Spadin 是一种从血液中释放的前肽衍生的天然肽,是有效的 TREK-1 通道阻滞剂(IC50 值为 10 nM),可增强小鼠中缝背核 5-HT 神经传递,诱导海马 CREB 激活和神经发生,并可用于抗抑郁研究。
产品编号: MS-B20278 纯度: 99.84% CAS No.: 1270083-24-3 分子式: C96H142N26O22 分子量: 2012.34
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Spadin 是一种从血液中释放的前肽衍生的天然肽,是有效的 TREK-1 通道阻滞剂(IC50 值为 10 nM),可增强小鼠中缝背核 5-HT 神经传递,诱导海马 CREB 激活和神经发生,并可用于抗抑郁研究。

生物实验数据

生物活性 Spadin is a natural peptide derived from a propeptide released into the blood that acts as a potent TREK-1 channel blocker with an IC50 value of 10 nM, enhances 5-HT neurotransmission in the mouse dorsal raphe nucleus, induces hippocampal CREB activation and neurogenesis, and can be used in antidepressant research.
体外研究
(In Vitro)

Spadin (100 nM; COS-7 cells) has inhibitory effect of spadin on the TREK-1 channel and blocks 63% of the TREK-1 current stimulated by arachidonic acid.
Spadin (100 nM) blocks the TREK-1 channels activity in CA3 hippocampal neurons on brain slices of wild-type mice.

体内研究
(In Vivo)

Spadin (10 μM; i.p.; for 30 min; male C57Bl/6J and TREK-1 deficient mice) increases of the 5-HT neuron firing rate in the dorsal raphe nucleus (DRN).
Spadin (0.01-100 μM; ICV, i.p. and i.v.; daily, for 7 days; male C57Bl/6J and TREK-1 deficient mice) has anti-depressant behavior in mice.

Animal Model: Male C57Bl/6J and TREK-1 deficient mice
Dosage: 10 μM
Administration: Intraperitoneal injection; for 30 min
Result: Increased of the 5-HT neuron firing rate in the dorsal raphe nucleus (DRN).
Animal Model: Male C57Bl/6J and TREK-1 deficient mice
Dosage: 0.01-100 μM
Administration: Intracerebroventrical injection, intraperitoneal injection and intravenous injection; daily, for 7 days
Result: Had any effect on mouse locomotion analyzed in short- or long-time after the drug injection.
性状 固体
颜色 White to off-white

化学信息

分子量 2012.34
分子式 C96H142N26O22
CAS No. 1270083-24-3

储存&溶解度

储存方式

Sealed storage, away from moisture

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : ≥ 100 mg/mL (49.69 mM)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O1 mM0.4969 mL2.4847 mL4.9693 mL12.4233 mL
5 mM0.0994 mL0.4969 mL0.9939 mL2.4847 mL
10 mM0.0497 mL0.2485 mL0.4969 mL1.2423 mL
15 mM0.0331 mL0.1656 mL0.3313 mL0.8282 mL
20 mM0.0248 mL0.1242 mL0.2485 mL0.6212 mL
25 mM0.0199 mL0.0994 mL0.1988 mL0.4969 mL
30 mM0.0166 mL0.0828 mL0.1656 mL0.4141 mL
40 mM0.0124 mL0.0621 mL0.1242 mL0.3106 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础