| 生物活性 | CFI-400945 fumarate is a potent, selective, and orally available PLK4 inhibitor with a Ki of 0.26 nM and an IC50 of 2.8 nM. |
| IC50 & Target | AURKA:140 nM, TRKA:6 nM, TIE2/TEK:22 nM, TRKB:9 nM, PLK4:2.8 nM, AURKB/INCENP:98 nM |
| 体外研究 (In Vitro) |
CFI-400945 (compound 48) shows potent inhibitory activities against a panel of kinases, including PLK4, TRKA, TRKB, AURKA, AURKB/INCENP, and TIE2/TEK, with IC50s of 2.8, 6, 9, 140, 98, 22 nM, and EC50s of 12, 84, 88, 510, 102, 117 nM, respectively. CFI-400945 exhibits growth inhibition effects on breast, lung, ovarian and colon cancer cells. The IC50s (in μM) are as follows: SKBr-3 (5.3), Cal-51 (0.26), BT-20 (0.058), A549 (0.005), OVCAR-3 (0.018), SW620 (0.38), Colo-205 (0.017), and HCT116+/+ (0.004). CFI-400945 inhibits autophosphorylation of PLK4 at serine 305 with an EC50 value of 12.3 nM in cells overexpressing PLK4. Cancer cells treated with CFI-400945 exhibit effects consistent with PLK4 kinase inhibition, including dysregulated centriole duplication, mitotic defects, and cell death. |
| 体内研究 (In Vivo) |
Oral administration of CFI-400945 (3.0, 9.4 mg/kg) to mice bearing human cancer xenografts results in the significant inhibition of tumor growth at doses that are well tolerated. Increased antitumor activity is observed in PTEN-deficient compared to PTEN wild-type cancer xenografts. The maximum tolerated dose for once-daily administration of CFI-400945 is estimated to be 7.5-9.5 mg/kg. |
| 性状 | 固体 |
| 颜色 | White to yellow |
| 分子量 | 650.72 |
| 分子式 | C37H38N4O7 |
| CAS No. | 1616420-30-4 |
| 别名 | CFI-400945 fumarate |
| 体内实验配方 | 10% DMSO+40% PEG300+5% Tween-80+45% Saline: 1 mg/mL (1.54 mM), Sonication is recommended. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 | 4°C, sealed storage, away from moisture *In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 50 mg/mL (76.84 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。