方式抑制 DPC-X3 细胞的集落形成。
XSJ81 (0.35-1.4 μM, 24-48 h) 使 DPC-X3 细胞阻滞于 G2/M 期,诱导剂量依赖性的细胞凋亡并抑制 DPC-X3 细胞的迁移。
XSJ81 (0.35-1.4 μM, 24 h) 在 DPC-X3 细胞核中诱导剂量依赖性的 γ-H2AX 灶形成。
XSJ81 (200-500 μM, 30 min) 阻断 Topo I 对超螺旋 pBR322 质粒 DNA 的松弛作用,保持质粒处于超螺旋状态,并促进 Topo I 蛋白的蛋白酶体降解。
XSJ81 (100-1000 nM, 0-72 h) 在腺样囊性癌类器官 (ACOs) 中诱导时间和剂量依赖性的细胞毒性。

Cell Cycle Analysis

Cell Line: DPC-X3 cells
Concentration: 0.35, 0.7, 1.4 μM
Incubation Time: 24 h
Result: Down-regulated S-phase marker CCNA1.
Up-regulated G0/G1-phase regulators CNE1 and P53.

Apoptosis Analysis

Cell Line: DPC-X3 cells
Concentration: 0.35, 0.7, 1.4 μM
Incubation Time: 48 h
Result: Induced dose-dependent apoptosis in DPC-X3 cells.
Up-regulated pro-apoptotic protein BAX.
Down-regulated anti-apoptotic protein Bcl-2.
体内研究
(In Vivo)

XSJ81 (100 mg/kg,灌胃给药,单次给药,3-14 天) 在 6 周龄雌性 BALB/c 小鼠中无死亡率。
XSJ81 (5-10 mg/kg,腹腔给药,每 48 小时一次,持续 14 天) 在 DPC-X3 异种移植瘤的裸鼠中展示出显著的抗肿瘤效能。

Animal Model: DPC-X3 cellular suspensions were subcutaneously injected into the right axillary of the nude mice through orthotopic transplantation procedure to construct the DPC-X3 xenograft model
Dosage: 5 mg/kg and 10 mg/kg
Administration: i.p., once every 48 h, 14 days
Result: Achieved significant tumor growth inhibition.
Showed no significant changes in body weight.
Induced extensive apoptotic areas in tumor tissues.

化学信息

分子量 604.63
分子式 C30H28N4O8S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础