MGAT2-IN-7 是一种具有口服活性的单酰基甘油酰基转移酶 2 (MGAT2) 抑制剂,可用于肥胖及代谢功能障碍相关脂肪性肝病 (MASLD) 的研究。
产品编号: MS-A84391 CAS No.: 3115123-06-0 分子式: C31H30F3N3O6S 分子量: 629.65
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MGAT2-IN-7 是一种具有口服活性的单酰基甘油酰基转移酶 2 (MGAT2) 抑制剂,可用于肥胖及代谢功能障碍相关脂肪性肝病 (MASLD) 的研究。

生物实验数据

生物活性 MGAT2-IN-7 is an orally active monoacylglycerol acyltransferase 2 (MGAT2) inhibitor that can be used for research on obesity and metabolic dysfunction-associated steatotic liver disease (MASLD).
体外研究
(In Vitro)

MGAT2-IN-7 (compound 27Q) 可在体外巯基荧光酶分析实验中强效抑制人单酰基甘油酰基转移酶 2,其 IC50 值<1 μM。

体内研究
(In Vivo)

MGAT2-IN-7 (compound 27Q) (15-50 mg/kg,灌胃给药,每日 1 次,连续 7 天) 可在饮食诱导肥胖小鼠中引发剂量依赖性体重下降并减少食物摄入。
MGAT2-IN-7 (50 mg/kg;灌胃;每日一次;连续 22 天) 与 GLP-1 受体激动剂联用时,可协同增强肥胖小鼠的减重效果并减少食物摄入。

Animal Model: C57BL/6J mice (male, 16 weeks old, diet-induced obese)
Dosage: 15 mg/kg; 50 mg/kg
Administration: p.o.; daily; 7 days
Result: Reduced average body weight by 1.39 g (3.6%) over 7 days, with 10% less 24-hour food intake and 9% less 7-day cumulative food.
Reduced average body weight by 2.5 g (6.8%) over 7 days, with 17% less 24-hour food intake and 20% less 7-day cumulative food.
Animal Model: C57BL/6J mice (male, diet-induced obese)
Dosage: 50 mg/kg
Administration: p.o.; daily; 22 days
Result: Increased body weight reduction from -17.8% (tirzepatide alone) to -38% at 17 days and reduced cumulative food intake by 84% relative to vehicle controls (a 4-fold additional reduction over tirzepatide alone) when combined with maximum dose tirzepatide.
Increased body weight reduction from -32% (semaglutide alone) to -74.3% at 17 days and reduced cumulative food intake by 77% relative to vehicle controls (a 3.3-fold additional reduction over semaglutide alone) when combined with maximum dose semaglutide.
All differences were statistically significant.

化学信息

分子量 629.65
分子式 C31H30F3N3O6S
CAS No. 3115123-06-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础