SKLB-0124 是一种有效的 PRMT6 降解剂,在 HCC827 和 MDA-MB-435 细胞中的 DC50 分别为 15.4 μM 和 16.4 μM,对 PRMT6 的 IC50 值为 1.6 μM,不降解 PRMT1 或 PRMT8,可诱导蛋白酶体依赖性的 PRMT6 降解并显著抑制细胞增殖,有效诱导细胞凋亡 (apoptosis) 和细胞周期停滞,可用于肺癌和乳腺癌的研究。
产品编号: MS-A79320 CAS No.: 3065966-31-3 分子式: C32H45N5O2 分子量: 531.73
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SKLB-0124 是一种有效的 PRMT6 降解剂,在 HCC827 和 MDA-MB-435 细胞中的 DC50 分别为 15.4 μM 和 16.4 μM,对 PRMT6 的 IC50 值为 1.6 μM,不降解 PRMT1 或 PRMT8,可诱导蛋白酶体依赖性的 PRMT6 降解并显著抑制细胞增殖,有效诱导细胞凋亡 (apoptosis) 和细胞周期停滞,可用于肺癌和乳腺癌的研究。

生物实验数据

生物活性 SKLB-0124 is a potent PRMT6 degrader with DC50 values of 15.4 μM and 16.4 μM in HCC827 and MDA-MB-435 cells, respectively, and an IC50 value of 1.6 μM against PRMT6; it does not degrade PRMT1 or PRMT8, induces proteasome-dependent PRMT6 degradation and significantly inhibits cell proliferation, effectively induces apoptosis and cell cycle arrest, and can be used for research on lung cancer and breast cancer.
IC50 & Target PRMT6:15.4 nM (DC50)
体外研究
(In Vitro)

SKLB-0124 (1.25-20 μM, 0.5-7 d) 表现出非急性降解动力学,通过泛素蛋白酶体系统 (UPS) 通路在 MDA-MB-435 细胞和 HCC827 细胞中以适当的速率降解 PRMT6,且不产生钩状效应。
SKLB-0124 (0-10 μM, 6 d) 抑制细胞增殖,对 HCC827 和 MDA-MB-435 细胞的 IC50 分别为 6.66 和 5.68 μM。
SKLB-0124 (10-20 μM, 3 d) 以浓度依赖性方式导致 MDA-MB-435 细胞和 HCC827 细胞的 G0/G1 期阻滞。
SKLB-0124 (15-90 μM, 9 d) 对正常 HEK293 和 HEK293T 细胞的毒性较低。

Cell Cycle Analysis

Cell Line: MDA-MB-435 cells and HCC827 cells
Concentration: 10 and 20 μM
Incubation Time: 3 d
Result: Caused the G0/G1 arrest pattern in a concentration dependent manner, with a concomitant decrease of cells in other phases of the cell cycle.

Apoptosis Analysis

Cell Line: MDA-MB-435 cells and HCC827 cells
Concentration: 10 and 20 μM
Incubation Time: 6 d
Result: Induced apoptosis in 78.41% of the HCC827 cells and 90.1% of the MDA-MB-435 cells at 20 μM.

Western Blot Analysis

Cell Line: MDA-MB-435 cells and HCC827 cells
Concentration: 1.25, 2.5, 5, 10 and 20 μM
Incubation Time: 0.5, 1, 3, 5 and 7 d
Result: Significantly and dose-dependently reduced the expression of PRMT6 protein.
Observed that after 5 days of PRMT6 degradation, there was a significant degradation after 7 days.
Significantly degraded PRMT6 but did not degrade PRMT1 or PRMT8.

化学信息

分子量 531.73
分子式 C32H45N5O2
CAS No. 3065966-31-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础