LY266097 hydrochloride

LY266097 hydrochloride 是一种选择性 5-HT2B 受体拮抗剂,对 5-HT2A、5-HT2B 和 5-HT2C 的 pKi 分别为 7.7、9.8 和 7.6,而阻断 5-HT2B 受体有助于抑郁症的研究。
产品编号: MS-B32924 纯度: 98.41% CAS No.: 172895-39-5 分子式: C21H24Cl2N2O2 分子量: 407.33
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

LY266097 hydrochloride 是一种选择性 5-HT2B 受体拮抗剂,对 5-HT2A、5-HT2B 和 5-HT2C 的 pKi 分别为 7.7、9.8 和 7.6,而阻断 5-HT2B 受体有助于抑郁症的研究。

生物实验数据

生物活性 LY266097 hydrochloride is a selective 5-HT2B receptor antagonist with pKi values of 7.7, 9.8, and 7.6 for 5-HT2A, 5-HT2B, and 5-HT2C, respectively, and blockade of the 5-HT2B receptor facilitates research on depression.
IC50 & Target 5-HT2A receptor:7.7 (pKi), 5-HT2B receptor:9.8 (pKi), 5-HT2C receptor:7.6 (pKi)
体外研究
(In Vitro)

LY266097 is a highly selective 5-HT2B receptor antagonist with a pKi of 9.7 for the human cloned 5-HT2B receptor and a 100-fold greater selectivity over human 5-HT2C and 5-HT2A sites.

体内研究
(In Vivo)

LY266097 (0.6 mg/kg for 2-day administration) rescues Escitalopram-induced decrease in dopamine (DA).
The administration of LY266097 alone or its addition on the last 3 days of a 14-day Escitalopram regimen increases pyramidal neuron firing and burst activity.

Animal Model: Male Sprague-Dawley rats weighing 250-350 g
Dosage: 0.6 mg/kg
Administration: Administered i.p. alone or concomitantly with Escitalopram (2 mg/kg) for 2 days
Result: Short-term administration (0.6 mg/kg/day for 2 days; i.p.) alone had no effect on these parameters, its co-administration counteracted the inhibitory effect of escitalopram on the firing activity of DA neurons, resulting in a recovery to control level.
性状 固体
颜色 Light yellow to light brown

化学信息

分子量 407.33
分子式 C21H24Cl2N2O2
CAS No. 172895-39-5

储存&溶解度

储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 62.5 mg/mL (153.44 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.4550 mL12.2751 mL24.5501 mL61.3753 mL
5 mM0.4910 mL2.4550 mL4.9100 mL12.2751 mL
10 mM0.2455 mL1.2275 mL2.4550 mL6.1375 mL
15 mM0.1637 mL0.8183 mL1.6367 mL4.0917 mL
20 mM0.1228 mL0.6138 mL1.2275 mL3.0688 mL
25 mM0.0982 mL0.4910 mL0.9820 mL2.4550 mL
30 mM0.0818 mL0.4092 mL0.8183 mL2.0458 mL
40 mM0.0614 mL0.3069 mL0.6138 mL1.5344 mL
50 mM0.0491 mL0.2455 mL0.4910 mL1.2275 mL
60 mM0.0409 mL0.2046 mL0.4092 mL1.0229 mL
80 mM0.0307 mL0.1534 mL0.3069 mL0.7672 mL
100 mM0.0246 mL0.1228 mL0.2455 mL0.6138 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础