Palosuran hydrochloride

Synonyms: ACT-058362 hydrochloride
Palosuran hydrochloride(ACT-058362 hydrochloride)是一种有效、选择性且具有口服活性的 urotensin II receptor 拮抗剂,对表达人重组受体的 CHO 细胞膜的 IC50 值为 3.6 nM,并可改善糖尿病大鼠的胰腺和肾脏功能。
产品编号: MS-B10070 纯度: 98.67% CAS No.: 2469274-58-4 分子式: C25H31ClN4O2 分子量: 454.99
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Palosuran hydrochloride(ACT-058362 hydrochloride)是一种有效、选择性且具有口服活性的 urotensin II receptor 拮抗剂,对表达人重组受体的 CHO 细胞膜的 IC50 值为 3.6 nM,并可改善糖尿病大鼠的胰腺和肾脏功能。

生物实验数据

生物活性 Palosuran hydrochloride (ACT-058362 hydrochloride) is a potent, selective, and orally active urotensin II receptor antagonist with an IC50 of 3.6 nM for CHO cell membranes expressing the human recombinant receptor, and it improves pancreatic and renal function in diabetic rats.
IC50 & Target

IC50: 3.6 nM (human urotensin II receptor)

体外研究
(In Vitro)

Palosuran (8 h) inhibits 125I-U-II binding to human UT receptor, with IC50s of 46.2 nM on TE 671 cells and 86 nM on recombinant CHO cells.
Palosuran inhibits Ca2+ mobilization in response to human U-II in CHO cells expressing human and rat UT receptor with IC50s of 17 and >10000 nM, respectively.
Palosuran (0.12-10000 nM; 20 min) inhibits human U-II induced MAPK phosphorylation in a dose-dependent manner in recombinant CHO cells, with an IC50 of 150 nM.

体内研究
(In Vivo)

ACT-058362 (10 mg/kg/h; i.v.) fully prevents the decrease in renal blood flow after ischemia in rats without decreasing blood pressure.
Palosuran (300 mg/kg/d; p.o. for 16 weeks) improves the survival, increases insulin, and slows the increase in glycemia, glycosylated hemoglobin, and serum lipids in streptozotocin-induced diabetic rats.

Animal Model: Male Wistar rats with renal ischemia and reperfusion
Dosage: 20 mg/kg/h for 135 min
Administration: I.v. (continuous infusion) for 135 min
Result: Restored renal blood flow to baseline values at 30 min after reperfusion and by 60 min increased renal blood flow by 12% above baseline values.
Did not significantly alter mean arterial blood pressure (MAP) and heart rate (HR).
性状 固体
颜色 White to off-white

化学信息

分子量 454.99
分子式 C25H31ClN4O2
CAS No. 2469274-58-4
别名 ACT-058362 hydrochloride

储存&溶解度

储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (109.89 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 7.14 mg/mL (15.69 mM; 超声助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM2.1979 mL10.9893 mL21.9785 mL54.9463 mL
5 mM0.4396 mL2.1979 mL4.3957 mL10.9893 mL
10 mM0.2198 mL1.0989 mL2.1979 mL5.4946 mL
15 mM0.1465 mL0.7326 mL1.4652 mL3.6631 mL
DMSO20 mM0.1099 mL0.5495 mL1.0989 mL2.7473 mL
25 mM0.0879 mL0.4396 mL0.8791 mL2.1979 mL
30 mM0.0733 mL0.3663 mL0.7326 mL1.8315 mL
40 mM0.0549 mL0.2747 mL0.5495 mL1.3737 mL
50 mM0.0440 mL0.2198 mL0.4396 mL1.0989 mL
60 mM0.0366 mL0.1832 mL0.3663 mL0.9158 mL
80 mM0.0275 mL0.1374 mL0.2747 mL0.6868 mL
100 mM0.0220 mL0.1099 mL0.2198 mL0.5495 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础