Kushenol Z 是一种 cAMP-PDE/Akt 抑制剂,可抑制 cAMP 磷酸二酯酶活性、升高 cAMP 水平、增强 PKA 活性,并通过减弱 Akt 和 PRAS40 的磷酸化来抑制 mTOR 通路,还可通过线粒体和内质网应激通路诱导非小细胞肺癌细胞凋亡 (apoptosis),上调 CHOP、调控 Bax/Bcl-2 比值并激活 caspase-3/7/9/12,因此可用于非小细胞肺癌的相关研究。
产品编号: MS-B74804 CAS No.: 2467875-82-5 分子式: C26H28O6 分子量: 436.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Kushenol Z 是一种 cAMP-PDE/Akt 抑制剂,可抑制 cAMP 磷酸二酯酶活性、升高 cAMP 水平、增强 PKA 活性,并通过减弱 Akt 和 PRAS40 的磷酸化来抑制 mTOR 通路,还可通过线粒体和内质网应激通路诱导非小细胞肺癌细胞凋亡 (apoptosis),上调 CHOP、调控 Bax/Bcl-2 比值并激活 caspase-3/7/9/12,因此可用于非小细胞肺癌的相关研究。

生物实验数据

生物活性 Kushenol Z is a cAMP-PDE/Akt inhibitor that inhibits cAMP phosphodiesterase activity, elevates cAMP levels, enhances PKA activity, and suppresses the mTOR pathway by attenuating the phosphorylation of Akt and PRAS40; it also induces apoptosis in non-small cell lung cancer cells through mitochondrial and endoplasmic reticulum stress pathways, upregulates CHOP, modulates the Bax/Bcl-2 ratio, and activates caspase-3/7/9/12, and can therefore be used for research related to non-small cell lung cancer.
IC50 & Target

Caspase-3

 

Caspase-7

 

Caspase-9

 

Caspase-12

 

Bax

 

Bcl-2

 

体外研究
(In Vitro)

Kushenol Z (0-20 μg/mL; 24 h) 可选择性抑制 A549 和 NCI-H226 非小细胞肺癌细胞的增殖,其 IC50 分别为 5.2 μg/mL 和 7.6 μg/mL),而对 BEAS-2B 正常肺上皮细胞无显著抑制作用。
Kushenol Z (0-20 μg/mL; 12-48 h) 可呈时间依赖性抑制 A549 和 NCI-H226 非小细胞肺癌细胞的增殖。
Kushenol Z (5 μg/mL; 12-48 h) 以时间依赖的方式降低 A549 和 NCI-H226 非小细胞肺癌细胞的活力,处理 24 h 和 48 h 后可观察到细胞活力显著下降。
Kushenol Z (3-6 μg/mL; 24 h) 可在 A549 和 NCI-H226 非小细胞肺癌细胞中诱导细胞凋亡的形态学特征,包括染色质固缩和凋亡小体形成。
Kushenol Z (3-6 μg/mL; 24 h) 可通过上调 Bax/Bcl-2 比值、提高活化型 caspase-3 和活化型 caspase-9 的水平,激活 A549 和 NCI-H226 非小细胞肺癌细胞中的线粒体凋亡通路。
Kushenol Z (3-6 μg/mL; 24 h) 可通过上调剪切型 caspase-12、剪切型 caspase-7 及 CHOP 的表达水平,激活 A549 和 NCI-H226 非小细胞肺癌细胞中的内质网应激凋亡通路。
Kushenol Z (3-6 μg/mL; 24 h) 可呈剂量依赖性升高 A549 和 NCI-H226 非小细胞肺癌细胞内的 cAMP 和 PKA 水平。
Kushenol Z (6 μg/mL; 24 h) 可通过降低 p70 S6K (Thr 389) 的磷酸化水平抑制 A549 非小细胞肺癌细胞中的 mTORC1 信号通路,该效应由 PKA 活性增强介导。
Kushenol Z (6 μg/mL; 24 h) 可通过降低 Akt (Ser 473) 和 PRAS40 (Thr 246) 的磷酸化水平抑制 A549 非小细胞肺癌细胞中的 Akt 信号通路,进而抑制 mTOR 通路。

Cell Proliferation Assay

Cell Line: A549, NCI-H226, BEAS-2B
Concentration: 0, 5, 10, 15 and 20 μg/mL
Incubation Time: 24 h
Result: Selectively inhibited proliferation of A549 and NCI-H226 cells in a dose-dependent manner, with IC50 values of 5.2 μg/mL for A549 cells and 7.6 μg/mL for NCI-H226 cells.
Showed no significant inhibition of BEAS-2B normal lung epithelial cells.

Cell Proliferation Assay

Cell Line: A549, NCI-H226
Concentration: 0, 5, 10, 15 and 20 μg/mL
Incubation Time: 12, 24, 48 h
Result: Inhibited A549 and NCI-H226 cell proliferation in a time-dependent manner, with greater inhibition observed at longer incubation times.

Cell Viability Assay

Cell Line: A549, NCI-H226
Concentration: 5 μg/mL
Incubation Time: 12, 24, 48 h
Result: Reduced A549 cell viability to 85% at 12 h, 60% at 24 h, and 35% at 48 h.
Reduced NCI-H226 cell viability to 85% at 12 h, 70% at 24 h, and 35% at 48 h, with significant decreases at 24 and 48 h compared to 12 h.

Apoptosis Analysis

Cell Line: A549, NCI-H226
Concentration: 3 and 6 μg/mL
Incubation Time: 24 h
Result: Induced morphological changes including cell shrinkage, distortion, and floatage, as well as chromatin condensation and apoptotic body formation in A549 and NCI-H226 cells.\nIncreased the percentage of sub-G1 peak cells in a dose-dependent manner: in A549 cells, sub-G1 peaks were 23.91% at 3 μg/mL and 37.47% at 6 μg/mL; in NCI-H226 cells, sub-G1 peaks were 19.86% at 3 μg/mL and 30.59% at 6 μg/mL.\nIncreased the total apoptotic cell population (Q2 + Q3) in a dose-dependent manner: in A549 cells, total apoptotic cells were 35% at 3 μg/mL and 49.2% at 6 μg/mL; in NCI-H226 cells, total apoptotic cells were 30.5% at 3 μg/mL and 38.9% at 6 μg/mL.

Western Blot Analysis

Cell Line: A549, NCI-H226
Concentration: 3 and 6 μg/mL
Incubation Time: 24 h
Result: Upregulated the Bax/Bcl-2 ratio, and increased levels of cleaved caspase-3 and cleaved caspase-9 in A549 and NCI-H226 cells in a dose-dependent manner.\nIncreased levels of cleaved caspase-12, cleaved caspase-7, and CHOP in A549 and NCI-H226 cells in a dose-dependent manner.

Western Blot Analysis

Cell Line: A549
Concentration: 6 μg/mL
Incubation Time: 24 h
Result: Decreased the phosphorylation of p70 S6K (Thr 389) in A549 cells; this effect was reversed by co-treatment with the PKA inhibitor H-89 (100 nM).\nDecreased the phosphorylation of Akt (Ser 473) and PRAS40 (Thr 246) in A549 cells; this effect was partially reversed by co-treatment with the Akt activator SC79 (10 nM).

化学信息

分子量 436.50
分子式 C26H28O6
CAS No. 2467875-82-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础