SMD-3236 是一种 SMARCA2 PROTAC 降解剂,DC50 = 0.5 nM、Dmax = 98%,对人源 SMARCA2 的 IC50 为 42.2 nM,可通过结合 SMARCA2 和 VHL-1 诱导 SMARCA2 蛋白发生依赖于蛋白酶体和类泛素化修饰的降解,抑制 SMARCA4 缺陷型癌细胞的生长,在肿瘤组织中诱导 SMARCA2 发生显著且持久的耗竭,并在 SMARCA4 缺陷型人源癌症异种移植模型中抑制肿瘤生长,可用于黑色素瘤、非小细胞肺癌、急性髓性白血病等 SMARCA4 缺陷型癌症的相关研究(粉色:SMARCA2 配体 (MS-X13236);蓝色:VHL 配体 (MS-M94928);黑色:连接子 (MS-Y12093))。
产品编号: MS-A92406 CAS No.: 3033586-31-8 分子式: C61H75ClN10O5S 分子量: 1095.83
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SMD-3236 是一种 SMARCA2 PROTAC 降解剂,DC50 = 0.5 nM、Dmax = 98%,对人源 SMARCA2 的 IC50 为 42.2 nM,可通过结合 SMARCA2 和 VHL-1 诱导 SMARCA2 蛋白发生依赖于蛋白酶体和类泛素化修饰的降解,抑制 SMARCA4 缺陷型癌细胞的生长,在肿瘤组织中诱导 SMARCA2 发生显著且持久的耗竭,并在 SMARCA4 缺陷型人源癌症异种移植模型中抑制肿瘤生长,可用于黑色素瘤、非小细胞肺癌、急性髓性白血病等 SMARCA4 缺陷型癌症的相关研究(粉色:SMARCA2 配体 (MS-X13236);蓝色:VHL 配体 (MS-M94928);黑色:连接子 (MS-Y12093))。

生物实验数据

生物活性 SMD-3236 is a SMARCA2 PROTAC degrader with DC50 = 0.5 nM and Dmax = 98%, and an IC50 of 42.2 nM against human SMARCA2; by binding SMARCA2 and VHL-1, it induces proteasome- and neddylation-dependent degradation of SMARCA2 protein, inhibits the growth of SMARCA4-deficient cancer cells, induces significant and sustained SMARCA2 depletion in tumor tissues, and suppresses tumor growth in SMARCA4-deficient human cancer xenograft models, making it useful for research on SMARCA4-deficient cancers such as melanoma, non-small cell lung cancer, and acute myeloid leukemia (pink: SMARCA2 ligand (MS-X13236); blue: VHL ligand (MS-M94928); black: linker (MS-Y12093)).
IC50 & Target

VHL

 

SMARCA2

 

体外研究
(In Vitro)

SMD-3236 (Compound 22) 可强效抑制 SMARCA4 缺陷型细胞系的增殖,其 GI50 值分别为 1.5 nM (SK-Mel-5)、9.5 nM (NCI-H838)、2.2 nM (NCI-H1568)、9.8 nM (NCI-H1944) 和 4.8 nM (NCI-H1693) (Imax: 71-95%),而在 SMARCA4 野生型细胞系中仅表现出极低活性 (GI50 >10 μM)。

体内研究
(In Vivo)

SMD-3236 (10-30 mg/kg,静脉注射,每周 1 次,持续 3 周) 可使 SCID 小鼠体内 SMARCA4 缺陷型 H838 异种移植瘤的生长分别抑制 87%和 91%,且未观察到毒性。
SMD-3236 (30 mg/kg;静脉注射;单次给药) 可使 SCID 小鼠 MV4-11 异种移植瘤中 SMARCA2 蛋白水平降低高达 97%,且该效应至少持续 168 h,同时会升高 SMARCA4 蛋白水平。

Animal Model: CB.17 SCID (female, 6-8 weeks old)
Dosage: 10 mg/kg; 30 mg/kg
Administration: i.v.; weekly; 3 weeks
Result: Inhibited tumor growth by 87% compared to vehicle control.
Inhibited tumor growth by 91% compared to vehicle control.
Induced minimal tumor growth after treatment cessation.
Caused no significant weight loss or other signs of toxicity throughout the experiment.
Animal Model: CB.17 SCID (female, 6-10 weeks old)
Dosage: 30 mg/kg
Administration: i.v.; single dose
Result: Reduced SMARCA2 protein levels in MV4-11 tumors by 97% at 24 h post-administration.
Reduced SMARCA2 protein levels in MV4-11 tumors by 85% at 96 h post-administration.
Reduced SMARCA2 protein levels in MV4-11 tumors by 89% at 168 h post-administration.
Increased SMARCA4 protein levels in MV4-11 tumors by 131% at 24 h post-administration.
Increased SMARCA4 protein levels in MV4-11 tumors by 110% at 96 h post-administration.
Increased SMARCA4 protein levels in MV4-11 tumors by 45% at 168 h post-administration.

化学信息

分子量 1095.83
分子式 C61H75ClN10O5S
CAS No. 3033586-31-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础