| 生物活性 | Lucitanib (E-3810) dihydrochloride is a dual inhibitor of VEGFR and FGFR that potently and selectively inhibits VEGFR1, VEGFR2, VEGFR3, FGFR1, and FGFR2 with IC50 values of 7 nM, 25 nM, 10 nM, 17.5 nM, and 82.5 nM, respectively. |
| IC50 & Target | VEGFR2:25 nM, VEGFR1:7 nM, FGFR1:17.5 nM, FGFR2:82.5 nM, VEGFR3:10 nM |
| 体外研究 (In Vitro) |
Consistent with the inhibitory activity of VEGFR and FGFR auto-phosphorylation, Lucitanib potently inhibits VEGF and bFGF-stimulated HUVEC proliferation with IC50 of 40 and 50 nM, respectively. Besides, Lucitanib (E-3810) also inhibits CSF-1R with IC50 of 5 nM. Lucitanib potently inhibits FGFR2 activity (Ki<0.05 μM), follows by PDGFRα activity (Ki=0.11 μM). The Ki values obtained for DDR2, LYN, CARDIAK, CSBP (2), EPHA2, and YES range between 0.26 and 8 μM. |
| 体内研究 (In Vivo) |
Lucitanib (E-3810), at oral dosing of 20 mg/kg for 7 consecutive days, completely inhibits (P<0.01) the bFGF induced angiogenic response compare with the response in vehicle-treated mice. Lucitanib (E-3810) shows a broad spectrum of activity, being active in all the xenografts tested (HT29 colon carcinoma, A2780 ovarian carcinoma, A498, SN12K1, and RXF393 renal carcinomas) with dose-dependent inhibition of tumor growth. E-3810 significantly delays growth during treatment, but tumors resume their growth when treatment is suspended; in a few cases, tumor regression is observed. The activity of Lucitanib (E-3810) given at the doses of 15 mg/kg is tested on MDA-MB-231 breast cancer transplanted subcutaneously, at a late stage, when tumor masses reach 350 to 400 mg. This tumor xenograft is very sensitive to Lucitanib (E-3810), with complete tumor stabilization lasting throughout the 30-day treatment. As in other tumor models, tumors re-grow after withdrawal of Lucitanib (E-3810) at a rate similar to control tumors. |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 516.42 |
| 分子式 | C26H27Cl2N3O4 |
| CAS No. | 2108875-91-6 |
| 储存方式 | 4°C, sealed storage, away from moisture *In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture) |
|||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 25 mg/mL (48.41 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
体内配方配制方法:取 μL DMSO母液,加入 μL Corn oil,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
© 2026 MolStrong. 保留所有权利。粤ICP备2023004355号
可通过CAS号进行批量搜索,一行一个CAS号