Pelrinone 是一种具有口服活性的强心剂和 PDE III 抑制剂(IC50 为 36 μM),可提升细胞内 cAMP 水平,其作用不依赖 β-肾上腺素能受体,也不抑制 Na+/K+-ATPase,能发挥正性肌力作用和血管舒张作用,同时抑制血小板聚集、减少血栓形成并发挥弱抗凝活性,且不改变血细胞比容或循环血小板计数,可用于充血性心力衰竭和冠状动脉血栓形成的相关研究。
产品编号: MS-A81680 CAS No.: 94386-65-9 分子式: C12H11N5O 分子量: 241.25
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Pelrinone 是一种具有口服活性的强心剂和 PDE III 抑制剂(IC50 为 36 μM),可提升细胞内 cAMP 水平,其作用不依赖 β-肾上腺素能受体,也不抑制 Na+/K+-ATPase,能发挥正性肌力作用和血管舒张作用,同时抑制血小板聚集、减少血栓形成并发挥弱抗凝活性,且不改变血细胞比容或循环血小板计数,可用于充血性心力衰竭和冠状动脉血栓形成的相关研究。

生物实验数据

生物活性 Pelrinone is an orally active cardiotonic agent and PDE III inhibitor with an IC50 of 36 μM that elevates intracellular cAMP levels, acts independently of β-adrenergic receptors without inhibiting Na+/K+-ATPase, exerts positive inotropic and vasodilatory effects, inhibits platelet aggregation, reduces thrombus formation, and exhibits weak anticoagulant activity without altering hematocrit or circulating platelet counts, and can be used in research related to congestive heart failure and coronary thrombosis.
IC50 & Target

PDE Ⅲ

36 μM (IC50)

体外研究
(In Vitro)

Pelrinone 可抑制牛心脏粗提物 PDE,其 IC50 为 76 μM;还可抑制纯化的牛心脏 PDE 组分 III,其 IC50 为 36 μM,对 cAMP 特异性的组分 III 同工酶表现出更强的活性。
Pelrinone (不同浓度;预孵育 3 分钟) 可抑制 Arachidonic acid (MS-A69140)、U46619 (MS-O09517)、Collagen、第二相肾上腺素及第二相二磷酸腺苷诱导的富血小板血浆聚集,其 IC50 值分别为 2.8、6.6、13.3、18.6 和 11.8 μM。

体内研究
(In Vivo)

Pelrinone (0.01-1.0 mg/kg;静脉注射;每 30 分钟 1 次;0.2 mg/kg;十二指肠内给予) 可在戊巴比妥诱导心力衰竭的麻醉犬中产生剂量依赖性的正性肌力作用和轻度血管舒张作用,其静脉给予的 ED20/ED50 比值为 4,十二指肠内给予的该比值 >15,表明肠内给药具有更高的心脏特异性。
Pelrinone (2.0 mg/kg;口服;单次) 可增强清醒犬的左心室收缩力、提升心率并短暂降低血压。
Pelrinone (0.25-5.00 mg/kg;静脉注射;单次推注) 可在兔动静脉分流模型中剂量依赖性地抑制白色血栓形成,在最高测试剂量 5.00 mg/kg i.v 时抑制率达 76.7%。
Pelrinone (0.625-2.5 mg/kg;静脉注射;10% 推注,90% 持续输注 4.5 小时) 在犬冠状动脉血栓模型中发挥抗血栓活性,抑制肾上腺素致敏的血小板聚集,并产生剂量依赖性血流动力学效应,包括低血压、心动过速和心肌收缩力增强。

Animal Model: Unselected breed/sex, 10-20 kg (pentobarbital-induced congestive heart failure)
Dosage: 0.01-1.0 mg/kg (i.v.); 0.2 mg/kg (i.d.)
Administration: i.v. (every 30 minutes, non-cumulative); i.d. (single dose)
Result: Achieved an ED50 of 0.03 mg/kg for increasing peak positive dP/dt by 50% and an ED20 of 0.12 mg/kg for reducing mean arterial blood pressure by 20% via intravenous administration, resulting in an ED20/ED50 ratio of 4.
Produced a dose-related increase in myocardial contractility (dP/dt max) from 11% to 222% relative to failed control via intravenous doses of 0.01-1.0 mg/kg.
Produced a dose-related increase in heart rate from 4% to 52% relative to failed control via intravenous doses of 0.01-1.0 mg/kg.
Produced a dose-related reduction in mean aortic blood pressure from 0 to 38% relative to failed control via intravenous doses of 0.01-1.0 mg/kg.
Achieved an ED50 of 0.2 mg/kg for increased dP/dt and an ED20 of >3 mg/kg for blood pressure reduction via intraduodenal administration, resulting in an ED20/ED50 ratio of >15.
Animal Model: Unselected breed/sex, with chronically implanted Konigsberg left ventricular pressure transducers
Dosage: 2.0 mg/kg
Administration: p.o. (single dose; monitored for 6 hours)
Result: Showed a slightly more rapid onset of action and longer duration of action compared to milrinone and compound 49.
Increased heart rate and decreased mean blood pressure that lasted during the first 2.5 hours post-dosing.
Increased left ventricular dP/dt.
Animal Model: New Zealand rabbits (male, 2.0-2.5 kg)
Dosage: 0.25 mg/kg; 0.50 mg/kg; 1.00 mg/kg; 5.00 mg/kg
Administration: i.v.; single bolus
Result: Reduced white thrombus formation (platelet accretion) by 7.3% at 0.25 mg/kg.
Reduced white thrombus formation (platelet accretion) by 41.7% at 0.50 mg/kg.
Reduced white thrombus formation (platelet accretion) by 56.8% at 1.00 mg/kg.
Reduced white thrombus formation (platelet accretion) by 76.7% at 5.00 mg/kg.

化学信息

分子量 241.25
分子式 C12H11N5O
CAS No. 94386-65-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础