Estrogen receptor modulator 10

Estrogen receptor modulator 10(化合物 G-5b)是一种雌激素受体 (ER) 拮抗剂 (IC50=6.7 nM) 和降解剂 (DC50=0.4 nM),基于 Fulvestrant (MS-S35194) 分子开发,可通过蛋白酶体途径迅速降解 ER 受体,诱导细胞凋亡并将细胞阻滞在 G1/G0 期,可用于癌症研究。
产品编号: MS-A90204 CAS No.: 2991504-90-4 分子式: C32H37F9N4O3S 分子量: 728.71
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Estrogen receptor modulator 10(化合物 G-5b)是一种雌激素受体 (ER) 拮抗剂 (IC50=6.7 nM) 和降解剂 (DC50=0.4 nM),基于 Fulvestrant (MS-S35194) 分子开发,可通过蛋白酶体途径迅速降解 ER 受体,诱导细胞凋亡并将细胞阻滞在 G1/G0 期,可用于癌症研究。

生物实验数据

生物活性 Estrogen receptor modulator 10 (compound G-5b) is an estrogen receptor (ER) antagonist (IC50=6.7 nM) and degrader (DC50=0.4 nM) developed based on the Fulvestrant (MS-S35194) molecule that rapidly degrades ER receptor via the proteasomal pathway, induces apoptosis, arrests cells at the G1/G0 phase, and can be used for cancer research.
IC50 & Target

IC50=6.7 nM, DC50=0.4 nM

体外研究
(In Vitro)

Estrogen receptormodulator 10 (20-100 nM, 2-48 h) 在 T47D 细胞中以剂量依赖性的方式显著降低 ER 的活性,在MCF-7 细胞中对细胞 ER 的降解水平比在 T47D 细胞中晚。
Estrogen receptormodulator 10 (10 nM, 24 h) 在 MCF-7 和T47D 细胞中能够降低 E2 刺激产生的TFF-1 (trefoil factor 1)、 PgR (progesterone receptor) and GRBE1 (growth regulation by estrogen in breast cancer 1) 的表达。
Estrogen receptormodulator 10 (4-100 nM, 24 h) 在 MCF-7 细胞中能够诱导细胞凋亡,显著增强了 caspase-3 和 caspase-9 的活性。
Estrogen receptormodulator 10 (4-100 nM, 24 h) 在 MCF-7 细胞中能够抑制G1/G0 期蛋白的表达。
Estrogen receptormodulator 10 (0.2-1 nM, 6 d) 显著抑制了由 E2 介导的 MCF-7 和 T47D 细胞的增殖。
Estrogen receptormodulator 10 (4-100 nM, 24 h) 在 MCF-7 细胞中显著降低了细胞迁移和增殖细胞核抗原水平。
Estrogen receptormodulator 10 (20-100 nM, 24 h) 在 MCF-7 细胞中降低了细胞质和细胞核中的 ER,促进 ER 从细胞核转到细胞质中。ER通过蛋白酶体途径迅速降解,而不影响相应mRNA的表达。

Cell Viability Assay

Cell Line: T47D, MCF-7
Concentration: 100 nM
Incubation Time: 24 h
Result: Significantly decreased the activity of ER in a dose-dependent manner.

RT-PCR

Cell Line: T47D, MCF-7
Concentration: 10 nM
Incubation Time: 24 h
Result: Had antagonistic activity against ER signaling.

Cell Cycle Analysis

Cell Line: MCF-7
Concentration: 4 nM, 20 nM, 100 nM
Incubation Time: 24 h
Result: Blocked cells in the G1/G0 phase with a dose-dependent manner.

Cell Proliferation Assay

Cell Line: T47D, MCF-7
Concentration: 0.2 nM for MCF-7 cells
1 nM for T47D cells
Incubation Time: 6 d
Result: Could selectively inhibit the proliferation and migration of ER-positive breast cancer cells without affecting ER-negative ones.

Cell Proliferation Assay

Cell Line: T74DWT, T74DY537S, T74DD538G
Concentration: 2.21 nM for T74DWT
5.94 nM for T74DY537S
58.57 nM for T74DD538G
Incubation Time: 5 d
Result: Inhibited mutant cell proliferation in a dose-dependent manner.
体内研究
(In Vivo)

Estrogen receptormodulator 10 (30 mg/kg, 肌肉注射 (i.m.), 单剂量) 在雌性 Sprague-Dawley小鼠中有良好的药代动力学特性。

Animal Model: Female Sprague-Dawley Rats
Dosage: 30 mg/kg
Administration: Intramuscular injection (i.m.), single dose
Result: Showed apparent distribution volume (Vz_F_obs≈1600 L) was nearly 1.3 times smaller than that of fulvestrant (Vz_F_obs≈2100 L), and most drugs could be widely distributed from blood to target tissues and organs.

化学信息

分子量 728.71
分子式 C32H37F9N4O3S
CAS No. 2991504-90-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础