(Z)-Aconitic acid

Synonyms: 顺乌头酸; cis-Aconitic acid
(Z)-Aconitic acid 是一种口服活性的谷氨酸脱羧酶 (glutamate decarboxylase) 抑制剂,可降低 IκB-α 磷酸化,并抑制抗原诱发的关节炎和 Monosodium urate (MS-E13881) 诱发的痛风。
产品编号: MS-B65157 纯度: 99.28% CAS No.: 585-84-2 分子式: C6H6O6 分子量: 174.11
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

(Z)-Aconitic acid 是一种口服活性的谷氨酸脱羧酶 (glutamate decarboxylase) 抑制剂,可降低 IκB-α 磷酸化,并抑制抗原诱发的关节炎和 Monosodium urate (MS-E13881) 诱发的痛风。

生物实验数据

生物活性 (Z)-Aconitic acid is an orally active glutamate decarboxylase inhibitor that reduces IκB-α phosphorylation and inhibits antigen-induced arthritis and Monosodium urate (MS-E13881)-induced gout.
体外研究
(In Vitro)

(Z)-Aconitic acid (10-90 μM;2 h) 可降低 LPS 刺激的 THP-1 巨噬细胞中的 TNF-α 释放和 IκB-α 磷酸化。

体内研究
(In Vivo)

(Z)-Aconitic acid (10-90 mg/kg,口服,AIA 模型中抗原攻击后 24 h 或痛风模型中注射 MSU 后 15 h)可抑制小鼠抗原诱发的关节炎和尿酸钠诱发的痛风,减少关节腔内白细胞的蓄积。

Animal Model: C57BL/6j male mice (8-10 weeks old) + antigen-induced arthritis (AIA) model or monosodium urate-induced gout model
Dosage: 10 mg/kg, 30 mg/kg, 90 mg/kg (0.5% w/v CMC suspension); 30 mg/kg (for gout model)
Administration: Oral gavage, once, 24 h after antigen challenge in AIA model; Oral gavage, once, 15 h after MSU injection in gout model
Result: Reduced total leukocytes and neutrophils in the synovial cavity and periarticular tissue, MPO activity, CXCL-1 levels in periarticular tissues, arthritis index, and hypernociception (AIA).
Significantly reduced total leukocyte and neutrophil accumulation into the synovial cavity at 30 mg/kg (gout model).
性状 固体
颜色 White to light yellow

化学信息

分子量 174.11
分子式 C6H6O6
CAS No. 585-84-2
别名 顺乌头酸; cis-Aconitic acid

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (11.49 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 100 mg/mL (574.35 mM; 超声助溶)

DMSO 中的溶解度 : ≥ 100 mg/mL (574.35 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM5.7435 mL28.7175 mL57.4350 mL143.5874 mL
5 mM1.1487 mL5.7435 mL11.4870 mL28.7175 mL
10 mM0.5743 mL2.8717 mL5.7435 mL14.3587 mL
15 mM0.3829 mL1.9145 mL3.8290 mL9.5725 mL
20 mM0.2872 mL1.4359 mL2.8717 mL7.1794 mL
25 mM0.2297 mL1.1487 mL2.2974 mL5.7435 mL
30 mM0.1914 mL0.9572 mL1.9145 mL4.7862 mL
40 mM0.1436 mL0.7179 mL1.4359 mL3.5897 mL
50 mM0.1149 mL0.5743 mL1.1487 mL2.8717 mL
60 mM0.0957 mL0.4786 mL0.9572 mL2.3931 mL
80 mM0.0718 mL0.3590 mL0.7179 mL1.7948 mL
100 mM0.0574 mL0.2872 mL0.5743 mL1.4359 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础