Anticancer agent 300

Anticancer agent 300(compound P14)是一种具有抗增殖、细胞周期调控、诱导衰老和诱导凋亡活性的 CCND1、CDK4、CDK6 及 CCNE1 调节剂,可用于 ER+/HER2− 乳腺癌和 BRAF 突变型黑色素瘤的研究。
产品编号: MS-A52368 CAS No.: 1310059-06-3 分子式: C24H19N3Os2 分子量: 429.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Anticancer agent 300(compound P14)是一种具有抗增殖、细胞周期调控、诱导衰老和诱导凋亡活性的 CCND1、CDK4、CDK6 及 CCNE1 调节剂,可用于 ER+/HER2− 乳腺癌和 BRAF 突变型黑色素瘤的研究。

生物实验数据

生物活性 Anticancer agent 300 (compound P14) is a CCND1, CDK4, CDK6, and CCNE1 modulator with antiproliferative, cell cycle regulatory, senescence-inducing, and apoptosis-inducing activities, and can be used for research on ER+/HER2− breast cancer and BRAF-mutant melanoma.
体外研究
(In Vitro)

Anticancer agent 300 (P14) (5-50 μM;作用 7 天) 可显著降低 MCF7 和 A375 细胞的集落形成能力,并在高浓度下对非肿瘤性 TC28a2 细胞产生细胞毒性。
Anticancer agent 300 (P14) (5-50 μM;作用 7 天) 在 MCF7 细胞中的 IC50为 2.018 μM,在 A375 细胞中的 IC50为 1.887 μM。
Anticancer agent 300 (P14)(5 μM;作用 12 天) 可显著缩小 MCF7 和 A375 三维培养模型中的球状体面积。
Anticancer agent 300 (P14) (5 μM;作用 7 天) 可降低 MCF7 和 A375 细胞中 G2/M 期细胞的比例。
Anticancer agent 300 (P14) (5 μM;作用 7 天) 以细胞类型特异性方式调控细胞周期相关基因的表达,上调 MCF7 细胞中的 G1/S 转换基因,同时下调 A375 细胞中的该类基因。
Anticancer agent 300 (P14)(5 μM;作用 7 天) 可上调MCF7与A375细胞中衰老相关基因的表达。
Anticancer agent 300 (P14)(5 μM;作用 7 天) 可上调 MCF7 细胞中的 SASP 因子,同时减少 A375 细胞中该因子的合成。
Anticancer agent 300 (P14)(5 μM;7 天) 可诱导 MCF7 和 A375 细胞的细胞死亡水平升高并促进早期凋亡。

Cell Proliferation Assay

Cell Line: MCF7, A375, TC28a2
Concentration: 5, 20, 35, 50 μM
Incubation Time: 7 days
Result: Significantly reduced the colony-forming capacity of MCF7 and A375 cells in a dose-dependent manner. Demonstrated potent anti-proliferative effects even at 5 μM in both cell lines. Induced cytotoxicity in non-tumoral TC28a2 cells at high concentrations (up to 20 μM).

Cell Proliferation Assay

Cell Line: MCF7, A375
Concentration: 5, 20, 35, 50 μM
Incubation Time: 7 days
Result: Achieved an IC50 of 2.018 μM in MCF7 cells and 1.887 μM in A375 cells.

Cell Proliferation Assay

Cell Line: MCF7, A375
Concentration: 5 μM
Incubation Time: 12 days
Result: Significantly reduced spheroid area in MCF7 cells after 8 and 12 days of treatment, and in A375 cells with a less marked but still statistically significant reduction.

Cell Cycle Analysis

Cell Line: MCF7, A375
Concentration: 5 μM
Incubation Time: 7 days
Result: Reduced the proportion of cells in the G2 phase in both cell lines: decreased MCF7 cells' G2/M phase proportion from 26.25% (control) to 13.10%, and A375 cells' G2/M phase proportion from 5.44% (control) to 0.52%.

Real Time qPCR

Cell Line: MCF7, A375
Concentration: 5 μM
Incubation Time: 7 days
Result: Significantly upregulated genes associated with G1/S transition and S-phase entry in MCF7 cells. Significantly downregulated key regulators of the G1/S transition and S-phase entry, including CCND1, CDK4, CDK6, and CCNE1, in A375 cells.\nNotably increased the expression of senescence-associated factors, including p21, p53, and p53-responsive genes (IGFBP3 and GDF15), in both cell lines.\nSignificantly upregulated classical SASP components, including IL-6 and IL-8, in MCF7 cells. Showed a trend toward reduced synthesis of SASP factors in A375 cells.

Apoptosis Analysis

Cell Line: MCF7, A375
Concentration: 5 μM
Incubation Time: 7 days
Result: Showed a tendency to increase cell death and the proportion of cells undergoing early apoptosis in both cell lines.

化学信息

分子量 429.56
分子式 C24H19N3Os2
CAS No. 1310059-06-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础