Procyanidin B2-3'-O-gallate

Procyanidin B2-3'-O-gallate 是一种可从葡萄籽提取物中发现的单没食子酸酯,可通过诱导 caspase-9、caspase-3 和 PARP 的裂解、降低 Bcl-2、Bcl-Xl 和雄激素受体的水平来诱导细胞凋亡 (apoptosis),并可用于前列腺癌的研究。
产品编号: MS-B06523 CAS No.: 109280-47-9 分子式: C37H30O16 分子量: 730.62
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Procyanidin B2-3'-O-gallate 是一种可从葡萄籽提取物中发现的单没食子酸酯,可通过诱导 caspase-9、caspase-3 和 PARP 的裂解、降低 Bcl-2、Bcl-Xl 和雄激素受体的水平来诱导细胞凋亡 (apoptosis),并可用于前列腺癌的研究。

生物实验数据

生物活性 Procyanidin B2-3'-O-gallate is a monogallate found in grape seed extract that induces apoptosis by promoting the cleavage of caspase-9, caspase-3, and PARP and by reducing the levels of Bcl-2, Bcl-Xl, and androgen receptor, and it can be used for research on prostate cancer.
IC50 & Target

Caspase-9

 

Caspase 3

 

Bcl-2

 

Bcl-xL

 

PARP

 

体外研究
(In Vitro)

Procyanidin B2-3'-O-gallate (10-50 μM;12 小时) 通过诱导细胞死亡,呈剂量依赖性地降低雄激素依赖性人前列腺癌 LNCaP 细胞的活力。
Procyanidin B2-3'-O-gallate (10-50 μM;12 小时) 可诱导雄激素依赖性人前列腺癌 LNCaP 细胞发生显著的凋亡性死亡。
Procyanidin B2-3'-O-gallate (25 μM;6 小时) 可诱导雄激素依赖性人前列腺癌 LNCaP 细胞发生 caspase 依赖性凋亡性死亡。
Procyanidin B2-3'-O-gallate (25-50 μM;12 小时) 可呈剂量依赖性激活 caspase-9 和 caspase-3,诱导 PARP 裂解,下调抗凋亡蛋白 Bcl-XL 和 Bcl-2;且在处理 12 小时后,于 50 μM 浓度下可降低雄激素依赖性人前列腺癌 LNCaP 细胞中的雄激素受体水平。

Cell Viability Assay

Cell Line: androgen-dependent human prostate carcinoma LNCaP cells
Concentration: 10 μM; 25 μM; 50 μM
Incubation Time: 12 h
Result: Caused a 23% decrease in LNCaP cell viability (P<0.05) and a 1.45-fold increase in dead cell percentage (P<0.05) relative to DMSO-treated controls, with no change in total cell number.
Caused a 62% decrease in cell viability (P<0.001) and a 3.32-fold increase in dead cell percentage (P<0.001), with no change in total cell number.
Caused a 91% decrease in cell viability (P<0.001) and a ~4-fold increase in dead cell percentage (P<0.001), with no change in total cell number.

Apoptosis Analysis

Cell Line: androgen-dependent human prostate carcinoma LNCaP cells
Concentration: 10 μM; 25 μM; 50 μM
Incubation Time: 12 h
Result: Induced a low level of apoptotic death relative to DMSO-treated controls.
Caused 53% apoptotic death (P<0.001) relative to DMSO-treated controls.
Showed no further increase in apoptotic death relative to DMSO-treated controls.

ELISA Assay

Cell Line: androgen-dependent human prostate carcinoma LNCaP cells
Concentration: 25 μM
Incubation Time: 6 h
Result: Resulted in a 50% (P<0.01) reversal of apoptotic cell death induced by 25 μM Procyanidin B2-3'-O-gallate, indicating caspase involvement in the apoptotic pathway.

Western Blot Analysis

Cell Line: androgen-dependent human prostate carcinoma LNCaP cells
Concentration: 25 μM; 50 μM
Incubation Time: 12 h
Result: Caused a 1.3-fold increase in cleaved caspase-9 levels, a 1.1-fold increase in cleaved caspase-3 levels, a 0.9-fold change in cleaved PARP levels, a 0.5-fold decrease in Bcl-XL levels, a 0.9-fold change in Bcl-2 levels, and a 1.1-fold change in androgen receptor (AR) levels relative to DMSO-treated controls.
Caused a 2.6-fold increase in cleaved caspase-9 levels, a 2.3-fold increase in cleaved caspase-3 levels, a 2.3-fold increase in cleaved PARP levels, a 0.4-fold decrease in Bcl-XL levels, a 0.8-fold decrease in Bcl-2 levels, and a 0.7-fold decrease in AR levels relative to DMSO-treated controls.
Showed no changes in pro-apoptotic proteins Bax and Bad relative to DMSO-treated controls.

化学信息

分子量 730.62
分子式 C37H30O16
CAS No. 109280-47-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础